mobeissa / PFE7

system.c 20.5 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 
/**************************************************************************//**
 * @file
 * @brief    CMSIS Cortex-M3 Device Peripheral Access Layer Source File
 *           for the NXP LPC17xx Device Series
 * @version  V1.09
 * @date     09. November 2013
 *
 * @note     Integrated, adopted, and renamed for RIOT by Oliver Hahm.
 *
 * Copyright (C) 2009 ARM Limited. All rights reserved.
 * Copyright (C) 2013 Oliver Hahm <oliver.hahm@inria.fr>
 *
 * @par
 * ARM Limited (ARM) is supplying this software for use with Cortex-M
 * processor based microcontrollers.  This file can be freely distributed
 * within development tools that are supporting such ARM based processors.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
 * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
 * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 *
 ******************************************************************************/

#include "LPC17xx.h"

/*--------------------- Clock Configuration ----------------------------------
 *
 * <e> Clock Configuration
 *   <h> System Controls and Status Register (SCS)
 *     <o1.4>    OSCRANGE: Main Oscillator Range Select
 *                     <0=>  1 MHz to 20 MHz
 *                     <1=> 15 MHz to 24 MHz
 *     <e1.5>       OSCEN: Main Oscillator Enable
 *     </e>
 *   </h>
 *
 *   <h> Clock Source Select Register (CLKSRCSEL)
 *     <o2.0..1>   CLKSRC: PLL Clock Source Selection
 *                     <0=> Internal RC oscillator
 *                     <1=> Main oscillator
 *                     <2=> RTC oscillator
 *   </h>
 *
 *   <e3> PLL0 Configuration (Main PLL)
 *     <h> PLL0 Configuration Register (PLL0CFG)
 *                     <i> F_cco0 = (2 * M * F_in) / N
 *                     <i> F_in must be in the range of 32 kHz to 50 MHz
 *                     <i> F_cco0 must be in the range of 275 MHz to 550 MHz
 *       <o4.0..14>  MSEL: PLL Multiplier Selection
 *                     <6-32768><#-1>
 *                     <i> M Value
 *       <o4.16..23> NSEL: PLL Divider Selection
 *                     <1-256><#-1>
 *                     <i> N Value
 *     </h>
 *   </e>
 *
 *   <e5> PLL1 Configuration (USB PLL)
 *     <h> PLL1 Configuration Register (PLL1CFG)
 *                     <i> F_usb = M * F_osc or F_usb = F_cco1 / (2 * P)
 *                     <i> F_cco1 = F_osc * M * 2 * P
 *                     <i> F_cco1 must be in the range of 156 MHz to 320 MHz
 *       <o6.0..4>   MSEL: PLL Multiplier Selection
 *                     <1-32><#-1>
 *                     <i> M Value (for USB maximum value is 4)
 *       <o6.5..6>   PSEL: PLL Divider Selection
 *                     <0=> 1
 *                     <1=> 2
 *                     <2=> 4
 *                     <3=> 8
 *                     <i> P Value
 *     </h>
 *   </e>
 *
 *   <h> CPU Clock Configuration Register (CCLKCFG)
 *     <o7.0..7>  CCLKSEL: Divide Value for CPU Clock from PLL0
 *                     <1-256><#-1>
 *   </h>
 *
 *   <h> USB Clock Configuration Register (USBCLKCFG)
 *     <o8.0..3>   USBSEL: Divide Value for USB Clock from PLL0
 *                     <0-15>
 *                     <i> Divide is USBSEL + 1
 *   </h>
 *
 *   <h> Peripheral Clock Selection Register 0 (PCLKSEL0)
 *     <o9.0..1>    PCLK_WDT: Peripheral Clock Selection for WDT
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.2..3>    PCLK_TIMER0: Peripheral Clock Selection for TIMER0
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.4..5>    PCLK_TIMER1: Peripheral Clock Selection for TIMER1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.6..7>    PCLK_UART0: Peripheral Clock Selection for UART0
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.8..9>    PCLK_UART1: Peripheral Clock Selection for UART1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.12..13>  PCLK_PWM1: Peripheral Clock Selection for PWM1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.14..15>  PCLK_I2C0: Peripheral Clock Selection for I2C0
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.16..17>  PCLK_SPI: Peripheral Clock Selection for SPI
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.20..21>  PCLK_SSP1: Peripheral Clock Selection for SSP1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.22..23>  PCLK_DAC: Peripheral Clock Selection for DAC
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.24..25>  PCLK_ADC: Peripheral Clock Selection for ADC
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o9.26..27>  PCLK_CAN1: Peripheral Clock Selection for CAN1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 6
 *     <o9.28..29>  PCLK_CAN2: Peripheral Clock Selection for CAN2
