periph_conf.h
7.04 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
/*
* Copyright (C) 2016 Inria
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_nucleo-f411
* @{
*
* @file
* @name Peripheral MCU configuration for the nucleo-f411 board
*
* @author Alexandre Abadie <alexandre.abadie@inria.fr>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock settings
*
* @note This is auto-generated from
* `cpu/stm32_common/dist/clk_conf/clk_conf.c`
* @{
*/
/* give the target core clock (HCLK) frequency [in Hz],
* maximum: 100MHz */
#define CLOCK_CORECLOCK (96000000U)
/* 0: no external high speed crystal available
* else: actual crystal frequency [in Hz] */
#define CLOCK_HSE (8000000U)
/* 0: no external low speed crystal available,
* 1: external crystal available (always 32.768kHz) */
#define CLOCK_LSE (1)
/* peripheral clock setup */
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2 /* max 50MHz */
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1 /* max 100MHz */
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
/* Main PLL factors */
#define CLOCK_PLL_M (4)
#define CLOCK_PLL_N (192)
#define CLOCK_PLL_P (4)
#define CLOCK_PLL_Q (8)
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM5,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM5EN,
.bus = APB1,
.irqn = TIM5_IRQn
}
};
#define TIMER_0_ISR isr_tim5
#define TIMER_1_ISR isr_tim4
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A,3),
.tx_pin = GPIO_PIN(PORT_A,2),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART2_IRQn,
#ifdef UART_USE_DMA
.dma_stream = 6,
.dma_chan = 4
#endif
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB2,
.irqn = USART1_IRQn,
#ifdef UART_USE_DMA
.dma_stream = 6,
.dma_chan = 3
#endif
},
{
.dev = USART6,
.rcc_mask = RCC_APB2ENR_USART6EN,
.rx_pin = GPIO_PIN(PORT_A, 12),
.tx_pin = GPIO_PIN(PORT_A, 11),
.rx_af = GPIO_AF8,
.tx_af = GPIO_AF8,
.bus = APB2,
.irqn = USART6_IRQn,
#ifdef UART_USE_DMA
.dma_stream = 6,
.dma_chan = 2
#endif
}
};
/* assign ISR vector names */
#define UART_0_ISR isr_usart2
#define UART_0_DMA_ISR isr_dma1_stream6
#define UART_1_ISR isr_usart1
#define UART_1_DMA_ISR isr_dma1_stream6
#define UART_2_ISR isr_usart6
#define UART_2_DMA_ISR isr_dma1_stream6
/* deduct number of defined UART interfaces */
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/** @name PWM configuration
* @{
*/
static const pwm_conf_t pwm_config[] = {
{
.dev = TIM2,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.chan = { { .pin = GPIO_PIN(PORT_A, 15) , .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_B, 3) /* D3 */, .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_B, 10) /* D6 */, .cc_chan = 2 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF1,
.bus = APB1
},
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = { { .pin = GPIO_PIN(PORT_B, 4) /* D5 */, .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_C, 7) /* D9 */, .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2 },
{ .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3 } },
.af = GPIO_AF2,
.bus = APB1
},
};
#define PWM_NUMOF (sizeof(pwm_config) / sizeof(pwm_config[0]))
/** @} */
/**
* @name SPI configuration
*
* @note The spi_divtable is auto-generated from
* `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
* @{
*/
static const uint8_t spi_divtable[2][5] = {
{ /* for APB1 @ 48000000Hz */
7, /* -> 187500Hz */
6, /* -> 375000Hz */
5, /* -> 750000Hz */
2, /* -> 6000000Hz */
1 /* -> 12000000Hz */
},
{ /* for APB2 @ 96000000Hz */
7, /* -> 375000Hz */
7, /* -> 375000Hz */
6, /* -> 750000Hz */
3, /* -> 6000000Hz */
2 /* -> 12000000Hz */
}
};
static const spi_conf_t spi_config[] = {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_PIN(PORT_A, 4),
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (1U)
#define I2C_0_EN 1
#define I2C_IRQ_PRIO 1
#define I2C_APBCLK (CLOCK_APB1)
/* I2C 0 device configuration */
#define I2C_0_DEV I2C1
#define I2C_0_CLKEN() (RCC->APB1ENR |= RCC_APB1ENR_I2C1EN)
#define I2C_0_CLKDIS() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
#define I2C_0_EVT_IRQ I2C1_EV_IRQn
#define I2C_0_EVT_ISR isr_i2c1_ev
#define I2C_0_ERR_IRQ I2C1_ER_IRQn
#define I2C_0_ERR_ISR isr_i2c1_er
/* I2C 0 pin configuration */
#define I2C_0_SCL_PORT GPIOB
#define I2C_0_SCL_PIN 8
#define I2C_0_SCL_AF 4
#define I2C_0_SCL_CLKEN() (RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN)
#define I2C_0_SDA_PORT GPIOB
#define I2C_0_SDA_PIN 9
#define I2C_0_SDA_AF 4
#define I2C_0_SDA_CLKEN() (RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN)
/** @} */
/**
* @name ADC configuration
*
* Note that we do not configure all ADC channels,
* and not in the STM32F411 order. Instead, we
* just define 6 ADC channels, for the Nucleo
* Arduino header pins A0-A5
*
* @{
*/
#define ADC_NUMOF (6U)
#define ADC_CONFIG { \
{GPIO_PIN(PORT_A, 0), 0, 0}, \
{GPIO_PIN(PORT_A, 1), 0, 1}, \
{GPIO_PIN(PORT_A, 4), 0, 4}, \
{GPIO_PIN(PORT_B, 0), 0, 8}, \
{GPIO_PIN(PORT_C, 1), 0, 11}, \
{GPIO_PIN(PORT_C, 0), 0, 10}, \
}
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */