Commit d57f23588e8e0ece7c7f235f00f18b239e29a151

Authored by mduquesn
1 parent f9db67b7

usb

Showing 3 changed files with 202 additions and 0 deletions   Show diff stats
SD.ino 0 → 100644
No preview for this file type
Saisie_clavier.ino 0 → 100644
@@ -0,0 +1,88 @@ @@ -0,0 +1,88 @@
  1 +#define OSX 0
  2 +#define WINDOWS 1
  3 +#define UBUNTU 2
  4 +#define ti 20
  5 +
  6 +#include "Keyboard.h"
  7 +#include <string.h>
  8 +
  9 +// change this to match your platform:
  10 +int platform = WINDOWS;
  11 +
  12 +void setup() {
  13 + // make pin 2 an input and turn on the pull-up resistor so it goes high unless
  14 + // connected to ground:
  15 + pinMode(2, INPUT_PULLUP);
  16 + Keyboard.begin();
  17 +}
  18 +
  19 +void keyboardprint ( String texte ){
  20 + int i = 0;
  21 + while (texte[i]!='\0'){
  22 + if(texte[i]=='@'){
  23 + Keyboard.write('"');
  24 + }
  25 + else if(texte[i]=='"'){
  26 + Keyboard.write('@');
  27 + }
  28 + else if(texte[i]=='\\'){
  29 + Keyboard.press(KEY_RIGHT_ALT);
  30 + Keyboard.press(92);
  31 + }
  32 + else {
  33 + Keyboard.write(texte[i]);
  34 + }
  35 + delay(ti);
  36 + Keyboard.releaseAll();
  37 + i++;
  38 + }
  39 + }
  40 +
  41 +void loop() {
  42 + while (digitalRead(2) == HIGH) {
  43 + // do nothing until pin 2 goes low
  44 + delay(500);
  45 + }
  46 + delay(1000);
  47 +
  48 + switch (platform) {
  49 + case OSX:
  50 + Keyboard.press(KEY_LEFT_GUI);
  51 + // Shift-Q logs out:
  52 + Keyboard.press(KEY_LEFT_SHIFT);
  53 + Keyboard.press('Q');
  54 + delay(100);
  55 + Keyboard.releaseAll();
  56 + // enter:
  57 + Keyboard.write(KEY_RETURN);
  58 + break;
  59 + case WINDOWS:
  60 + // ouvertur power shell
  61 + Keyboard.write(KEY_LEFT_GUI);
  62 + delay(ti);
  63 + keyboardprint("powershell");
  64 + Keyboard.write(KEY_RETURN);
  65 + delay(1000);
  66 + keyboardprint("Invoke-WebRequest -Uri ");
  67 + keyboardprint("\"https://www.mediacollege.com/audio/tone/files/440Hz_44100Hz_16bit_30sec.mp3\"");
  68 + keyboardprint(" -OutFile \"./mp3.mp3\"");
  69 + Keyboard.write(KEY_RETURN);
  70 + delay(1000);
  71 + keyboardprint(".\\mp3.mp3");
  72 + Keyboard.write(KEY_RETURN);
  73 + break;
  74 + case UBUNTU:
  75 + // CTRL-ALT-DEL:
  76 + Keyboard.press(KEY_LEFT_CTRL);
  77 + Keyboard.press(KEY_LEFT_ALT);
  78 + Keyboard.press(KEY_DELETE);
  79 + delay(1000);
  80 + Keyboard.releaseAll();
  81 + // Enter to confirm logout:
  82 + Keyboard.write(KEY_RETURN);
  83 + break;
  84 + }
  85 +
  86 + // do nothing:
  87 + while (true);
  88 +}
keygrbb.ino 0 → 100644
@@ -0,0 +1,113 @@ @@ -0,0 +1,113 @@
  1 +#include <Keyboard.h>
  2 +
  3 +#include <Wire.h>
  4 +#include "Adafruit_MPR121.h"
  5 +
  6 +#include <string.h>
  7 +#define ti 20
  8 +
  9 +#ifndef _BV
  10 +#define _BV(bit) (1 << (bit))
  11 +#endif
  12 +
  13 +// You can have up to 4 on one i2c bus but one is enough for testing!
  14 +Adafruit_MPR121 cap = Adafruit_MPR121();
  15 +
  16 +// Keeps track of the last pins touched
  17 +// so we know when buttons are 'released'
  18 +uint16_t lasttouched = 0;
  19 +uint16_t currtouched = 0;
  20 +int tab[]={3,7,15,2,6,14,1,5,9,0,4,8};
  21 +
  22 +
  23 +void Printstr(String msg){
  24 + Serial.println(msg);
  25 +}
  26 +
  27 +void keyboardprint ( String texte ){
  28 + int i = 0;
  29 + while (texte[i]!='\0'){
  30 + if(texte[i]=='@'){
  31 + Keyboard.write('"');
  32 + }
  33 + else if(texte[i]=='"'){
  34 + Keyboard.write('@');
  35 + }
  36 + else if(texte[i]=='\\'){
  37 + Keyboard.press(KEY_RIGHT_ALT);
  38 + Keyboard.press(92);
  39 + }
  40 + else {
  41 + Keyboard.write(texte[i]);
  42 + }
  43 + delay(ti);
  44 + Keyboard.releaseAll();
  45 + i++;
  46 + }
  47 + }
  48 +
  49 +void setup() {
  50 + //keyboard out
  51 + pinMode(2, INPUT_PULLUP);
  52 + Keyboard.begin();
  53 +
  54 + //Serial
  55 + Serial.begin(9600);
  56 +
  57 + while (!Serial) { // needed to keep leonardo/micro from starting too fast!
  58 + delay(10);
  59 + }
  60 +
  61 + //keyboard in
  62 + Serial.println("Adafruit MPR121 Capacitive Touch sensor test");
  63 +
  64 + // Default address is 0x5A, if tied to 3.3V its 0x5B
  65 + // If tied to SDA its 0x5C and if SCL then 0x5D
  66 + if (!cap.begin(0x5A)) {
  67 + Serial.println("MPR121 not found, check wiring?");
  68 + while (1);
  69 + }
  70 + Serial.println("MPR121 found!");
  71 +}
  72 +
  73 +
  74 +
  75 +
  76 +
  77 +void loop() {
  78 + // Get the currently touched pads
  79 + currtouched = cap.touched();
  80 +
  81 + for (uint8_t i=0; i<12; i++) {
  82 + // it if *is* touched and *wasnt* touched before, alert!
  83 + if ((currtouched & _BV(i)) && !(lasttouched & _BV(i)) ) {
  84 + Serial.print(tab[i]); Serial.println(" touched");
  85 + }
  86 + // if it *was* touched and now *isnt*, alert!
  87 + if (!(currtouched & _BV(i)) && (lasttouched & _BV(i)) ) {
  88 + Serial.print(tab[i]); Serial.println(" released");
  89 + }
  90 + }
  91 +
  92 + // reset our state
  93 + lasttouched = currtouched;
  94 +
  95 + // comment out this line for detailed data from the sensor!
  96 + return;
  97 +
  98 + // debugging info, what
  99 + Serial.print("\t\t\t\t\t\t\t\t\t\t\t\t\t 0x"); Serial.println(cap.touched(), HEX);
  100 + Serial.print("Filt: ");
  101 + for (uint8_t i=0; i<12; i++) {
  102 + Serial.print(cap.filteredData(i)); Serial.print("\t");
  103 + }
  104 + Serial.println();
  105 + Serial.print("Base: ");
  106 + for (uint8_t i=0; i<12; i++) {
  107 + Serial.print(cap.baselineData(i)); Serial.print("\t");
  108 + }
  109 + Serial.println();
  110 +
  111 + // put a delay so it isn't overwhelming
  112 + delay(100);
  113 +}