Blame view

lufa-master/Demos/Device/LowLevel/Joystick/Joystick.txt 2.11 KB
142ecdaf   rguillom   first commit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
  /** \file
   *
   *  This file contains special DoxyGen information for the generation of the main page and other special
   *  documentation pages. It is not a project source file.
   */
  
  /** \mainpage Joystick Device Demo
   *
   *  \section Sec_Compat Demo Compatibility:
   *
   *  The following list indicates what microcontrollers are compatible with this demo.
   *
   *  \li Series 7 USB AVRs (AT90USBxxx7)
   *  \li Series 6 USB AVRs (AT90USBxxx6)
   *  \li Series 4 USB AVRs (ATMEGAxxU4)
   *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
   *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
   *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
   *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
   *
   *  \section Sec_Info USB Information:
   *
   *  The following table gives a rundown of the USB utilization of this demo.
   *
   *  <table>
   *   <tr>
   *    <td><b>USB Mode:</b></td>
   *    <td>Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Class:</b></td>
   *    <td>Human Interface Device (HID)</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Subclass:</b></td>
   *    <td>N/A</td>
   *   </tr>
   *   <tr>
   *    <td><b>Relevant Standards:</b></td>
   *    <td>USBIF HID Specification \n
   *        USBIF HID Usage Tables</td>
   *   </tr>
   *   <tr>
   *    <td><b>Supported USB Speeds:</b></td>
   *    <td>Low Speed Mode \n
   *        Full Speed Mode</td>
   *   </tr>
   *  </table>
   *
   *  \section Sec_Description Project Description:
   *
   *  Joystick demonstration application. This gives a simple reference
   *  application for implementing a USB Keyboard device, for USB Joysticks
   *  using the standard Keyboard HID profile.
   *
   *  This device will show up as a generic joystick device, with two buttons.
   *  Pressing the joystick inwards is the first button, and the HWB button
   *  is the second.
   *
   *  Moving the joystick on the selected board moves the joystick location on
   *  the host computer.
   *
   *  Currently only single interface joysticks are supported.
   *
   *  \section Sec_Options Project Options
   *
   *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
   *
   *  <table>
   *   <tr>
   *    <td>
   *     None
   *    </td>
   *   </tr>
   *  </table>
   */