/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Dual HID Keyboard and Mouse Device Demo * * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * \li Series 7 USB AVRs (AT90USBxxx7) * \li Series 6 USB AVRs (AT90USBxxx6) * \li Series 4 USB AVRs (ATMEGAxxU4) * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) * \li Series B XMEGA AVRs (ATXMEGAxxxBx) * \li Series C XMEGA AVRs (ATXMEGAxxxCx) * * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Device</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF HID Specification \n * USBIF HID Usage Tables</td> * </tr> * <tr> * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> * </table> * * \section Sec_Description Project Description: * * Keyboard/Mouse demonstration application. This gives a simple reference * application for implementing a composite device containing both USB Keyboard * and USB Mouse functionality using the basic USB HID drivers in all modern OSes * (i.e. no special drivers required). This example uses two separate HID * interfaces for each function. It is boot protocol compatible, and thus works under * compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2). * * On start-up the system will automatically enumerate and function * as a keyboard when the USB connection to a host is present and the HWB is not * pressed. When enabled, manipulate the joystick to send the letters * a, b, c, d and e. See the USB HID documentation for more information * on sending keyboard event and key presses. * * When the HWB is pressed, the mouse mode is enabled. When enabled, move the * joystick to move the pointer, and push the joystick inwards to simulate a * left-button click. * * \section Sec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */