/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Joystick Host With HID Descriptor Parser Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF HID Specification \n * USBIF HID Usage Tables</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * Joystick host demonstration application. This gives a simple reference * application for implementing a USB Joystick host, for USB joysticks using * the standard joystick HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB joysticks. This * demo supports joysticks with a single HID report. * * Joystick movement and button presses are displayed on the board LEDs. * On connection to a USB joystick, the report items will be processed and * printed as a formatted list through the USART before the joystick is * fully enumerated. * * Currently only single interface joysticks are supported. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */