robotis-loader.py
4.01 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
#!/usr/bin/env python
'''
MIT License
Copyright (c) 2014 Gregoire Passault
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
'''
# This script sends a program on a robotis board (OpenCM9.04 or CM900)
# using the robotis bootloader (used in OpenCM IDE)
#
# Usage:
# python robotis-loader.py <serial port> <binary>
#
# Example:
# python robotis-loader.py /dev/ttyACM0 firmware.bin
#
# https://github.com/Gregwar/robotis-loader
import serial
import sys
import os
import time
print('~~ Robotis loader ~~')
print('')
print('Please, make sure to connect the USB cable WHILE holding down the "USER SW" button.')
print('Status LED should stay lit and the board should be able to load the program.')
print('')
# Helper function for bytes conversion
if sys.version_info[:1][0] == 3:
def to_ord(val):
return ord(chr(val))
else:
def to_ord(val):
return ord(val)
# Reading command line
#if len(sys.argv) != 3:
# exit('! Usage: robotis-loader.py <serial-port> <binary>')
#pgm, port, binary = sys.argv
pgm = sys.argv[0]
port = os.environ["PORT"]
binary = os.environ["HEXFILE"]
def progressBar(percent, precision=65):
"""Prints a progress bar."""
threshold = precision*percent / 100.0
sys.stdout.write('[ ')
for x in range(precision):
if x < threshold:
sys.stdout.write('#')
else:
sys.stdout.write(' ')
sys.stdout.write(' ] ')
sys.stdout.flush()
# Opening the firmware file
try:
stat = os.stat(binary)
size = stat.st_size
firmware = open(binary, 'rb')
print('* Opening %s, size=%d' % (binary, size))
except:
exit('! Unable to open file %s' % binary)
# Opening serial port
try:
s = serial.Serial(port, baudrate=115200)
except:
exit('! Unable to open serial port %s' % port)
print('* Resetting the board')
s.setRTS(True)
s.setDTR(False)
time.sleep(0.1)
s.setRTS(False)
s.write(b'CM9X')
s.close()
time.sleep(1.0);
print('* Connecting...')
s = serial.Serial(port, baudrate=115200)
s.write(b'AT&LD')
print('* Download signal transmitted, waiting...')
# Entering bootloader sequence
while True:
line = s.readline().strip()
if line.endswith(b'Ready..'):
print('* Board ready, sending data')
cs = 0
pos = 0
while True:
c = firmware.read(2048)
if len(c):
pos += len(c)
sys.stdout.write("\r")
progressBar(100 * float(pos) / float(size))
s.write(c)
for k in range(0, len(c)):
cs = (cs + to_ord(c[k])) % 256
else:
firmware.close()
break
print('')
s.setDTR(True)
print('* Checksum: %d' % (cs))
import struct
s.write(struct.pack('B', cs))
# s.write('{0}'.format(chr(cs)).encode('ascii'))
print('* Firmware was sent')
else:
if line == b'Success..':
print('* Success, running the code')
print('')
s.write(b'AT&RST')
s.close()
exit()
else:
print('Board -> {}'.format(line))