/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */

/** \mainpage CCID Device Demo
 *
 *  \section Sec_Compat Demo Compatibility:
 *
 *  The following list indicates what microcontrollers are compatible with this demo.
 *
 *  \li Series 7 USB AVRs (AT90USBxxx7)
 *  \li Series 6 USB AVRs (AT90USBxxx6)
 *  \li Series 4 USB AVRs (ATMEGAxxU4)
 *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
 *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
 *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
 *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
 *
 *  \section Sec_Info USB Information:
 *
 *  The following table gives a rundown of the USB utilization of this demo.
 *
 *  <table>
 *   <tr>
 *    <td><b>USB Mode:</b></td>
 *    <td>Device</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Class:</b></td>
 *    <td>CCID Class</td>
 *   </tr>
  *   <tr>
 *    <td><b>USB Subclass:</b></td>
 *    <td>None</td>
 *   </tr>
 *    <td><b>Relevant Standards:</b></td>
 *    <td>USB CCID 1.1 Specification for Integrated Circuit(s) Cards Interface Devices</td>
 *    <td>ISO 7816-3</td>
 *   </tr>
 *   <tr>
 *    <td><b>Supported USB Speeds:</b></td>
 *    <td>Full Speed Mode</td>
 *   </tr>
 *  </table>
 *
 *  \section Sec_Description Project Description:
 *
 *  CCID demonstration application. This gives a simple reference
 *  application for implementing a USB CCID device. If you want to test this
 *  in Linux, you must change the following file:
 *  /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
 *  and add a VID, PID and friendly name.
 *
 *  This device was not tested on Windows.
 *
 *  On start-up the system will automatically enumerate and function
 *  as a CCID device with one slot already inserted. Upon detection, the device
 *  will send an ATR to the device, which can use it to determine
 *  host capabilities. Developers can use user applications to send APDUs
 *  back and forth to the device
 *
 */