periph_conf.h
4.52 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_fox
* @{
*
* @file
* @brief Peripheral MCU configuration for the fox board
*
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
*/
#ifndef PERIPH_CONF_H_
#define PERIPH_CONF_H_
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock system configuration
* @{
**/
#define CLOCK_HSE (16000000U) /* frequency of external oscillator */
#define CLOCK_CORECLOCK (72000000U) /* targeted core clock frequency */
/* configuration of PLL prescaler and multiply values */
/* CORECLOCK := CLOCK_SOURCE / PLL_DIV * PLL_MUL */
#define CLOCK_PLL_DIV (2)
#define CLOCK_PLL_MUL (9)
/* configuration of peripheral bus clock prescalers */
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1 /* AHB clock -> 72MHz */
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1 /* APB2 clock -> 72MHz */
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2 /* APB1 clock -> 36MHz */
/* resulting bus clocks */
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
#define CLOCK_APB2 (CLOCK_CORECLOCK)
/* configuration of flash access cycles */
#define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY_2
/** @} */
/**
* @name ADC configuration
* @{
*/
#define ADC_NUMOF (0)
/** @} */
/**
* @brief DAC configuration
* @{
*/
#define DAC_NUMOF (0)
/** @} */
/**
* @brief Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_1_ISR isr_tim3
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @brief UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rcc_pin = RCC_APB1ENR_USART2EN,
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.rcc_pin = RCC_APB2ENR_USART1EN,
.bus = APB2,
.irqn = USART1_IRQn
}
};
#define UART_0_ISR isr_usart2
#define UART_1_ISR isr_usart1
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @brief SPI configuration
* @{
*/
#define SPI_NUMOF (1U)
#define SPI_0_EN 1
/* SPI 0 device configuration */
#define SPI_0_DEV SPI2
#define SPI_0_CLKEN() (periph_clk_en(APB1, RCC_APB1ENR_SPI2EN))
#define SPI_0_CLKDIS() (periph_clk_dis(APB1, RCC_APB1ENR_SPI2EN))
#define SPI_0_BUS_DIV 0 /* 1 -> SPI runs with full CPU clock, 0 -> half CPU clock */
/* SPI 0 pin configuration */
#define SPI_0_CLK_PIN GPIO_PIN(PORT_B,13)
#define SPI_0_MOSI_PIN GPIO_PIN(PORT_B,15)
#define SPI_0_MISO_PIN GPIO_PIN(PORT_B,14)
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_IRQ_PRIO 1
#define RTT_DEV RTC
#define RTT_IRQ RTC_IRQn
#define RTT_ISR isr_rtc
#define RTT_MAX_VALUE (0xffffffff)
#define RTT_FREQUENCY (1) /* in Hz */
#define RTT_PRESCALER (0x7fff) /* run with 1 Hz */
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (1U)
#define I2C_0_EN 1
#define I2C_IRQ_PRIO 1
#define I2C_APBCLK (36000000U)
/* I2C 0 device configuration */
#define I2C_0_DEV I2C1
#define I2C_0_CLKEN() (periph_clk_en(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_CLKDIS() (periph_clk_dis(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_EVT_IRQ I2C1_EV_IRQn
#define I2C_0_EVT_ISR isr_i2c1_ev
#define I2C_0_ERR_IRQ I2C1_ER_IRQn
#define I2C_0_ERR_ISR isr_i2c1_er
/* I2C 0 pin configuration */
#define I2C_0_SCL_PIN GPIO_PIN(PORT_B,6)
#define I2C_0_SDA_PIN GPIO_PIN(PORT_B,7)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H_ */
/** @} */