periph_conf.h
3.54 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
/*
* Copyright (C) 2017 INRIA
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_opencm904
* @{
*
* @file
* @brief Peripheral MCU configuration for the opencm904 board
*
* @author Loïc Dauphin <loic.dauphin@inria.fr>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock system configuration
* @{
**/
/* high speed clock configuration:
* 0 := use internal HSI oscillator (always 8MHz)
* HSE frequency value := use external HSE oscillator with given freq [in Hz]
* must be 4000000 <= value <= 16000000 */
#define CLOCK_HSE (8000000U)
/* low speed clock configuration:
* 0 := use internal LSI oscillator (~40kHz)
* 1 := use extern LSE oscillator, always 32.768kHz */
#define CLOCK_LSE (0)
/* targeted system clock speed [in Hz], must be <= 72MHz */
#define CLOCK_CORECLOCK (72000000U)
/* PLL configuration, set both values to zero to disable PLL usage. The values
* must be set to satisfy the following equation:
* CORECLOCK := CLOCK_SOURCE / PLL_DIV * PLL_MUL
* with
* 1 <= CLOCK_PLL_DIV <= 2
* 2 <= CLOCK_PLL_MUL <= 17 */
#define CLOCK_PLL_DIV (1)
#define CLOCK_PLL_MUL (9)
/* AHB and APBx bus clock configuration, keep in mind the following constraints:
* ABP1 <= 36MHz
*/
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2
#define CLOCK_APB1 (CLOCK_CORECLOCK / 2)
/** @} */
/**
* @name ADC configuration
* @{
*/
#define ADC_NUMOF (0)
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_1_ISR isr_tim3
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_B, 7),
.tx_pin = GPIO_PIN(PORT_B, 6),
.bus = APB2,
.irqn = USART1_IRQn
},
{
.dev = USART3,
.rcc_mask = RCC_APB1ENR_USART3EN,
.rx_pin = GPIO_PIN(PORT_B, 11),
.tx_pin = GPIO_PIN(PORT_B, 10),
.bus = APB1,
.irqn = USART3_IRQn
}
};
#define UART_0_ISR isr_usart2
#define UART_1_ISR isr_usart1
#define UART_2_ISR isr_usart3
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @name I2C configuration
* @{
*/
#define I2C_NUMOF (0)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */