android_hce.ino
3.5 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
#include <SPI.h>
#include <PN532_SPI.h>
#include <PN532Interface.h>
#include <PN532.h>
PN532_SPI pn532spi(SPI, 10);
PN532 nfc(pn532spi);
void setup()
{
Serial.begin(115200);
Serial.println("-------Peer to Peer HCE--------");
nfc.begin();
uint32_t versiondata = nfc.getFirmwareVersion();
if (! versiondata) {
Serial.print("Didn't find PN53x board");
while (1); // halt
}
// Got ok data, print it out!
Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
// Set the max number of retry attempts to read from a card
// This prevents us from waiting forever for a card, which is
// the default behaviour of the PN532.
//nfc.setPassiveActivationRetries(0xFF);
// configure board to read RFID tags
nfc.SAMConfig();
}
void loop()
{
bool success;
uint8_t responseLength = 32;
Serial.println("Waiting for an ISO14443A card");
// set shield to inListPassiveTarget
success = nfc.inListPassiveTarget();
if(success) {
Serial.println("Found something!");
uint8_t selectApdu[] = { 0x00, /* CLA */
0xA4, /* INS */
0x04, /* P1 */
0x00, /* P2 */
0x07, /* Length of AID */
0xF0, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, /* AID defined on Android App */
0x00 /* Le */ };
uint8_t response[32];
success = nfc.inDataExchange(selectApdu, sizeof(selectApdu), response, &responseLength);
if(success) {
Serial.print("responseLength: "); Serial.println(responseLength);
nfc.PrintHexChar(response, responseLength);
do {
uint8_t apdu[] = "Hello from Arduino";
uint8_t back[32];
uint8_t length = 32;
success = nfc.inDataExchange(apdu, sizeof(apdu), back, &length);
if(success) {
Serial.print("responseLength: "); Serial.println(length);
nfc.PrintHexChar(back, length);
}
else {
Serial.println("Broken connection?");
}
}
while(success);
}
else {
Serial.println("Failed sending SELECT AID");
}
}
else {
Serial.println("Didn't find anything!");
}
delay(1000);
}
void printResponse(uint8_t *response, uint8_t responseLength) {
String respBuffer;
for (int i = 0; i < responseLength; i++) {
if (response[i] < 0x10)
respBuffer = respBuffer + "0"; //Adds leading zeros if hex value is smaller than 0x10
respBuffer = respBuffer + String(response[i], HEX) + " ";
}
Serial.print("response: "); Serial.println(respBuffer);
}
void setupNFC() {
nfc.begin();
uint32_t versiondata = nfc.getFirmwareVersion();
if (! versiondata) {
Serial.print("Didn't find PN53x board");
while (1); // halt
}
// Got ok data, print it out!
Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
// configure board to read RFID tags
nfc.SAMConfig();
}