periph_conf.h
8.42 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
/*
* Copyright (C) 2017 Eistec AB
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_frdm-k22f
* @{
*
* @file
* @name Peripheral MCU configuration for the FRDM-K22F
*
* @author Joakim Nohlgård <joakim.nohlgard@eistec.se>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C"
{
#endif
/**
* @name Clock system configuration
* @{
*/
static const clock_config_t clock_config = {
/*
* This configuration results in the system running from the FLL output with
* the following clock frequencies:
* Core: 60 MHz
* Bus: 30 MHz
* Flex: 20 MHz
* Flash: 20 MHz
*/
.clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(1) |
SIM_CLKDIV1_OUTDIV3(2) | SIM_CLKDIV1_OUTDIV4(2),
.default_mode = KINETIS_MCG_MODE_FEE,
/* The crystal connected to OSC0 is 8 MHz */
.erc_range = KINETIS_MCG_ERC_RANGE_HIGH,
.fcrdiv = 0, /* Fast IRC divide by 1 => 4 MHz */
.oscsel = 0, /* Use OSC0 for external clock */
.clc = 0, /* External load caps on the FRDM-K22F board */
.fll_frdiv = 0b011, /* Divide by 256 */
.fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1464, /* FLL freq = 48 MHz */
.fll_factor_fee = KINETIS_MCG_FLL_FACTOR_1920, /* FLL freq = 60 MHz */
.pll_prdiv = 0b00011, /* Divide by 4 */
.pll_vdiv = 0b00110, /* Multiply by 30 => PLL freq = 60 MHz */
.enable_oscillator = true,
.select_fast_irc = true,
.enable_mcgirclk = false,
};
#define CLOCK_CORECLOCK (60000000ul)
#define CLOCK_BUSCLOCK (CLOCK_CORECLOCK / 2)
/** @} */
/**
* @name Timer configuration
* @{
*/
#define PIT_NUMOF (2U)
#define PIT_CONFIG { \
{ \
.prescaler_ch = 0, \
.count_ch = 1, \
}, \
{ \
.prescaler_ch = 2, \
.count_ch = 3, \
}, \
}
#define LPTMR_NUMOF (1U)
#define LPTMR_CONFIG { \
{ \
.dev = LPTMR0, \
.irqn = LPTMR0_IRQn, \
} \
}
#define TIMER_NUMOF ((PIT_NUMOF) + (LPTMR_NUMOF))
#define PIT_BASECLOCK (CLOCK_BUSCLOCK)
#define PIT_ISR_0 isr_pit1
#define PIT_ISR_1 isr_pit3
#define LPTMR_ISR_0 isr_lptmr0
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = UART1,
.freq = CLOCK_CORECLOCK,
.pin_rx = GPIO_PIN(PORT_E, 1),
.pin_tx = GPIO_PIN(PORT_E, 0),
.pcr_rx = PORT_PCR_MUX(3),
.pcr_tx = PORT_PCR_MUX(3),
.irqn = UART1_RX_TX_IRQn,
.scgc_addr = &SIM->SCGC4,
.scgc_bit = SIM_SCGC4_UART1_SHIFT,
.mode = UART_MODE_8N1,
},
};
#define UART_0_ISR (isr_uart1_rx_tx)
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @name ADC configuration
* @{
*/
static const adc_conf_t adc_config[] = {
/* dev, pin, channel */
{ .dev = ADC0, .pin = GPIO_UNDEF , .chan = 0 }, /* ADC0_DP0 */
{ .dev = ADC0, .pin = GPIO_UNDEF , .chan = 19 }, /* ADC0_DM0 */
{ .dev = ADC1, .pin = GPIO_UNDEF , .chan = 0 }, /* ADC1_DP0 */
{ .dev = ADC1, .pin = GPIO_UNDEF , .chan = 19 }, /* ADC1_DM0 */
{ .dev = ADC0, .pin = GPIO_PIN(PORT_B, 0), .chan = 8 }, /* PTB0 (Arduino A0) */
{ .dev = ADC0, .pin = GPIO_PIN(PORT_B, 1), .chan = 9 }, /* PTB1 (Arduino A1) */
{ .dev = ADC0, .pin = GPIO_PIN(PORT_C, 1), .chan = 15 }, /* PTC1 (Arduino A2) */
{ .dev = ADC0, .pin = GPIO_PIN(PORT_C, 2), .chan = 4 }, /* PTC2 (Arduino A3) */
};
#define ADC_NUMOF (sizeof(adc_config) / sizeof(adc_config[0]))
/** @} */
/**
* @name PWM configuration
* @{
*/
static const pwm_conf_t pwm_config[] = {
{
.ftm = FTM0,
.chan = {
{ .pin = GPIO_PIN(PORT_A, 1), .af = 3, .ftm_chan = 6 },
{ .pin = GPIO_PIN(PORT_A, 2), .af = 3, .ftm_chan = 7 },
{ .pin = GPIO_PIN(PORT_D, 5), .af = 4, .ftm_chan = 5 },
},
.chan_numof = 3,
.ftm_num = 0
}
};
#define PWM_NUMOF (sizeof(pwm_config) / sizeof(pwm_config[0]))
/** @} */
/**
* @name SPI configuration
*
* Clock configuration values based on the configured 48Mhz module clock.
