periph_conf.h 4.29 KB
/*
 * Copyright (C) 2017 Inria
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */

/**
 * @ingroup     boards_b-l072z-lrwan1
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the ST b-l072z-lrwan1 board
 *
 * @author      Alexandre Abadie <alexandre.abadie@inria.fr>
 */

#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H

#include "periph_cpu.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @name    Clock system configuration
 * @{
 */
#define CLOCK_HSI           (16000000U)         /* internal oscillator */
#define CLOCK_CORECLOCK     (32000000U)         /* desired core clock frequency */

/* configuration of PLL prescaler and multiply values */
/* CORECLOCK := HSI / CLOCK_PLL_DIV * CLOCK_PLL_MUL */
#define CLOCK_PLL_DIV       RCC_CFGR_PLLDIV2
#define CLOCK_PLL_MUL       RCC_CFGR_PLLMUL4
/* configuration of peripheral bus clock prescalers */
#define CLOCK_AHB_DIV       RCC_CFGR_HPRE_DIV1      /* AHB clock -> 32MHz */
#define CLOCK_APB2_DIV      RCC_CFGR_PPRE2_DIV1     /* APB2 clock -> 32MHz */
#define CLOCK_APB1_DIV      RCC_CFGR_PPRE1_DIV1     /* APB1 clock -> 32MHz */
/* configuration of flash access cycles */
#define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY

/* bus clocks for simplified peripheral initialization, UPDATE MANUALLY! */
#define CLOCK_AHB           (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2          (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1          (CLOCK_CORECLOCK / 1)
/** @} */

/**
 * @name    Timer configuration
 * @{
 */
static const timer_conf_t timer_config[] = {
    {
        .dev      = TIM2,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM2EN,
        .bus      = APB1,
        .irqn     = TIM2_IRQn
    }
};

#define TIMER_0_ISR         isr_tim2

#define TIMER_NUMOF         (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */

/**
 * @name    UART configuration
 * @{
 */
static const uart_conf_t uart_config[] = {
    {
        .dev        = USART2,
        .rcc_mask   = RCC_APB1ENR_USART2EN,
        .rx_pin     = GPIO_PIN(PORT_A, 3),
        .tx_pin     = GPIO_PIN(PORT_A, 2),
        .rx_af      = GPIO_AF4,
        .tx_af      = GPIO_AF4,
        .bus        = APB1,
        .irqn       = USART2_IRQn
    },
    {
        .dev        = USART1,
        .rcc_mask   = RCC_APB2ENR_USART1EN,
        .rx_pin     = GPIO_PIN(PORT_A, 10),
        .tx_pin     = GPIO_PIN(PORT_A, 9),
        .rx_af      = GPIO_AF4,
        .tx_af      = GPIO_AF4,
        .bus        = APB2,
        .irqn       = USART1_IRQn
    },
};

#define UART_0_ISR          (isr_usart2)
#define UART_1_ISR          (isr_usart1)

#define UART_NUMOF          (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */

/**
 * @name    SPI configuration
 *
 * @note    The spi_divtable is auto-generated from
 *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
 * @{
 */
static const uint8_t spi_divtable[2][5] = {
    {       /* for APB1 @ 32000000Hz */
        7,  /* -> 125000Hz */
        5,  /* -> 500000Hz */
        4,  /* -> 1000000Hz */
        2,  /* -> 4000000Hz */
        1   /* -> 8000000Hz */
    },
    {       /* for APB2 @ 32000000Hz */
        7,  /* -> 125000Hz */
        5,  /* -> 500000Hz */
        4,  /* -> 1000000Hz */
        2,  /* -> 4000000Hz */
        1   /* -> 8000000Hz */
    }
};

static const spi_conf_t spi_config[] = {
    {
        .dev      = SPI2,
        .mosi_pin = GPIO_PIN(PORT_B, 15),
        .miso_pin = GPIO_PIN(PORT_B, 14),
        .sclk_pin = GPIO_PIN(PORT_B, 13),
        .cs_pin   = GPIO_UNDEF,
        .af       = GPIO_AF0,
        .rccmask  = RCC_APB1ENR_SPI2EN,
        .apbbus   = APB1
    },
    {
        .dev      = SPI1, /* connected to SX1276 */
        .mosi_pin = GPIO_PIN(PORT_A, 7),
        .miso_pin = GPIO_PIN(PORT_A, 6),
        .sclk_pin = GPIO_PIN(PORT_B, 3),
        .cs_pin   = GPIO_UNDEF,
        .af       = GPIO_AF0,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    },
};

#define SPI_NUMOF           (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */

/**
 * @name    ADC configuration
 * @{
 */
#define ADC_NUMOF           (0)
/** @} */

/**
 * @name    RTC configuration
 * @{
 */
#define RTC_NUMOF           (1U)
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H */
/** @} */