instance_tc1.h 9.72 KB
/* ----------------------------------------------------------------------------
 *         SAM Software Package License
 * ----------------------------------------------------------------------------
 * Copyright (c) 2012, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following condition is met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef _SAM3XA_TC1_INSTANCE_
#define _SAM3XA_TC1_INSTANCE_

#ifdef __cplusplus
extern "C" {
#endif

/* ========== Register definition for TC1 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_TC1_CCR0           (0x40084000U) /**< \brief (TC1) Channel Control Register (channel = 0) */
#define REG_TC1_CMR0           (0x40084004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */
#define REG_TC1_SMMR0          (0x40084008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */
#define REG_TC1_CV0            (0x40084010U) /**< \brief (TC1) Counter Value (channel = 0) */
#define REG_TC1_RA0            (0x40084014U) /**< \brief (TC1) Register A (channel = 0) */
#define REG_TC1_RB0            (0x40084018U) /**< \brief (TC1) Register B (channel = 0) */
#define REG_TC1_RC0            (0x4008401CU) /**< \brief (TC1) Register C (channel = 0) */
#define REG_TC1_SR0            (0x40084020U) /**< \brief (TC1) Status Register (channel = 0) */
#define REG_TC1_IER0           (0x40084024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */
#define REG_TC1_IDR0           (0x40084028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */
#define REG_TC1_IMR0           (0x4008402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */
#define REG_TC1_CCR1           (0x40084040U) /**< \brief (TC1) Channel Control Register (channel = 1) */
#define REG_TC1_CMR1           (0x40084044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */
#define REG_TC1_SMMR1          (0x40084048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */
#define REG_TC1_CV1            (0x40084050U) /**< \brief (TC1) Counter Value (channel = 1) */
#define REG_TC1_RA1            (0x40084054U) /**< \brief (TC1) Register A (channel = 1) */
#define REG_TC1_RB1            (0x40084058U) /**< \brief (TC1) Register B (channel = 1) */
#define REG_TC1_RC1            (0x4008405CU) /**< \brief (TC1) Register C (channel = 1) */
#define REG_TC1_SR1            (0x40084060U) /**< \brief (TC1) Status Register (channel = 1) */
#define REG_TC1_IER1           (0x40084064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */
#define REG_TC1_IDR1           (0x40084068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */
#define REG_TC1_IMR1           (0x4008406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */
#define REG_TC1_CCR2           (0x40084080U) /**< \brief (TC1) Channel Control Register (channel = 2) */
#define REG_TC1_CMR2           (0x40084084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */
#define REG_TC1_SMMR2          (0x40084088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */
#define REG_TC1_CV2            (0x40084090U) /**< \brief (TC1) Counter Value (channel = 2) */
#define REG_TC1_RA2            (0x40084094U) /**< \brief (TC1) Register A (channel = 2) */
#define REG_TC1_RB2            (0x40084098U) /**< \brief (TC1) Register B (channel = 2) */
#define REG_TC1_RC2            (0x4008409CU) /**< \brief (TC1) Register C (channel = 2) */
#define REG_TC1_SR2            (0x400840A0U) /**< \brief (TC1) Status Register (channel = 2) */
#define REG_TC1_IER2           (0x400840A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */
#define REG_TC1_IDR2           (0x400840A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */
#define REG_TC1_IMR2           (0x400840ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */
#define REG_TC1_BCR            (0x400840C0U) /**< \brief (TC1) Block Control Register */
#define REG_TC1_BMR            (0x400840C4U) /**< \brief (TC1) Block Mode Register */
#define REG_TC1_QIER           (0x400840C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */
#define REG_TC1_QIDR           (0x400840CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */
#define REG_TC1_QIMR           (0x400840D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */
#define REG_TC1_QISR           (0x400840D4U) /**< \brief (TC1) QDEC Interrupt Status Register */
