/* ---------------------------------------------------------------------------- * SAM Software Package License * ---------------------------------------------------------------------------- * Copyright (c) 2012, Atmel Corporation * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following condition is met: * * - Redistributions of source code must retain the above copyright notice, * this list of conditions and the disclaimer below. * * Atmel's name may not be used to endorse or promote products derived from * this software without specific prior written permission. * * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ---------------------------------------------------------------------------- */ #ifndef _SAM3XA_PIOA_INSTANCE_ #define _SAM3XA_PIOA_INSTANCE_ #ifdef __cplusplus extern "C" { #endif /* ========== Register definition for PIOA peripheral ========== */ #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_PIOA_PER (0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */ #define REG_PIOA_PDR (0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */ #define REG_PIOA_PSR (0x400E0E08U) /**< \brief (PIOA) PIO Status Register */ #define REG_PIOA_OER (0x400E0E10U) /**< \brief (PIOA) Output Enable Register */ #define REG_PIOA_ODR (0x400E0E14U) /**< \brief (PIOA) Output Disable Register */ #define REG_PIOA_OSR (0x400E0E18U) /**< \brief (PIOA) Output Status Register */ #define REG_PIOA_IFER (0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */ #define REG_PIOA_IFDR (0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */ #define REG_PIOA_IFSR (0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */ #define REG_PIOA_SODR (0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */ #define REG_PIOA_CODR (0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */ #define REG_PIOA_ODSR (0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */ #define REG_PIOA_PDSR (0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */ #define REG_PIOA_IER (0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */ #define REG_PIOA_IDR (0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */ #define REG_PIOA_IMR (0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */ #define REG_PIOA_ISR (0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */ #define REG_PIOA_MDER (0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */ #define REG_PIOA_MDDR (0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */ #define REG_PIOA_MDSR (0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */ #define REG_PIOA_PUDR (0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */ #define REG_PIOA_PUER (0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */ #define REG_PIOA_PUSR (0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */ #define REG_PIOA_ABSR (0x400E0E70U) /**< \brief (PIOA) Peripheral AB Select Register */ #define REG_PIOA_SCIFSR (0x400E0E80U) /**< \brief (PIOA) System Clock Glitch Input Filter Select Register */ #define REG_PIOA_DIFSR (0x400E0E84U) /**< \brief (PIOA) Debouncing Input Filter Select Register */ #define REG_PIOA_IFDGSR (0x400E0E88U) /**< \brief (PIOA) Glitch or Debouncing Input Filter Clock Selection Status Register */ #define REG_PIOA_SCDR (0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */ #define REG_PIOA_OWER (0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */ #define REG_PIOA_OWDR (0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */ #define REG_PIOA_OWSR (0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */ #define REG_PIOA_AIMER (0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */ #define REG_PIOA_AIMDR (0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */ #define REG_PIOA_AIMMR (0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */ #define REG_PIOA_ESR (0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */ #define REG_PIOA_LSR (0x400E0EC4U) /**< \brief (PIOA) Level Select Register */ #define REG_PIOA_ELSR (0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */ #define REG_PIOA_FELLSR (0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */ #define REG_PIOA_REHLSR (0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */ #define REG_PIOA_FRLHSR (0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */ #define REG_PIOA_LOCKSR (0x400E0EE0U) /**< \brief (PIOA) Lock Status */ #define REG_PIOA_WPMR (0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */ #define REG_PIOA_WPSR (0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */ #else #define REG_PIOA_PER (*(WoReg*)0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */ #define REG_PIOA_PDR (*(WoReg*)0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */ #define REG_PIOA_PSR (*(RoReg*)0x400E0E08U) /**< \brief (PIOA) PIO Status Register */ #define REG_PIOA_OER (*(WoReg*)0x400E0E10U) /**< \brief (PIOA) Output Enable Register */ #define REG_PIOA_ODR (*(WoReg*)0x400E0E14U) /**< \brief (PIOA) Output Disable Register */ #define REG_PIOA_OSR (*(RoReg*)0x400E0E18U) /**< \brief (PIOA) Output Status Register */ #define REG_PIOA_IFER (*(WoReg*)0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */ #define REG_PIOA_IFDR (*(WoReg*)0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */ #define REG_PIOA_IFSR (*(RoReg*)0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */ #define REG_PIOA_SODR (*(WoReg*)0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */ #define REG_PIOA_CODR (*(WoReg*)0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */ #define REG_PIOA_ODSR (*(RwReg*)0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */ #define REG_PIOA_PDSR (*(RoReg*)0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */ #define REG_PIOA_IER (*(WoReg*)0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */ #define REG_PIOA_IDR (*(WoReg*)0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */ #define REG_PIOA_IMR (*(RoReg*)0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */ #define REG_PIOA_ISR (*(RoReg*)0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */ #define REG_PIOA_MDER (*(WoReg*)0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */ #define REG_PIOA_MDDR (*(WoReg*)0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */ #define REG_PIOA_MDSR (*(RoReg*)0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */ #define REG_PIOA_PUDR (*(WoReg*)0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */ #define REG_PIOA_PUER (*(WoReg*)0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */ #define REG_PIOA_PUSR (*(RoReg*)0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */ #define REG_PIOA_ABSR (*(RwReg*)0x400E0E70U) /**< \brief (PIOA) Peripheral AB Select Register */ #define REG_PIOA_SCIFSR (*(WoReg*)0x400E0E80U) /**< \brief (PIOA) System Clock Glitch Input Filter Select Register */ #define REG_PIOA_DIFSR (*(WoReg*)0x400E0E84U) /**< \brief (PIOA) Debouncing Input Filter Select Register */ #define REG_PIOA_IFDGSR (*(RoReg*)0x400E0E88U) /**< \brief (PIOA) Glitch or Debouncing Input Filter Clock Selection Status Register */ #define REG_PIOA_SCDR (*(RwReg*)0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */ #define REG_PIOA_OWER (*(WoReg*)0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */ #define REG_PIOA_OWDR (*(WoReg*)0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */ #define REG_PIOA_OWSR (*(RoReg*)0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */ #define REG_PIOA_AIMER (*(WoReg*)0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */ #define REG_PIOA_AIMDR (*(WoReg*)0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */ #define REG_PIOA_AIMMR (*(RoReg*)0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */ #define REG_PIOA_ESR (*(WoReg*)0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */ #define REG_PIOA_LSR (*(WoReg*)0x400E0EC4U) /**< \brief (PIOA) Level Select Register */ #define REG_PIOA_ELSR (*(RoReg*)0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */ #define REG_PIOA_FELLSR (*(WoReg*)0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */ #define REG_PIOA_REHLSR (*(WoReg*)0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */ #define REG_PIOA_FRLHSR (*(RoReg*)0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */ #define REG_PIOA_LOCKSR (*(RoReg*)0x400E0EE0U) /**< \brief (PIOA) Lock Status */ #define REG_PIOA_WPMR (*(RwReg*)0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */ #define REG_PIOA_WPSR (*(RoReg*)0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */ #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ #ifdef __cplusplus } #endif #endif /* _SAM3XA_PIOA_INSTANCE_ */