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 6
 *     <o9.30..31>  PCLK_ACF: Peripheral Clock Selection for ACF
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 6
 *   </h>
 *
 *   <h> Peripheral Clock Selection Register 1 (PCLKSEL1)
 *     <o10.0..1>   PCLK_QEI: Peripheral Clock Selection for the Quadrature Encoder Interface
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.2..3>   PCLK_GPIO: Peripheral Clock Selection for GPIOs
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.4..5>   PCLK_PCB: Peripheral Clock Selection for the Pin Connect Block
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.6..7>   PCLK_I2C1: Peripheral Clock Selection for I2C1
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.10..11> PCLK_SSP0: Peripheral Clock Selection for SSP0
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.12..13> PCLK_TIMER2: Peripheral Clock Selection for TIMER2
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.14..15> PCLK_TIMER3: Peripheral Clock Selection for TIMER3
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.16..17> PCLK_UART2: Peripheral Clock Selection for UART2
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.18..19> PCLK_UART3: Peripheral Clock Selection for UART3
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.20..21> PCLK_I2C2: Peripheral Clock Selection for I2C2
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.22..23> PCLK_I2S: Peripheral Clock Selection for I2S
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.26..27> PCLK_RIT: Peripheral Clock Selection for the Repetitive Interrupt Timer
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.28..29> PCLK_SYSCON: Peripheral Clock Selection for the System Control Block
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *     <o10.30..31> PCLK_MC: Peripheral Clock Selection for the Motor Control PWM
 *                     <0=> Pclk = Cclk / 4
 *                     <1=> Pclk = Cclk
 *                     <2=> Pclk = Cclk / 2
 *                     <3=> Pclk = Hclk / 8
 *   </h>
 *
 *   <h> Power Control for Peripherals Register (PCONP)
 *     <o11.1>      PCTIM0: Timer/Counter 0 power/clock enable
 *     <o11.2>      PCTIM1: Timer/Counter 1 power/clock enable
 *     <o11.3>      PCUART0: UART 0 power/clock enable
 *     <o11.4>      PCUART1: UART 1 power/clock enable
 *     <o11.6>      PCPWM1: PWM 1 power/clock enable
 *     <o11.7>      PCI2C0: I2C interface 0 power/clock enable
 *     <o11.8>      PCSPI: SPI interface power/clock enable
 *     <o11.9>      PCRTC: RTC power/clock enable
 *     <o11.10>     PCSSP1: SSP interface 1 power/clock enable
 *     <o11.12>     PCAD: A/D converter power/clock enable
 *     <o11.13>     PCCAN1: CAN controller 1 power/clock enable
 *     <o11.14>     PCCAN2: CAN controller 2 power/clock enable
 *     <o11.15>     PCGPIO: GPIOs power/clock enable
 *     <o11.16>     PCRIT: Repetitive interrupt timer power/clock enable
 *     <o11.17>     PCMC: Motor control PWM power/clock enable
 *     <o11.18>     PCQEI: Quadrature encoder interface power/clock enable
 *     <o11.19>     PCI2C1: I2C interface 1 power/clock enable
 *     <o11.21>     PCSSP0: SSP interface 0 power/clock enable
 *     <o11.22>     PCTIM2: Timer 2 power/clock enable
 *     <o11.23>     PCTIM3: Timer 3 power/clock enable
 *     <o11.24>     PCUART2: UART 2 power/clock enable
 *     <o11.25>     PCUART3: UART 3 power/clock enable
 *     <o11.26>     PCI2C2: I2C interface 2 power/clock enable
 *     <o11.27>     PCI2S: I2S interface power/clock enable
 *     <o11.29>     PCGPDMA: GP DMA function power/clock enable
 *     <o11.30>     PCENET: Ethernet block power/clock enable
 *     <o11.31>     PCUSB: USB interface power/clock enable
 *   </h>
 *
 *   <h> Clock Output Configuration Register (CLKOUTCFG)
 *     <o12.0..3>   CLKOUTSEL: Selects clock source for CLKOUT
 *                     <0=> CPU clock
 *                     <1=> Main oscillator
 *                     <2=> Internal RC oscillator
 *                     <3=> USB clock
 *                     <4=> RTC oscillator
 *     <o12.4..7>   CLKOUTDIV: Selects clock divider for CLKOUT
 *                     <1-16><#-1>
 *     <o12.8>      CLKOUT_EN: CLKOUT enable control
 *   </h>
 *
 * </e>
 */
#define CLOCK_SETUP           1
#define SCS_Val               0x00000020
#define CLKSRCSEL_Val         0x00000001
#define PLL0_SETUP            1
#define PLL0CFG_Val           0x00050063
#define PLL1_SETUP            1
#define PLL1CFG_Val           0x00000023
#define CCLKCFG_Val           0x00000003
#define USBCLKCFG_Val         0x00000000
#define PCLKSEL0_Val          0x00000000
#define PCLKSEL1_Val          0x00000000
#define PCONP_Val             0x042887DE
#define CLKOUTCFG_Val         0x00000000


