periph_conf.h
1.73 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
/*
* Copyright (C) 2016 Nicholas Jackson
* 2017 HAW Hamburg
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_cc2650_launchpad
* @{
*
* @file
* @brief Peripheral MCU configuration for TI CC2650 LaunchPad
*
* @author Nicholas Jackson <nicholas.jackson@griffithuni.edu.au>
* @author Sebastian Meiling <s@mlng.net>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock configuration
* @{
*/
/* the main clock is fixed to 48MHZ */
#define CLOCK_CORECLOCK (48000000U)
/** @} */
/**
* @name Timer configuration
*
* General purpose timers (GPT[0-3]) are configured consecutively and in order
* (without gaps) starting from GPT0, i.e. if multiple timers are enabled.
*
* @{
*/
static const timer_conf_t timer_config[] = {
{
.cfg = GPT_CFG_16T,
.chn = 2,
},
{
.cfg = GPT_CFG_32T,
.chn = 1,
},
{
.cfg = GPT_CFG_16T,
.chn = 2,
},
{
.cfg = GPT_CFG_32T,
.chn = 1,
}
};
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
*
* The used CC26x0 CPU only supports a single UART device, so all we need to
* configure are the RX and TX pins.
*
* Optionally we can enable hardware flow control, by setting UART_HW_FLOW_CTRL
* to 1 and defining pins for UART_CTS_PIN and UART_RTS_PIN.
* @{
*/
#define UART_NUMOF (1)
#define UART_RX_PIN (2)
#define UART_TX_PIN (3)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */