periph_conf.h
3.05 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
/*
* Copyright (C) 2016-2017 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_calliope-mini
* @{
*
* @file
* @brief Peripheral configuration for the Calliope mini
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
* @author Semjon Kerner <semjon.kerner@fu-berlin.de>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock configuration
*
* @note The radio will not work with the internal RC oscillator!
*
* @{
*/
#define CLOCK_HFCLK (16U) /* set to 0: internal RC oscillator
16: 16MHz crystal
32: 32MHz crystal */
#define CLOCK_LFCLK (0) /* set to 0: internal RC oscillator
* 1: 32.768 kHz crystal
* 2: derived from HFCLK */
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = NRF_TIMER0,
.channels = 3,
.bitmode = TIMER_BITMODE_BITMODE_24Bit,
.irqn = TIMER0_IRQn
},
{
.dev = NRF_TIMER1,
.channels = 3,
.bitmode = TIMER_BITMODE_BITMODE_16Bit,
.irqn = TIMER1_IRQn
},
{
.dev = NRF_TIMER2,
.channels = 3,
.bitmode = TIMER_BITMODE_BITMODE_16Bit,
.irqn = TIMER2_IRQn
}
};
#define TIMER_0_ISR isr_timer0
#define TIMER_1_ISR isr_timer1
#define TIMER_2_ISR isr_timer2
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_DEV (1) /* NRF_RTC1 */
#define RTT_MAX_VALUE (0x00ffffff)
#define RTT_FREQUENCY (1024)
/** @} */
/**
* @name UART configuration
* @{
*/
#define UART_NUMOF (1U)
/* UART pin configuration */
#define UART_HWFLOWCTRL 0
#define UART_PIN_RX 25
#define UART_PIN_TX 24
/** @} */
/**
* @name I2C (TWI) configuration
* @{
*/
static const i2c_conf_t i2c_config[] = {
{
.dev = NRF_TWI0,
.pin_scl = 19,
.pin_sda = 20,
.ppi = 0
}
};
#define I2C_NUMOF (sizeof(i2c_config) / sizeof(i2c_config[0]))
/** @} */
/**
* @name ADC configuration
*
* The configuration consists simply of a list of channels that should be used
* @{
*/
#define ADC_NUMOF (0)
/** @} */
/**
* @name Radio device configuration
*
* The radio is not guarded by a NUMOF define, as the radio is selected by its
* own module in the build system.
* @{
*/
#define RADIO_IRQ_PRIO 1
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */