w5100_regs.h
6.17 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
/*
* Copyright (C) 2016 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup drivers_w5100
* @{
*
* @file
* @brief Register definitions for W5100 devices
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef W5100_REGS_H
#define W5100_REGS_H
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief SPI commands
* @{
*/
#define CMD_READ (0x0f)
#define CMD_WRITE (0xf0)
/** @} */
/**
* @brief Common registers
*/
#define REG_MODE (0x0000) /**< mode */
#define REG_GAR0 (0x0001) /**< gateway address 0 */
#define REG_GAR1 (0x0002) /**< gateway address 1 */
#define REG_GAR2 (0x0003) /**< gateway address 2 */
#define REG_GAR3 (0x0004) /**< gateway address 3 */
#define REG_SUB0 (0x0005) /**< subnet mask 0 */
#define REG_SUB1 (0x0006) /**< subnet mask 1 */
#define REG_SUB2 (0x0007) /**< subnet mask 2 */
#define REG_SUB3 (0x0008) /**< subnet mask 3 */
#define REG_SHAR0 (0x0009) /**< source hardware address 0 */
#define REG_SHAR1 (0x000a) /**< source hardware address 1 */
#define REG_SHAR2 (0x000b) /**< source hardware address 2 */
#define REG_SHAR3 (0x000c) /**< source hardware address 3 */
#define REG_SHAR4 (0x000d) /**< source hardware address 4 */
#define REG_SHAR5 (0x000e) /**< source hardware address 5 */
#define REG_SIPR0 (0x000f) /**< source IP address 0 */
#define REG_SIPR1 (0x0010) /**< source IP address 1 */
#define REG_SIPR2 (0x0011) /**< source IP address 2 */
#define REG_SIPR3 (0x0012) /**< source IP address 3 */
#define REG_IR (0x0015) /**< interrupt flags */
#define REG_IMR (0x0016) /**< interrupt masks */
#define REG_RTR0 (0x0017) /**< retry time 0 */
#define REG_RTR1 (0x0018) /**< retry time 1 */
#define REG_RCR (0x0019) /**< retry count */
#define REG_RMSR (0x001a) /**< RX memory size */
#define REG_TMSR (0x001b) /**< TX memory size */
#define REG_PATR0 (0x001c) /**< PPPoE auth type 0 */
#define REG_PATR1 (0x001d) /**< PPPoE auth type 1 */
#define REG_PTIMER (0x0028) /**< PPP LCP request timer */
#define REG_PMAGIC (0x0029) /**< PPP LCP magic number */
#define REG_UIPR0 (0x002a) /**< unreachable IP address 0 */
#define REG_UIPR1 (0x002b) /**< unreachable IP address 1 */
#define REG_UIPR2 (0x002c) /**< unreachable IP address 2 */
#define REG_UIPR3 (0x002d) /**< unreachable IP address 3 */
#define REG_UPORT0 (0x00fe) /**< unreachable port 0 */
#define REG_UPORT1 (0x002f) /**< unreachable port 1 */
/** @} */
/**
* @brief Socket 0 registers
*
* As we are using the device in MACRAW mode, we only need socket 0.
*/
#define S0_MR (0x0400) /**< mode */
#define S0_CR (0x0401) /**< control */
#define S0_IR (0x0402) /**< interrupt flags */
#define S0_SR (0x0403) /**< state */
#define S0_DHAR0 (0x0406) /**< destination hardware address 0 */
#define S0_DHAR1 (0x0407) /**< destination hardware address 1 */
#define S0_DHAR2 (0x0408) /**< destination hardware address 2 */
#define S0_DHAR3 (0x0409) /**< destination hardware address 3 */
#define S0_DHAR4 (0x040a) /**< destination hardware address 4 */
#define S0_DHAR5 (0x040b) /**< destination hardware address 5 */
#define S0_DIPR0 (0x040c) /**< destination IP address 0 */
#define S0_DIPR1 (0x040d) /**< destination IP address 1 */
#define S0_DIPR2 (0x040e) /**< destination IP address 2 */
#define S0_DIPR3 (0x040f) /**< destination IP address 3 */
#define S0_DPORT0 (0x0410) /**< destination port 0 */
#define S0_DPORT1 (0x0411) /**< destination port 1 */
#define S0_MSSR0 (0x0412) /**< maximum segment size 0 */
#define S0_MSSR1 (0x0413) /**< maximum segment size 1 */
#define S0_PROTO (0x0414) /**< protocol in IP raw mode */
#define S0_TOS (0x0415) /**< IP TOS */
#define S0_TTL (0x0416) /**< IP TTL */
#define S0_TX_FSR0 (0x0420) /**< TX free size 0 */
#define S0_TX_FSR1 (0x0421) /**< TX free size 1 */
#define S0_TX_RD0 (0x0422) /**< TX read pointer 0 */
#define S0_TX_RD1 (0x0423) /**< TX read pointer 1 */
#define S0_TX_WR0 (0x0424) /**< TX write pointer 0 */
#define S0_TX_WR1 (0x0425) /**< TX write pointer 1 */
#define S0_RX_RSR0 (0x0426) /**< RX receive size 0 */
#define S0_RX_RSR1 (0x0427) /**< RX receive size 1 */
#define S0_RX_RD0 (0x0428) /**< RX read pointer 0 */
#define S0_RX_RD1 (0x0429) /**< RX read pointer 1 */
/** @} */
/**
* @brief Some selected bitfield definitions
*/
#define MODE_RESET (0x80) /**< device mode: reset */
#define RMSR_8KB_TO_S0 (0x03) /**< receive memory size: 8kib */
#define TMSR_8KB_TO_S0 (0x03) /**< transmit memory size: 8kib */
#define IMR_S0_INT (0x01) /**< global socket 0 interrupt mask */
#define MR_UDP (0x02) /**< socket mode: UDP */
#define MR_MACRAW (0x04) /**< socket mode: raw Ethernet */
#define CR_OPEN (0x01) /**< socket command: open */
#define CR_CLOSE (0x10) /**< socket command: close */
#define CR_SEND_MAC (0x21) /**< socket command: send raw */
#define CR_RECV (0x40) /**< socket command: receive new data */
#define IR_SEND_OK (0x10) /**< socket interrupt: send ok */
#define IR_RECV (0x04) /**< socket interrupt: data received */
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* W5100_REGS_H */
/** @} */