/* --------------------- Flash Accelerator Configuration ----------------------
 *
 * <e> Flash Accelerator Configuration
 *   <o1.12..15> FLASHTIM: Flash Access Time
 *               <0=> 1 CPU clock (for CPU clock up to 20 MHz)
 *               <1=> 2 CPU clocks (for CPU clock up to 40 MHz)
 *               <2=> 3 CPU clocks (for CPU clock up to 60 MHz)
 *               <3=> 4 CPU clocks (for CPU clock up to 80 MHz)
 *               <4=> 5 CPU clocks (for CPU clock up to 100 MHz)
 *               <5=> 6 CPU clocks (for any CPU clock)
 * </e>
 */
#define FLASH_SETUP           1
#define FLASHCFG_Val          0x00004000

/*
 * -------- <<< end of configuration section >>> ------------------------------
 */

/*
 * Check the register settings
 */
#define CHECK_RANGE(val, min, max)                ((val < min) || (val > max))
#define CHECK_RSVD(val, mask)                     (val & mask)

/* Clock Configuration */
#if (CHECK_RSVD((SCS_Val),       ~0x00000030))
#error "SCS: Invalid values of reserved bits!"
#endif

#if (CHECK_RANGE((CLKSRCSEL_Val), 0, 2))
#error "CLKSRCSEL: Value out of range!"
#endif

#if (CHECK_RSVD((PLL0CFG_Val),   ~0x00FF7FFF))
#error "PLL0CFG: Invalid values of reserved bits!"
#endif

#if (CHECK_RSVD((PLL1CFG_Val),   ~0x0000007F))
#error "PLL1CFG: Invalid values of reserved bits!"
#endif

#if (PLL0_SETUP)            /* if PLL0 is used */
#if (CCLKCFG_Val < 2)     /* CCLKSEL must be greater then 1 */
#error "CCLKCFG: CCLKSEL must be greater then 1 if PLL0 is used!"
#endif
#endif

#if (CHECK_RANGE((CCLKCFG_Val), 2, 255))
#error "CCLKCFG: Value out of range!"
#endif

#if (CHECK_RSVD((USBCLKCFG_Val), ~0x0000000F))
#error "USBCLKCFG: Invalid values of reserved bits!"
#endif

#if (CHECK_RSVD((PCLKSEL0_Val),   0x000C0C00))
#error "PCLKSEL0: Invalid values of reserved bits!"
#endif

#if (CHECK_RSVD((PCLKSEL1_Val),   0x03000300))
#error "PCLKSEL1: Invalid values of reserved bits!"
#endif

#if (CHECK_RSVD((PCONP_Val),      0x10100821))
#error "PCONP: Invalid values of reserved bits!"
#endif

#if (CHECK_RSVD((CLKOUTCFG_Val), ~0x000001FF))
#error "CLKOUTCFG: Invalid values of reserved bits!"
#endif

/* Flash Accelerator Configuration */
#if (CHECK_RSVD((FLASHCFG_Val), ~0x0000F000))
#error "FLASHCFG: Invalid values of reserved bits!"
#endif


/*
 * DEFINES
 */

/*
 * Define clocks
 */
#define XTAL        (12000000UL)        /* Oscillator frequency */
#define OSC_CLK     (      XTAL)        /* Main oscillator frequency */
#define RTC_CLK     (   32000UL)        /* RTC oscillator frequency */
#define IRC_OSC     ( 4000000UL)        /* Internal RC oscillator frequency */


/* F_cco0 = (2 * M * F_in) / N */
#define M               (((PLL0CFG_Val      ) & 0x7FFF) + 1)
#define N               (((PLL0CFG_Val >> 16) & 0x00FF) + 1)
#define FCCO(F_IN)      ((2ULL * M * F_IN) / N)
#define CCLK_DIV        (((CCLKCFG_Val      ) & 0x00FF) + 1)

/* Determine core clock frequency according to settings */
#if (PLL0_SETUP)
#if   ((CLKSRCSEL_Val & 0x03) == 1)
#define CORE_CLK (FCCO(OSC_CLK) / CCLK_DIV)
#elif ((CLKSRCSEL_Val & 0x03) == 2)
#define CORE_CLK (FCCO(RTC_CLK) / CCLK_DIV)
#else
#define CORE_CLK (FCCO(IRC_OSC) / CCLK_DIV)
#endif
#else
#if   ((CLKSRCSEL_Val & 0x03) == 1)
#define CORE_CLK (OSC_CLK         / CCLK_DIV)
#elif ((CLKSRCSEL_Val & 0x03) == 2)
#define CORE_CLK (RTC_CLK         / CCLK_DIV)
#else
#define CORE_CLK (IRC_OSC         / CCLK_DIV)
#endif
#endif

/*
 * Clock Variable definitions
 */
uint32_t system_clock = CORE_CLK;/*!< System Clock Frequency (Core Clock)*/


/*
 * Clock functions
 */
void SystemCoreClockUpdate(void)            /* Get Core Clock Frequency */
{
    /* Determine clock frequency according to clock register values */
    if (((LPC_SC->PLL0STAT >> 24) & 3) == 3) { /* If PLL0 enabled and connected */
        switch (LPC_SC->CLKSRCSEL & 0x03) {
            case 0:                                /* Int. RC oscillator => PLL0 */
            case 3:                                /* Reserved, default to Int. RC */
                system_clock = (IRC_OSC *
                                ((2ULL * ((LPC_SC->PLL0STAT & 0x7FFF) + 1)))  /
                                (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)       /
                                ((LPC_SC->CCLKCFG & 0xFF) + 1));
                break;

            case 1:                                /* Main oscillator => PLL0 */
                system_clock = (OSC_CLK *
                                ((2ULL * ((LPC_SC->PLL0STAT & 0x7FFF) + 1)))  /
                                (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)       /
                                ((LPC_SC->CCLKCFG & 0xFF) + 1));
                break;

            case 2:                                /* RTC oscillator => PLL0 */
                system_clock = (RTC_CLK *
                                ((2ULL * ((LPC_SC->PLL0STAT & 0x7FFF) + 1)))  /
                                (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)       /
                                ((LPC_SC->CCLKCFG & 0xFF) + 1));
                break;
        }
    }
    else {
        switch (LPC_SC->CLKSRCSEL & 0x03) {
            case 0:                                /* Int. RC oscillator => PLL0 */
            case 3:                                /* Reserved, default to Int. RC */
                system_clock = IRC_OSC / ((LPC_SC->CCLKCFG & 0xFF) + 1);
                break;

            case 1:                                /* Main oscillator => PLL0 */
                system_clock = OSC_CLK / ((LPC_SC->CCLKCFG & 0xFF) + 1);
                break;

            case 2:                                /* RTC oscillator => PLL0 */
                system_clock = RTC_CLK / ((LPC_SC->CCLKCFG & 0xFF) + 1);
                break;
        }
    }

}

/**
 * Initialize the system
 *
 * @brief  Setup the microcontroller system.
 *         Initialize the System. */
void SystemInit(void)
{
#if (CLOCK_SETUP)                       /* Clock Setup */
    LPC_SC->SCS       = SCS_Val;

    if (SCS_Val & (1 << 5)) {             /* If Main Oscillator is enabled */
        while ((LPC_SC->SCS & (1 << 6)) == 0); /* Wait for Oscillator to be ready */
    }

    LPC_SC->CCLKCFG   = CCLKCFG_Val;      /* Setup Clock Divider */

    LPC_SC->PCLKSEL0  = PCLKSEL0_Val;     /* Peripheral Clock Selection */
    LPC_SC->PCLKSEL1  = PCLKSEL1_Val;

    LPC_SC->CLKSRCSEL = CLKSRCSEL_Val;    /* Select Clock Source for PLL0 */

#if (PLL0_SETUP)
    LPC_SC->PLL0CFG   = PLL0CFG_Val;      /* configure PLL0 */
    LPC_SC->PLL0FEED  = 0xAA;
    LPC_SC->PLL0FEED  = 0x55;

    LPC_SC->PLL0CON   = 0x01;             /* PLL0 Enable */
    LPC_SC->PLL0FEED  = 0xAA;
    LPC_SC->PLL0FEED  = 0x55;

    while (!(LPC_SC->PLL0STAT & (1 << 26))); /* Wait for PLOCK0 */

    LPC_SC->PLL0CON   = 0x03;             /* PLL0 Enable & Connect */
    LPC_SC->PLL0FEED  = 0xAA;
    LPC_SC->PLL0FEED  = 0x55;

    while (!(LPC_SC->PLL0STAT & ((1 << 25) | (1 << 24)))); /* Wait for PLLC0_STAT & PLLE0_STAT */

#endif

#if (PLL1_SETUP)
    LPC_SC->PLL1CFG   = PLL1CFG_Val;
    LPC_SC->PLL1FEED  = 0xAA;
    LPC_SC->PLL1FEED  = 0x55;

    LPC_SC->PLL1CON   = 0x01;             /* PLL1 Enable */
    LPC_SC->PLL1FEED  = 0xAA;
    LPC_SC->PLL1FEED  = 0x55;

    while (!(LPC_SC->PLL1STAT & (1 << 10))); /* Wait for PLOCK1 */

    LPC_SC->PLL1CON   = 0x03;             /* PLL1 Enable & Connect */
    LPC_SC->PLL1FEED  = 0xAA;
    LPC_SC->PLL1FEED  = 0x55;

    while (!(LPC_SC->PLL1STAT & ((1 << 9) | (1 << 8)))); /* Wait for PLLC1_STAT & PLLE1_STAT */

#else
    LPC_SC->USBCLKCFG = USBCLKCFG_Val;    /* Setup USB Clock Divider */
#endif

    LPC_SC->PCONP     = PCONP_Val;        /* Power Control for Peripherals */

    LPC_SC->CLKOUTCFG = CLKOUTCFG_Val;    /* Clock Output Configuration */
#endif

#if (FLASH_SETUP == 1)                  /* Flash Accelerator Setup */
    LPC_SC->FLASHCFG  = (LPC_SC->FLASHCFG & ~0x0000F000) | FLASHCFG_Val;
#endif
}