#define REG_TC1_FMR            (0x400840D8U) /**< \brief (TC1) Fault Mode Register */
#define REG_TC1_WPMR           (0x400840E4U) /**< \brief (TC1) Write Protect Mode Register */
#else
#define REG_TC1_CCR0  (*(WoReg*)0x40084000U) /**< \brief (TC1) Channel Control Register (channel = 0) */
#define REG_TC1_CMR0  (*(RwReg*)0x40084004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */
#define REG_TC1_SMMR0 (*(RwReg*)0x40084008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */
#define REG_TC1_CV0   (*(RoReg*)0x40084010U) /**< \brief (TC1) Counter Value (channel = 0) */
#define REG_TC1_RA0   (*(RwReg*)0x40084014U) /**< \brief (TC1) Register A (channel = 0) */
#define REG_TC1_RB0   (*(RwReg*)0x40084018U) /**< \brief (TC1) Register B (channel = 0) */
#define REG_TC1_RC0   (*(RwReg*)0x4008401CU) /**< \brief (TC1) Register C (channel = 0) */
#define REG_TC1_SR0   (*(RoReg*)0x40084020U) /**< \brief (TC1) Status Register (channel = 0) */
#define REG_TC1_IER0  (*(WoReg*)0x40084024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */
#define REG_TC1_IDR0  (*(WoReg*)0x40084028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */
#define REG_TC1_IMR0  (*(RoReg*)0x4008402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */
#define REG_TC1_CCR1  (*(WoReg*)0x40084040U) /**< \brief (TC1) Channel Control Register (channel = 1) */
#define REG_TC1_CMR1  (*(RwReg*)0x40084044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */
#define REG_TC1_SMMR1 (*(RwReg*)0x40084048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */
#define REG_TC1_CV1   (*(RoReg*)0x40084050U) /**< \brief (TC1) Counter Value (channel = 1) */
#define REG_TC1_RA1   (*(RwReg*)0x40084054U) /**< \brief (TC1) Register A (channel = 1) */
#define REG_TC1_RB1   (*(RwReg*)0x40084058U) /**< \brief (TC1) Register B (channel = 1) */
#define REG_TC1_RC1   (*(RwReg*)0x4008405CU) /**< \brief (TC1) Register C (channel = 1) */
#define REG_TC1_SR1   (*(RoReg*)0x40084060U) /**< \brief (TC1) Status Register (channel = 1) */
#define REG_TC1_IER1  (*(WoReg*)0x40084064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */
#define REG_TC1_IDR1  (*(WoReg*)0x40084068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */
#define REG_TC1_IMR1  (*(RoReg*)0x4008406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */
#define REG_TC1_CCR2  (*(WoReg*)0x40084080U) /**< \brief (TC1) Channel Control Register (channel = 2) */
#define REG_TC1_CMR2  (*(RwReg*)0x40084084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */
#define REG_TC1_SMMR2 (*(RwReg*)0x40084088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */
#define REG_TC1_CV2   (*(RoReg*)0x40084090U) /**< \brief (TC1) Counter Value (channel = 2) */
#define REG_TC1_RA2   (*(RwReg*)0x40084094U) /**< \brief (TC1) Register A (channel = 2) */
#define REG_TC1_RB2   (*(RwReg*)0x40084098U) /**< \brief (TC1) Register B (channel = 2) */
#define REG_TC1_RC2   (*(RwReg*)0x4008409CU) /**< \brief (TC1) Register C (channel = 2) */
#define REG_TC1_SR2   (*(RoReg*)0x400840A0U) /**< \brief (TC1) Status Register (channel = 2) */
#define REG_TC1_IER2  (*(WoReg*)0x400840A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */
#define REG_TC1_IDR2  (*(WoReg*)0x400840A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */
#define REG_TC1_IMR2  (*(RoReg*)0x400840ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */
#define REG_TC1_BCR   (*(WoReg*)0x400840C0U) /**< \brief (TC1) Block Control Register */
#define REG_TC1_BMR   (*(RwReg*)0x400840C4U) /**< \brief (TC1) Block Mode Register */
#define REG_TC1_QIER  (*(WoReg*)0x400840C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */
#define REG_TC1_QIDR  (*(WoReg*)0x400840CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */
#define REG_TC1_QIMR  (*(RoReg*)0x400840D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */
#define REG_TC1_QISR  (*(RoReg*)0x400840D4U) /**< \brief (TC1) QDEC Interrupt Status Register */
#define REG_TC1_FMR   (*(RwReg*)0x400840D8U) /**< \brief (TC1) Fault Mode Register */
#define REG_TC1_WPMR  (*(RwReg*)0x400840E4U) /**< \brief (TC1) Write Protect Mode Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#ifdef __cplusplus
}
#endif

#endif /* _SAM3XA_TC1_INSTANCE_ */