142ecdaf
 rguillom
first commit
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Host/Device Dual Role Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Dual Mode Host/Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Mouse host/device dual role demonstration application. This gives a simple
* reference application for implementing a dual role USB Mouse, for USB mice
* using the standard mouse boot protocol HID profile.
*
* <b>When in host mode:</b>
* Mouse movement and button presses are displayed on the board LEDs,
* as well as printed out the serial terminal as formatted dY, dY and
* button status information.
*
* This uses a naive method where the mouse is set to Boot Protocol mode, so
* that the report structure is fixed and known. A better implementation
* uses the HID report parser for correct report data processing across
* all compatible mice with advanced characteristics, as shown in the
* MouseHostWithParser Host demo application.
*
* Currently only single interface mice are supported.
*
* <b>When in device mode:</b>
* Upon enumeration the system will automatically enumerate and function
* as a mouse when the USB connection to a host is present. To use
* the mouse, move the joystick to move the pointer, and push the
* joystick inwards to simulate a left-button click. The HWB serves as
* the right mouse button.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/
|