encx24j600.c
10.5 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
/*
* Copyright (C) 2015 Ell-i open source co-operative
* Kaspar Schleiser <kaspar@schleiser.de>
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup drivers_encx24j600
* @{
*
* @file
* @brief Internal functions for the ENCX24J600 driver
*
* @author Kaspar Schleiser <kaspar@schleiser.de>
*
* @}
*/
#include <assert.h>
#include <errno.h>
#include "mutex.h"
#include "encx24j600.h"
#include "encx24j600_internal.h"
#include "encx24j600_defines.h"
#include "xtimer.h"
#include "net/netdev.h"
#include "net/netdev/eth.h"
#include "net/eui64.h"
#include "net/ethernet.h"
#ifdef MODULE_NETSTATS_L2
#include <string.h>
#include "net/netstats.h"
#endif
#define ENABLE_DEBUG (0)
#include "debug.h"
#define SPI_CLK SPI_CLK_1MHZ
#define SPI_MODE SPI_MODE_0
#define ENCX24J600_INIT_DELAY (100000U)
#define ENC_BUFFER_START (0x0000)
#define ENC_BUFFER_SIZE (0x6000)
#define ENC_BUFFER_END (0x5FFF)
#define RX_BUFFER_START (0x5340) /* Default value */
#define RX_BUFFER_END (ENC_BUFFER_END)
#define TX_BUFFER_LEN (0x2000)
#define TX_BUFFER_END (RX_BUFFER_START)
#define TX_BUFFER_START (TX_BUFFER_END - TX_BUFFER_LEN)
static void cmd(encx24j600_t *dev, char cmd);
static void reg_set(encx24j600_t *dev, uint8_t reg, uint16_t value);
static uint16_t reg_get(encx24j600_t *dev, uint8_t reg);
static void reg_clear_bits(encx24j600_t *dev, uint8_t reg, uint16_t mask);
static inline int _packets_available(encx24j600_t *dev);
static void _get_mac_addr(netdev_t *dev, uint8_t* buf);
/* netdev interface */
static int _send(netdev_t *netdev, const struct iovec *vector, unsigned count);
static int _recv(netdev_t *netdev, void *buf, size_t len, void *info);
static int _init(netdev_t *dev);
static void _isr(netdev_t *dev);
static int _get(netdev_t *dev, netopt_t opt, void *value, size_t max_len);
const static netdev_driver_t netdev_driver_encx24j600 = {
.send = _send,
.recv = _recv,
.init = _init,
.isr = _isr,
.get = _get,
.set = netdev_eth_set,
};
static inline void lock(encx24j600_t *dev) {
spi_acquire(dev->spi, dev->cs, SPI_MODE, SPI_CLK);
}
static inline void unlock(encx24j600_t *dev) {
spi_release(dev->spi);
}
void encx24j600_setup(encx24j600_t *dev, const encx24j600_params_t *params)
{
dev->netdev.driver = &netdev_driver_encx24j600;
dev->spi = params->spi;
dev->cs = params->cs_pin;
dev->int_pin = params->int_pin;
dev->rx_next_ptr = RX_BUFFER_START;
}
static void encx24j600_isr(void *arg)
{
encx24j600_t *dev = (encx24j600_t *) arg;
/* disable interrupt line */
gpio_irq_disable(dev->int_pin);
/* call netdev hook */
dev->netdev.event_callback((netdev_t*) dev, NETDEV_EVENT_ISR);
}
static void _isr(netdev_t *netdev)
{
encx24j600_t *dev = (encx24j600_t *) netdev;
uint16_t eir;
lock(dev);
cmd(dev, ENC_CLREIE);
eir = reg_get(dev, ENC_EIR);
/* check & handle link state change */
if (eir & ENC_LINKIF) {
uint16_t estat = reg_get(dev, ENC_ESTAT);
netdev_event_t event = (estat & ENC_PHYLNK) ?
NETDEV_EVENT_LINK_DOWN :
NETDEV_EVENT_LINK_UP;
netdev->event_callback(netdev, event);
}
/* check & handle available packets */
if (eir & ENC_PKTIF) {
while (_packets_available(dev)) {
unlock(dev);
netdev->event_callback(netdev, NETDEV_EVENT_RX_COMPLETE);
lock(dev);
}
}
/* drop all flags */
reg_clear_bits(dev, ENC_EIR, ENC_LINKIF);
/* re-enable interrupt */
gpio_irq_enable(dev->int_pin);
cmd(dev, ENC_SETEIE);
unlock(dev);
}
static inline void enc_spi_transfer(encx24j600_t *dev, char *out, char *in, int len)
{
spi_transfer_bytes(dev->spi, dev->cs, false, out, in, len);
}
static inline uint16_t reg_get(encx24j600_t *dev, uint8_t reg)
{
char cmd[4] = { ENC_RCRU, reg, 0, 0 };
char result[4];
enc_spi_transfer(dev, cmd, result, 4);
return result[2] | (result[3] << 8);
}
static void phy_reg_set(encx24j600_t *dev, uint8_t reg, uint16_t value) {
reg_set(dev, ENC_MIREGADR, reg | (1<<8));
reg_set(dev, ENC_MIWR, value);
}
static void cmd(encx24j600_t *dev, char cmd) {
spi_transfer_byte(dev->spi, dev->cs, false, (uint8_t)cmd);
}
static void cmdn(encx24j600_t *dev, uint8_t cmd, char *out, char *in, int len) {
spi_transfer_byte(dev->spi, dev->cs, true, cmd);
spi_transfer_bytes(dev->spi, dev->cs, false, out, in, len);
}
static void reg_set(encx24j600_t *dev, uint8_t reg, uint16_t value)
{
char cmd[4] = { ENC_WCRU, reg, value, value >> 8 };
enc_spi_transfer(dev, cmd, NULL, 4);
}
static void reg_set_bits(encx24j600_t *dev, uint8_t reg, uint16_t mask)
{
char cmd[4] = { ENC_BFSU, reg, mask, mask >> 8 };
enc_spi_transfer(dev, cmd, NULL, 4);
}
static void reg_clear_bits(encx24j600_t *dev, uint8_t reg, uint16_t mask)
{
char cmd[4] = { ENC_BFCU, reg, mask, mask >> 8 };
enc_spi_transfer(dev, cmd, NULL, 4);
}
/*
* @brief Read/Write to encx24j600's SRAM
*
* @param[in] dev ptr to encx24j600 device handle
* @param[in] cmd either ENC_WGPDATA, ENC_RGPDATA, ENC_WRXDATA, ENC_RRXDATA, ENC_WUDADATA, ENC_RUDADATA
* @param[in] addr SRAM address to start reading. 0xFFFF means continue from old address
* @param ptr pointer to buffer to read from / write to
* @param[in] len nr of bytes to read/write
*/
static void sram_op(encx24j600_t *dev, uint16_t cmd, uint16_t addr, char *ptr, int len)
{
uint16_t reg;
char* in = NULL;
char* out = NULL;
/* determine pointer addr
*
* all SRAM access commands have an
* offset 0x5e to their pointer registers
* */
reg = cmd + 0x5e;
/* read or write? bit 1 tells us */
if (reg & 0x2) {
out = ptr;
} else {
in = ptr;
}
/* set pointer */
if (addr != 0xFFFF) {
reg_set(dev, reg, addr);
}
/* copy data */
cmdn(dev, cmd, in, out, len);
}
static int _init(netdev_t *encdev)
{
encx24j600_t *dev = (encx24j600_t *) encdev;
DEBUG("encx24j600: starting initialization...\n");
/* setup IO */
if (spi_init_cs(dev->spi, dev->cs) != SPI_OK) {
return -1;
}
gpio_init_int(dev->int_pin, GPIO_IN_PU, GPIO_FALLING, encx24j600_isr, (void*)dev);
lock(dev);
/* initialization procedure as described in data sheet (39935c.pdf) */
do {
do {
xtimer_usleep(ENCX24J600_INIT_DELAY);
reg_set(dev, ENC_EUDAST, 0x1234);
xtimer_usleep(ENCX24J600_INIT_DELAY);
} while (reg_get(dev, ENC_EUDAST) != 0x1234);
while (!(reg_get(dev, ENC_ESTAT) & ENC_CLKRDY)) {}
/* issue System Reset */
cmd(dev, ENC_SETETHRST);
/* make sure initialization finalizes */
xtimer_usleep(1000);
} while (!(reg_get(dev, ENC_EUDAST) == 0x0000));
/* configure flow control */
phy_reg_set(dev, ENC_PHANA, 0x05E1);
reg_set_bits(dev, ENC_ECON2, ENC_AUTOFC);
/* setup receive buffer */
reg_set(dev, ENC_ERXST, RX_BUFFER_START);
reg_set(dev, ENC_ERXTAIL, RX_BUFFER_END);
dev->rx_next_ptr = RX_BUFFER_START;
/* configure receive filter to receive multicast frames */
reg_set_bits(dev, ENC_ERXFCON, ENC_MCEN);
/* setup interrupts */
reg_set_bits(dev, ENC_EIE, ENC_PKTIE | ENC_LINKIE);
cmd(dev, ENC_ENABLERX);
cmd(dev, ENC_SETEIE);
DEBUG("encx24j600: initialization complete.\n");
unlock(dev);
#ifdef MODULE_NETSTATS_L2
memset(&encdev->stats, 0, sizeof(netstats_t));
#endif
return 0;
}
static int _send(netdev_t *netdev, const struct iovec *vector, unsigned count) {
encx24j600_t * dev = (encx24j600_t *) netdev;
lock(dev);
/* wait until previous packet has been sent */
while ((reg_get(dev, ENC_ECON1) & ENC_TXRTS)) {}
/* copy packet to SRAM */
size_t len = 0;
for (int i = 0; i < count; i++) {
sram_op(dev, ENC_WGPDATA, (i ? 0xFFFF : TX_BUFFER_START), vector[i].iov_base, vector[i].iov_len);
len += vector[i].iov_len;
}
/* set start of TX packet and length */
reg_set(dev, ENC_ETXST, TX_BUFFER_START);
reg_set(dev, ENC_ETXLEN, len);
/* initiate sending */
cmd(dev, ENC_SETTXRTS);
/* wait for sending to complete */
/* (not sure if it is needed, keeping the line uncommented) */
/*while ((reg_get(dev, ENC_ECON1) & ENC_TXRTS)) {}*/
#ifdef MODULE_NETSTATS_L2
netdev->stats.tx_bytes += len;
#endif
unlock(dev);
return len;
}
static inline int _packets_available(encx24j600_t *dev)
{
/* return ENC_PKTCNT (low byte of ENC_ESTAT) */
return reg_get(dev, ENC_ESTAT) & ~0xFF00;
}
static void _get_mac_addr(netdev_t *encdev, uint8_t* buf)
{
encx24j600_t * dev = (encx24j600_t *) encdev;
uint16_t *addr = (uint16_t *) buf;
lock(dev);
addr[0] = reg_get(dev, ENC_MAADR1);
addr[1] = reg_get(dev, ENC_MAADR2);
addr[2] = reg_get(dev, ENC_MAADR3);
unlock(dev);
}
static int _recv(netdev_t *netdev, void *buf, size_t len, void *info)
{
encx24j600_t * dev = (encx24j600_t *) netdev;
encx24j600_frame_hdr_t hdr;
(void)info;
lock(dev);
/* read frame header */
sram_op(dev, ENC_RRXDATA, dev->rx_next_ptr, (char*)&hdr, sizeof(hdr));
/* hdr.frame_len given by device contains 4 bytes checksum */
size_t payload_len = hdr.frame_len - 4;
if (buf) {
if (payload_len > len) {
/* payload exceeds buffer size */
unlock(dev);
return -ENOBUFS;
}
#ifdef MODULE_NETSTATS_L2
netdev->stats.rx_count++;
netdev->stats.rx_bytes += payload_len;
#endif
/* read packet (without 4 bytes checksum) */
sram_op(dev, ENC_RRXDATA, 0xFFFF, buf, payload_len);
/* decrement available packet count */
cmd(dev, ENC_SETPKTDEC);
dev->rx_next_ptr = hdr.rx_next_ptr;
reg_set(dev, ENC_ERXTAIL, dev->rx_next_ptr - 2);
}
unlock(dev);
return payload_len;
}
static int _get(netdev_t *dev, netopt_t opt, void *value, size_t max_len)
{
int res = 0;
switch (opt) {
case NETOPT_ADDRESS:
if (max_len < ETHERNET_ADDR_LEN) {
res = -EINVAL;
}
else {
_get_mac_addr(dev, (uint8_t*)value);
res = ETHERNET_ADDR_LEN;
}
break;
default:
res = netdev_eth_get(dev, opt, value, max_len);
break;
}
return res;
}