*
* Auto-generated by:
* cpu/kinetis_common/dist/calc_spi_scalers/calc_spi_scalers.c
*
* @{
*/
static const uint32_t spi_clk_config[] = {
(
SPI_CTAR_PBR(0) | SPI_CTAR_BR(8) | /* -> 93750Hz */
SPI_CTAR_PCSSCK(0) | SPI_CTAR_CSSCK(8) |
SPI_CTAR_PASC(0) | SPI_CTAR_ASC(8) |
SPI_CTAR_PDT(0) | SPI_CTAR_DT(8)
),
(
SPI_CTAR_PBR(0) | SPI_CTAR_BR(6) | /* -> 375000Hz */
SPI_CTAR_PCSSCK(0) | SPI_CTAR_CSSCK(6) |
SPI_CTAR_PASC(0) | SPI_CTAR_ASC(6) |
SPI_CTAR_PDT(0) | SPI_CTAR_DT(6)
),
(
SPI_CTAR_PBR(1) | SPI_CTAR_BR(4) | /* -> 1000000Hz */
SPI_CTAR_PCSSCK(1) | SPI_CTAR_CSSCK(3) |
SPI_CTAR_PASC(1) | SPI_CTAR_ASC(3) |
SPI_CTAR_PDT(1) | SPI_CTAR_DT(3)
),
(
SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | /* -> 4800000Hz */
SPI_CTAR_PCSSCK(2) | SPI_CTAR_CSSCK(0) |
SPI_CTAR_PASC(2) | SPI_CTAR_ASC(0) |
SPI_CTAR_PDT(2) | SPI_CTAR_DT(0)
),
(
SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | /* -> 8000000Hz */
SPI_CTAR_PCSSCK(1) | SPI_CTAR_CSSCK(0) |
SPI_CTAR_PASC(1) | SPI_CTAR_ASC(0) |
SPI_CTAR_PDT(1) | SPI_CTAR_DT(0)
)
};
static const spi_conf_t spi_config[] = {
{
.dev = SPI0,
.pin_miso = GPIO_PIN(PORT_D, 3),
.pin_mosi = GPIO_PIN(PORT_D, 2),
.pin_clk = GPIO_PIN(PORT_D, 1),
.pin_cs = {
GPIO_PIN(PORT_C, 4),
GPIO_PIN(PORT_D, 4),
GPIO_UNDEF,
GPIO_UNDEF,
GPIO_UNDEF
},
.pcr = GPIO_AF_2,
.simmask = SIM_SCGC6_SPI0_MASK
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (1U)
#define I2C_0_EN 1
/* Low (10 kHz): MUL = 2, SCL divider = 1536, total: 3072 */
#define KINETIS_I2C_F_ICR_LOW (0x36)
#define KINETIS_I2C_F_MULT_LOW (1)
/* Normal (100 kHz): MUL = 2, SCL divider = 160, total: 320 */
#define KINETIS_I2C_F_ICR_NORMAL (0x1D)
#define KINETIS_I2C_F_MULT_NORMAL (1)
/* Fast (400 kHz): MUL = 1, SCL divider = 80, total: 80 */
#define KINETIS_I2C_F_ICR_FAST (0x14)
#define KINETIS_I2C_F_MULT_FAST (0)
/* Fast plus (1000 kHz): MUL = 1, SCL divider = 30, total: 30 */
#define KINETIS_I2C_F_ICR_FAST_PLUS (0x05)
#define KINETIS_I2C_F_MULT_FAST_PLUS (0)
/* I2C 0 device configuration */
#define I2C_0_DEV I2C0
#define I2C_0_CLKEN() (SIM->SCGC4 |= (SIM_SCGC4_I2C0_MASK))
#define I2C_0_CLKDIS() (SIM->SCGC4 &= ~(SIM_SCGC4_I2C0_MASK))
#define I2C_0_IRQ I2C0_IRQn
#define I2C_0_IRQ_HANDLER isr_i2c0
/* I2C 0 pin configuration */
#define I2C_0_PORT PORTB
#define I2C_0_PORT_CLKEN() (SIM->SCGC5 |= (SIM_SCGC5_PORTB_MASK))
#define I2C_0_PIN_AF 2
#define I2C_0_SDA_PIN 3
#define I2C_0_SCL_PIN 2
#define I2C_0_PORT_CFG (PORT_PCR_MUX(I2C_0_PIN_AF) | PORT_PCR_ODE_MASK)
/** @} */
/**
* @name RTT and RTC configuration
* @{
*/
#define RTT_NUMOF (1U)
#define RTC_NUMOF (1U)
#define RTT_DEV RTC
#define RTT_IRQ RTC_IRQn
#define RTT_IRQ_PRIO 10
#define RTT_UNLOCK() (SIM->SCGC6 |= (SIM_SCGC6_RTC_MASK))
#define RTT_ISR isr_rtc
#define RTT_FREQUENCY (1)
#define RTT_MAX_VALUE (0xffffffff)
/** @} */
/**
* @name Random Number Generator configuration
* @{
*/
#define KINETIS_RNGA RNG
#define HWRNG_CLKEN() (SIM->SCGC6 |= (1 << 9))
#define HWRNG_CLKDIS() (SIM->SCGC6 &= ~(1 << 9))
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */