periph_conf.h
2.77 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_pca10005
* @{
*
* @file
* @brief Peripheral MCU configuration for the nRF51822 board pca10005
*
* @author Christian Kühling <kuehling@zedat.fu-berlin.de>
* @author Timo Ziegler <timo.ziegler@fu-berlin.de>
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock configuration
*
* @note The radio will not work with the internal RC oscillator!
*
* @{
*/
#define CLOCK_HFCLK (16U) /* set to 0: internal RC oscillator
16: 16MHz crystal
32: 32MHz crystal */
#define CLOCK_LFCLK (0) /* set to 0: internal RC oscillator
* 1: 32.768 kHz crystal
* 2: derived from HFCLK */
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
/* dev, channels, width */
{ NRF_TIMER0, 3, TIMER_BITMODE_BITMODE_24Bit, TIMER0_IRQn }
};
#define TIMER_0_ISR isr_timer0
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
#define UART_NUMOF (1U)
/* UART pin configuration */
#define UART_PIN_RX 11
#define UART_PIN_TX 9
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTT_DEV (1) /* NRF_RTC1 */
#define RTT_MAX_VALUE (0x00ffffff)
#define RTT_FREQUENCY (1024)
/** @} */
/**
* @name SPI configuration
* @{
*/
static const spi_conf_t spi_config[] = {
{
.dev = NRF_SPI0,
.sclk = 19,
.mosi = 17,
.miso = 18
},
{
.dev = NRF_SPI1,
.sclk = 22,
.mosi = 20,
.miso = 21
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
/**
* @name ADC configuration
*
* The configuration consists simply of a list of channels that should be used
* @{
*/
#define ADC_CONFIG {0, 1, 2, 3}
#define ADC_NUMOF (4)
/** @} */
/**
* @name Radio device configuration
*
* The radio is not guarded by a NUMOF define, as the radio is selected by its
* own module in the build system.
* @{
*/
#define RADIO_IRQ_PRIO 1
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */