periph_conf.h
4.94 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
/*
* Copyright (C) 2017 Inria
* 2017 OTA keys
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_nucleo32-l432
* @{
*
* @file
* @brief Peripheral MCU configuration for the nucleo32-l432 board
*
* @author Alexandre Abadie <alexandre.abadie@inria.fr>
* @author Vincent Dupont <vincent@otakeys.com>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock system configuration
* @{
*/
/* 0: no external high speed crystal available
* else: actual crystal frequency [in Hz] */
#define CLOCK_HSE (0)
/* 0: no external low speed crystal available,
* 1: external crystal available (always 32.768kHz) */
#define CLOCK_LSE (1)
/* give the target core clock (HCLK) frequency [in Hz], maximum: 80MHz */
#define CLOCK_CORECLOCK (80000000U)
/* PLL configuration: make sure your values are legit!
*
* compute by: CORECLOCK = (((PLL_IN / M) * N) / R)
* with:
* PLL_IN: input clock, HSE or MSI @ 48MHz
* M: pre-divider, allowed range: [1:8]
* N: multiplier, allowed range: [8:86]
* R: post-divider, allowed range: [2,4,6,8]
*
* Also the following constraints need to be met:
* (PLL_IN / M) -> [4MHz:16MHz]
* (PLL_IN / M) * N -> [64MHz:344MHz]
* CORECLOCK -> 80MHz MAX!
*/
#define CLOCK_PLL_M (6)
#define CLOCK_PLL_N (20)
#define CLOCK_PLL_R (2)
/* peripheral clock setup */
#define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV4
#define CLOCK_APB1 (CLOCK_CORECLOCK / 4)
#define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV2
#define CLOCK_APB2 (CLOCK_CORECLOCK / 2)
/** @} */
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR1_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR1_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 15),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rx_af = GPIO_AF3,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB2,
.irqn = USART1_IRQn
},
};
#define UART_0_ISR (isr_usart2)
#define UART_1_ISR (isr_usart1)
#define UART_NUMOF (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */
/**
* @name PWM configuration
* @{
*/
static const pwm_conf_t pwm_config[] = {
{
.dev = TIM1,
.rcc_mask = RCC_APB2ENR_TIM1EN,
.chan = { { .pin = GPIO_PIN(PORT_A, 8) /* D9 */, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF1,
.bus = APB2
}
};
#define PWM_NUMOF (sizeof(pwm_config) / sizeof(pwm_config[0]))
/** @} */
/**
* @name SPI configuration
*
* @note The spi_divtable is auto-generated from
* `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
* @{
*/
static const uint8_t spi_divtable[2][5] = {
{ /* for APB1 @ 20000000Hz */
7, /* -> 78125Hz */
5, /* -> 312500Hz */
3, /* -> 1250000Hz */
1, /* -> 5000000Hz */
0 /* -> 10000000Hz */
},
{ /* for APB2 @ 40000000Hz */
7, /* -> 156250Hz */
6, /* -> 312500Hz */
4, /* -> 1250000Hz */
2, /* -> 5000000Hz */
1 /* -> 10000000Hz */
}
};
static const spi_conf_t spi_config[] = {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_B, 5),
.miso_pin = GPIO_PIN(PORT_B, 4),
.sclk_pin = GPIO_PIN(PORT_B, 3),
.cs_pin = GPIO_UNDEF,
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
};
#define SPI_NUMOF (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */
/**
* @name RTC configuration
* @{
*/
#define RTC_NUMOF (0U)
/** @} */
/**
* @name ADC configuration
* @{
*/
#define ADC_NUMOF (0U)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */