periph_conf.h
3.06 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup board_nrf6310
* @{
*
* @file
* @brief Peripheral MCU configuration for the nRF51 board nrf6310
*
* @author Christian Kühling <kuehling@zedat.fu-berlin.de>
* @author Timo Ziegler <timo.ziegler@fu-berlin.de>
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
* @author Frank Holtz <frank-riot2015@holtznet.de>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock configuration
*
* @note: the radio will not work with the internal RC oscillator!
*
* @{
*/
#define CLOCK_CORECLOCK (16000000U) /* fixed for all NRF51822 */
#define CLOCK_CRYSTAL (16U) /* set to 0: internal RC oscillator
16: 16MHz crystal
32: 32MHz crystal */
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
/* dev, channels, width */
{ NRF_TIMER0, 3, TIMER_BITMODE_BITMODE_24Bit, TIMER0_IRQn }
};
#define TIMER_0_ISR isr_timer0
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_IRQ_PRIO 1
#define RTT_DEV NRF_RTC1
#define RTT_IRQ RTC1_IRQn
#define RTT_ISR isr_rtc1
#define RTT_MAX_VALUE (0xffffff)
#define RTT_FREQUENCY (10) /* in Hz */
#define RTT_PRESCALER (3275U) /* run with 10 Hz */
/** @} */
/**
* @name UART configuration
* @{
*/
#define UART_NUMOF (1U)
#define UART_0_EN 1
#define UART_IRQ_PRIO 1
/* UART pin configuration */
#define UART_PIN_RX 16
#define UART_PIN_TX 17
#define UART_HWFLOWCTRL 0
#define UART_PIN_RTS 19
#define UART_PIN_CTS 18
/** @} */
/**
* @name Radio device configuration
*
* The radio is not guarded by a NUMOF define, as the radio is selected by its
* own module in the build system.
* @{
*/
#define RADIO_IRQ_PRIO 1
/** @} */
/**
* @name SPI configuration
* @{
*/
#define SPI_NUMOF (2U)
#define SPI_0_EN 1
#define SPI_1_EN 1
#define SPI_IRQ_PRIO 1
/* SPI Master 0 pin configuration */
#define SPI_0_DEV NRF_SPI0
#define SPI_0_PIN_SCK 23
#define SPI_0_PIN_MISO 22
#define SPI_0_PIN_MOSI 20
/* SPI Master 1 pin configuration */
#define SPI_1_DEV NRF_SPI1
#define SPI_1_PIN_SCK 16
#define SPI_1_PIN_MISO 17
#define SPI_1_PIN_MOSI 18
/** @} */
/**
* @brief ADC configuration
*
* The configuration consists simply of a list of channels that should be used
* @{
*/
#define ADC_NUMOF (0)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */