periph_conf_common.h
4.81 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_iotlab-m3
* @{
*
* @file
* @brief Peripheral MCU configuration for the iotlab-m3 board
*
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef PERIPH_CONF_COMMON_H
#define PERIPH_CONF_COMMON_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock settings
*
* @note This is auto-generated from
* `cpu/stm32_common/dist/clk_conf/clk_conf.c`
* @{
*/
/* give the target core clock (HCLK) frequency [in Hz],
* maximum: 72MHz */
#define CLOCK_CORECLOCK (72000000U)
/* 0: no external high speed crystal available
* else: actual crystal frequency [in Hz] */
#define CLOCK_HSE (16000000U)
/* 0: no external low speed crystal available,
* 1: external crystal available (always 32.768kHz) */
#define CLOCK_LSE (1)
/* peripheral clock setup */
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2 /* max 36MHz */
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1 /* max 72MHz */
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
/* PLL factors */
#define CLOCK_PLL_PREDIV (2)
#define CLOCK_PLL_MUL (9)
/** @} */
/**
* @name ADC configuration
* @{
*/
#define ADC_CONFIG { \
{ GPIO_PIN(PORT_A,3), 0, 3 }, \
{ GPIO_UNDEF , 0, 16 }, \
{ GPIO_UNDEF , 0, 17 } }
#define ADC_NUMOF (3)
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_1_ISR isr_tim3
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.bus = APB2,
.irqn = USART1_IRQn
},
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.bus = APB1,
.irqn = USART2_IRQn
}
};
#define UART_0_ISR (isr_usart1)
#define UART_1_ISR (isr_usart2)
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_IRQ_PRIO 1
#define RTT_DEV RTC
#define RTT_IRQ RTC_IRQn
#define RTT_ISR isr_rtc
#define RTT_MAX_VALUE (0xffffffff)
#define RTT_FREQUENCY (1) /* in Hz */
#define RTT_PRESCALER (0x7fff) /* run with 1 Hz */
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (1U)
#define I2C_0_EN 1
#define I2C_IRQ_PRIO 1
#define I2C_APBCLK (CLOCK_APB1)
/* I2C 0 device configuration */
#define I2C_0_DEV I2C1
#define I2C_0_CLKEN() (periph_clk_en(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_CLKDIS() (periph_clk_dis(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_EVT_IRQ I2C1_EV_IRQn
#define I2C_0_EVT_ISR isr_i2c1_ev
#define I2C_0_ERR_IRQ I2C1_ER_IRQn
#define I2C_0_ERR_ISR isr_i2c1_er
/* I2C 0 pin configuration */
#define I2C_0_SCL_PIN GPIO_PIN(PORT_B,6)
#define I2C_0_SDA_PIN GPIO_PIN(PORT_B,7)
/** @} */
/**
* @brief Shared SPI clock div table
*
* @note The spi_divtable is auto-generated from
* `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
*/
static const uint8_t spi_divtable[2][5] = {
{ /* for APB1 @ 36000000Hz */
7, /* -> 140625Hz */
6, /* -> 281250Hz */
4, /* -> 1125000Hz */
2, /* -> 4500000Hz */
1 /* -> 9000000Hz */
},
{ /* for APB2 @ 72000000Hz */
7, /* -> 281250Hz */
7, /* -> 281250Hz */
5, /* -> 1125000Hz */
3, /* -> 4500000Hz */
2 /* -> 9000000Hz */
}
};
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_COMMON_H */
/** @} */