Makefile
2.71 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
# name of your application
APPLICATION = gnrc_border_router
# If no BOARD is found in the environment, use this default:
BOARD ?= samr21-xpro
# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/../..
BOARD_INSUFFICIENT_MEMORY := airfy-beacon cc2650stk msb-430 msb-430h pca10000 pca10005 \
nrf51dongle nrf6310 nucleo-f103 nucleo-f334 \
spark-core stm32f0discovery telosb \
weio wsn430-v1_3b wsn430-v1_4 yunjia-nrf51822 z1 nucleo-f072 \
nucleo-f030 nucleo-f070 microbit calliope-mini
# use ethos (ethernet over serial) for network communication and stdio over
# UART, but not on native, as native has a tap interface towards the host.
ifeq (,$(filter native,$(BOARD)))
GNRC_NETIF_NUMOF := 2
USEMODULE += ethos gnrc_netdev2
# ethos baudrate can be configured from make command
ETHOS_BAUDRATE ?= 115200
CFLAGS += '-DETHOS_UART=UART_DEV(0)' -DETHOS_BAUDRATE=$(ETHOS_BAUDRATE) -DUSE_ETHOS_FOR_STDIO
FEATURES_REQUIRED += periph_uart
endif
# Include packages that pull up and auto-init the link layer.
# NOTE: 6LoWPAN will be included if IEEE802.15.4 devices are present
USEMODULE += gnrc_netdev_default
USEMODULE += auto_init_gnrc_netif
# Specify the mandatory networking modules for 6LoWPAN border router
USEMODULE += gnrc_sixlowpan_border_router_default
# Add forwarding table
USEMODULE += fib
# Additional networking modules that can be dropped if not needed
USEMODULE += gnrc_icmpv6_echo
# Add also the shell, some shell commands
USEMODULE += shell
USEMODULE += shell_commands
USEMODULE += ps
# include UHCP client
USEMODULE += gnrc_uhcpc
# Comment this out to disable code in RIOT that does safety checking
# which is not needed in a production environment but helps in the
# development process:
CFLAGS += -DDEVELHELP
# Change this to 0 show compiler invocation lines by default:
QUIET ?= 1
TAP ?= tap0
IPV6_PREFIX ?= 2001:db8::/64
include $(RIOTBASE)/Makefile.include
.PHONY: host-tools
term: host-tools
$(AD)sudo sh $(RIOTBASE)/dist/tools/ethos/start_network.sh $(PORT) $(TAP) $(IPV6_PREFIX)
host-tools:
$(AD)env -u CC -u CFLAGS make -C $(RIOTBASE)/dist/tools
# Set a custom channel if needed
ifneq (,$(filter cc110x,$(USEMODULE))) # radio is cc110x sub-GHz
DEFAULT_CHANNEL ?= 0
CFLAGS += -DCC110X_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
else
ifneq (,$(filter at86rf212b,$(USEMODULE))) # radio is IEEE 802.15.4 sub-GHz
DEFAULT_CHANNEL ?= 5
CFLAGS += -DIEEE802154_DEFAULT_SUBGHZ_CHANNEL=$(DEFAULT_CHANNEL)
else # radio is IEEE 802.15.4 2.4 GHz
DEFAULT_CHANNEL ?= 26
CFLAGS += -DIEEE802154_DEFAULT_CHANNEL=$(DEFAULT_CHANNEL)
endif
endif