/** * @defgroup cpu_lpc11u34 NXP LPC11U34 * @ingroup cpu * @brief CMSIS Core Peripheral Assess Layer * @{ * @file * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File * for NXP LPC11uxx Device Series * @version: V0.1 * @date: 21. March 2011 * * @note * Copyright (C) 2009 ARM Limited. All rights reserved. * * @par * ARM Limited (ARM) is supplying this software for use with Cortex-M * processor based microcontrollers. This file can be freely distributed * within development tools that are supporting such ARM based processors. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * */ #ifndef LPC11UXX_H__ #define LPC11UXX_H__ #ifdef __cplusplus extern "C" { #endif #if defined ( __CC_ARM ) #pragma anon_unions #endif /* Interrupt Number Definition */ typedef enum { // ------------------------- Cortex-M0 Processor Exceptions Numbers ----------------------------- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ SysTick_IRQn = -1, /*!< 15 System Tick Timer */ // --------------------------- LPC11Uxx Specific Interrupt Numbers ------------------------------ FLEX_INT0_IRQn = 0, /*!< All I/O pins can be routed to below 8 interrupts.*/ FLEX_INT1_IRQn = 1, /*!< Flex interrupt 1 */ FLEX_INT2_IRQn = 2, /*!< Flex interrupt 2 */ FLEX_INT3_IRQn = 3, /*!< Flex interrupt 3 */ FLEX_INT4_IRQn = 4, /*!< Flex interrupt 4 */ FLEX_INT5_IRQn = 5, /*!< Flex interrupt 5 */ FLEX_INT6_IRQn = 6, /*!< Flex interrupt 6 */ FLEX_INT7_IRQn = 7, /*!< Flex interrupt 7 */ GINT0_IRQn = 8, /*!< Grouped Interrupt 0 */ GINT1_IRQn = 9, /*!< Grouped Interrupt 1 */ Reserved0_IRQn = 10, /*!< Reserved Interrupt */ Reserved1_IRQn = 11, /*!< Reserved Interrupt */ Reserved2_IRQn = 12, /*!< Reserved Interrupt */ Reserved3_IRQn = 13, /*!< Reserved Interrupt */ SSP1_IRQn = 14, /*!< SSP1 Interrupt */ I2C_IRQn = 15, /*!< I2C Interrupt */ TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */ TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */ TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */ TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */ SSP0_IRQn = 20, /*!< SSP0 Interrupt */ UART_IRQn = 21, /*!< UART Interrupt */ USB_IRQn = 22, /*!< USB IRQ Interrupt */ USB_FIQn = 23, /*!< USB FIQ Interrupt */ ADC_IRQn = 24, /*!< A/D Converter Interrupt */ WDT_IRQn = 25, /*!< Watchdog timer Interrupt */ BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */ FMC_IRQn = 27, /*!< Flash Memory Controller Interrupt */ Reserved4_IRQn = 28, /*!< Reserved Interrupt */ Reserved5_IRQn = 29, /*!< Reserved Interrupt */ USBWakeup_IRQn = 30, /*!< USB wakeup Interrupt */ Reserved6_IRQn = 31, /*!< Reserved Interrupt */ } IRQn_Type; /** @addtogroup Configuration_of_CMSIS * @{ */ /* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M0 Processor and Core Peripherals */ #define __MPU_PRESENT 0 /*!< MPU present or not */ #define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /** @} */ /* End of group Configuration_of_CMSIS */ #include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */ /** @addtogroup Device_Peripheral_Registers * @{ */ // ------------------------------------------------------------------------------------------------ // ----- I2C ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x I2C-bus controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (I2C) */ typedef struct { /*!< (@ 0x40000000) I2C Structure */ __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register */ __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register */ __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. */ __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0 */ __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word */ __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word */ __IO uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register*/ __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register*/ __IO uint32_t ADR1; /*!< (@ 0x40000020) I2C Slave Address Register 1*/ __IO uint32_t ADR2; /*!< (@ 0x40000024) I2C Slave Address Register 2*/ __IO uint32_t ADR3; /*!< (@ 0x40000028) I2C Slave Address Register 3*/ __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register */ union{ __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register */ struct{ __IO uint32_t MASK0; /*!< (@ 0x40000030) I2C Slave address mask register 0 */ __IO uint32_t MASK1; /*!< (@ 0x40000034) I2C Slave address mask register 1 */ __IO uint32_t MASK2; /*!< (@ 0x40000038) I2C Slave address mask register 2 */ __IO uint32_t MASK3; /*!< (@ 0x4000003C) I2C Slave address mask register 3 */ }; }; } LPC_I2C_Type; // ------------------------------------------------------------------------------------------------ // ----- WWDT ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x Windowed Watchdog Timer (WWDT) Modification date=3/16/2011 Major revision=0 Minor revision=3 (WWDT) */ typedef struct { /*!< (@ 0x40004000) WWDT Structure */ __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register*/ __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register */ __IO uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register */ __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register */ __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */ __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */ __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */ } LPC_WWDT_Type; // ------------------------------------------------------------------------------------------------ // ----- USART ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x USART Modification date=3/16/2011 Major revision=0 Minor revision=3 (USART) */ typedef struct { /*!< (@ 0x40008000) USART Structure */ union { __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */ __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */ __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */ }; union { __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */ __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */ }; union { __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */ __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */ }; __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */ __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */ __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */ __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */ __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */ __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */ __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */ __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */ __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */ __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */ __I uint32_t RESERVED0[3]; /*!< (@ 0x40008034) Reserved */ __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */ __I uint32_t RESERVED1; /*!< (@ 0x40008044) Reserved */ __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */ __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */ __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */ __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */ __IO uint32_t SYNCCTRL; /*!< (@ 0x40008058) Synchronous mode control */ } LPC_USART_Type; // ------------------------------------------------------------------------------------------------ // ----- Timer ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x 32-bitcounter/timers CT32B0/1 Modification date=3/16/2011 Major revision=0 Minor revision=3 */ typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */ __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register */ __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register */ __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter */ __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register */ __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter */ __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register */ union { __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register */ struct{ __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */ __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */ __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */ __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */ }; }; __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register */ union{ __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register */ struct{ __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */ __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */ __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */ __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */ }; }; __IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register */ __I uint32_t RESERVED0[12]; /*!< (@ 0x4001403C) Reserved */ __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register */ __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register */ } LPC_CTxxBx_Type; // ------------------------------------------------------------------------------------------------ // ----- ADC ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x ADC Modification date=3/16/2011 Major revision=0 Minor revision=3 (ADC) */ typedef struct { /*!< (@ 0x4001C000) ADC Structure */ __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register */ __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register */ __I uint32_t RESERVED0[1]; /*!< (@ 0x4001C008) Reserved */ __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register */ union{ __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/ struct{ __IO uint32_t DR0; /*!< (@ 0x40020010) A/D Channel Data Register 0*/ __IO uint32_t DR1; /*!< (@ 0x40020014) A/D Channel Data Register 1*/ __IO uint32_t DR2; /*!< (@ 0x40020018) A/D Channel Data Register 2*/ __IO uint32_t DR3; /*!< (@ 0x4002001C) A/D Channel Data Register 3*/ __IO uint32_t DR4; /*!< (@ 0x40020020) A/D Channel Data Register 4*/ __IO uint32_t DR5; /*!< (@ 0x40020024) A/D Channel Data Register 5*/ __IO uint32_t DR6; /*!< (@ 0x40020028) A/D Channel Data Register 6*/ __IO uint32_t DR7; /*!< (@ 0x4002002C) A/D Channel Data Register 7*/ }; }; __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. */ } LPC_ADC_Type; // ------------------------------------------------------------------------------------------------ // ----- PMU ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x Power Management Unit (PMU) Modification date=3/16/2011 Major revision=0 Minor revision=3 (PMU) */ typedef struct { /*!< (@ 0x40038000) PMU Structure */ __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */ union{ __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */ struct{ __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */ __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */ __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */ __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */ }; }; } LPC_PMU_Type; // ------------------------------------------------------------------------------------------------ // ----- FLASHCTRL ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x Flash programming firmware Modification date=3/17/2011 Major revision=0 Minor revision=3 (FLASHCTRL) */ typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */ __I uint32_t RESERVED0[4]; /*!< (@ 0x4003C000) Reserved */ __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */ __I uint32_t RESERVED1[3]; /*!< (@ 0x4003C014) Reserved */ __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */ __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */ __I uint32_t RESERVED2[1]; /*!< (@ 0x4003C028) Reserved */ __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */ __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */ __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */ __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */ __I uint32_t RESERVED3[1001]; /*!< (@ 0x4003C03C) Reserved */ __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */ __I uint32_t RESERVED4[1]; /*!< (@ 0x4003CFE4) Reserved */ __IO uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */ } LPC_FLASHCTRL_Type; // ------------------------------------------------------------------------------------------------ // ----- SSP0/1 ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x SSP/SPI Modification date=3/16/2011 Major revision=0 Minor revision=3 (SSP0) */ typedef struct { /*!< (@ 0x40040000) SSP0 Structure */ __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */ __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */ __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */ __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */ __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */ __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */ __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */ __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */ __IO uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */ } LPC_SSPx_Type; // ------------------------------------------------------------------------------------------------ // ----- IOCONFIG ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG) */ typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */ __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */ __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */ __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */ __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */ __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */ __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */ __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */ __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 */ __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 */ __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */ __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */ __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */ __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */ __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */ __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */ __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */ __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */ __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */ __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */ __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */ __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */ __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */ __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */ __IO uint32_t PIO1_0; /*!< (@ 0x40044060) I/O configuration for pin PIO1_0 */ __IO uint32_t PIO1_1; /*!< (@ 0x40044064) I/O configuration for pin PIO1_1 */ __IO uint32_t PIO1_2; /*!< (@ 0x40044068) I/O configuration for pin PIO1_2 */ __IO uint32_t PIO1_3; /*!< (@ 0x4004406C) I/O configuration for pin PIO1_3 */ __IO uint32_t PIO1_4; /*!< (@ 0x40044070) I/O configuration for pin PIO1_4 */ __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5 */ __IO uint32_t PIO1_6; /*!< (@ 0x40044078) I/O configuration for pin PIO1_6 */ __IO uint32_t PIO1_7; /*!< (@ 0x4004407C) I/O configuration for pin PIO1_7 */ __IO uint32_t PIO1_8; /*!< (@ 0x40044080) I/O configuration for pin PIO1_8 */ __IO uint32_t PIO1_9; /*!< (@ 0x40044084) I/O configuration for pin PIO1_9 */ __IO uint32_t PIO1_10; /*!< (@ 0x40044088) I/O configuration for pin PIO1_10 */ __IO uint32_t PIO1_11; /*!< (@ 0x4004408C) I/O configuration for pin PIO1_11 */ __IO uint32_t PIO1_12; /*!< (@ 0x40044090) I/O configuration for pin PIO1_12 */ __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for pin PIO1_13/DTR/CT16B0_MAT0/TXD */ __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for pin PIO1_14/DSR/CT16B0_MAT1/RXD */ __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */ __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */ __IO uint32_t PIO1_17; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */ __IO uint32_t PIO1_18; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */ __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */ __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */ __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */ __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */ __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */ __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */ __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */ __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */ __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */ __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */ __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */ __IO uint32_t PIO1_30; /*!< (@ 0x400440D8) I/O configuration for pin PIO1_30 */ __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */ } LPC_IOCON_Type; // ------------------------------------------------------------------------------------------------ // ----- SYSCON ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x System control block Modification date=3/16/2011 Major revision=0 Minor revision=3 (SYSCON) */ typedef struct { /*!< (@ 0x40048000) SYSCON Structure */ __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */ __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */ __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */ __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */ __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */ __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */ __I uint32_t RESERVED0[2]; /*!< (@ 0x40048018) Reserved */ __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */ __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */ __I uint32_t RESERVED1[2]; /*!< (@ 0x40048028) Reserved */ __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */ __I uint32_t RESERVED2[3]; /*!< (@ 0x40048034) Reserved */ __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */ __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */ __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */ __IO uint32_t USBPLLCLKUEN; /*!< (@ 0x4004804C) USB PLL clock source update enable */ __I uint32_t RESERVED3[8]; /*!< (@ 0x40048050) Reserved */ __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */ __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */ __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */ __I uint32_t RESERVED4[1]; /*!< (@ 0x4004807C) Reserved */ __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */ __I uint32_t RESERVED5[4]; /*!< (@ 0x40048084) Reserved */ __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */ __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */ __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */ __I uint32_t RESERVED6[8]; /*!< (@ 0x400480A0) Reserved */ __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */ __IO uint32_t USBCLKUEN; /*!< (@ 0x400480C4) USB clock source update enable */ __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */ __I uint32_t RESERVED7[5]; /*!< (@ 0x400480CC) Reserved */ __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */ __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */ __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */ __I uint32_t RESERVED8[5]; /*!< (@ 0x400480EC) Reserved */ __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */ __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */ __I uint32_t RESERVED9[18]; /*!< (@ 0x40048108) Reserved */ __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */ __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */ __I uint32_t RESERVED10[6]; /*!< (@ 0x40048158) Reserved */ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay */ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */ __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */ __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */ __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */ __I uint32_t RESERVED11[25]; /*!< (@ 0x400481A0) Reserved */ __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */ __I uint32_t RESERVED12[3]; /*!< (@ 0x40048208) Reserved */ __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */ __I uint32_t RESERVED13[6]; /*!< (@ 0x40048218) Reserved */ __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */ __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */ __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */ __I uint32_t RESERVED14[110]; /*!< (@ 0x4004823C) Reserved */ __I uint32_t DEVICE_ID; /*!< (@ 0x400483F4) Device ID */ } LPC_SYSCON_Type; // ------------------------------------------------------------------------------------------------ // ----- GPIO_PIN_INT ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PIN_INT) */ typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */ __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */ __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */ __IO uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */ __IO uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */ __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */ __IO uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */ __IO uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */ __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */ __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */ __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */ } LPC_GPIO_PIN_INT_Type; // ------------------------------------------------------------------------------------------------ // ----- GPIO_GROUP_INT0/1 ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_GROUP_INT0) */ typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */ __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */ __I uint32_t RESERVED0[7]; /*!< (@ 0x4005C004) Reserved */ __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */ __I uint32_t RESERVED1[6]; /*!< (@ 0x4005C02C) Reserved */ __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */ } LPC_GPIO_GROUP_INTx_Type; // ------------------------------------------------------------------------------------------------ // ----- USB ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x USB2.0device controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (USB) */ typedef struct { /*!< (@ 0x40080000) USB Structure */ __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40080000) USB Device Command/Status register */ __IO uint32_t INFO; /*!< (@ 0x40080004) USB Info register */ __IO uint32_t EPLISTSTART; /*!< (@ 0x40080008) USB EP Command/Status List start address */ __IO uint32_t DATABUFSTART; /*!< (@ 0x4008000C) USB Data buffer start address */ __IO uint32_t LPM; /*!< (@ 0x40080010) Link Power Management register */ __IO uint32_t EPSKIP; /*!< (@ 0x40080014) USB Endpoint skip */ __IO uint32_t EPINUSE; /*!< (@ 0x40080018) USB Endpoint Buffer in use */ __IO uint32_t EPBUFCFG; /*!< (@ 0x4008001C) USB Endpoint Buffer Configuration register */ __IO uint32_t INTSTAT; /*!< (@ 0x40080020) USB interrupt status register */ __IO uint32_t INTEN; /*!< (@ 0x40080024) USB interrupt enable register */ __IO uint32_t INTSETSTAT; /*!< (@ 0x40080028) USB set interrupt status register */ __IO uint32_t INTROUTING; /*!< (@ 0x4008002C) USB interrupt routing register */ __I uint32_t RESERVED0[1]; /*!< (@ 0x40080030) Reserved */ __I uint32_t EPTOGGLE; /*!< (@ 0x40080034) USB Endpoint toggle register */ } LPC_USB_Type; // ------------------------------------------------------------------------------------------------ // ----- GPIO_PORT ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT) */ typedef struct { union { struct { __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */ __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */ }; __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */ }; __I uint32_t RESERVED0[1008]; /*!< (@ 0x50000040) Reserved */ union { struct { __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */ __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */ }; __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */ }; uint32_t RESERVED1[960]; /*!< (@ 0x50001100) Reserved */ __IO uint32_t DIR[2]; /*!< 0x2000 */ uint32_t RESERVED2[30]; /*!< Reserved */ __IO uint32_t MASK[2]; /*!< 0x2080 */ uint32_t RESERVED3[30]; /*!< Reserved */ __IO uint32_t PIN[2]; /*!< 0x2100 */ uint32_t RESERVED4[30]; /*!< Reserved */ __IO uint32_t MPIN[2]; /*!< 0x2180 */ uint32_t RESERVED5[30]; /*!< Reserved */ __IO uint32_t SET[2]; /*!< 0x2200 */ uint32_t RESERVED6[30]; /*!< Reserved */ __O uint32_t CLR[2]; /*!< 0x2280 */ uint32_t RESERVED7[30]; /*!< Reserved */ __O uint32_t NOT[2]; /*!< 0x2300 */ } LPC_GPIO_Type; #if defined ( __CC_ARM ) #pragma no_anon_unions #endif /** * @brief Memory map definition for the peripherals * @{ */ #define LPC_I2C_BASE (0x40000000) #define LPC_WWDT_BASE (0x40004000) #define LPC_USART_BASE (0x40008000) #define LPC_CT16B0_BASE (0x4000C000) #define LPC_CT16B1_BASE (0x40010000) #define LPC_CT32B0_BASE (0x40014000) #define LPC_CT32B1_BASE (0x40018000) #define LPC_ADC_BASE (0x4001C000) #define LPC_PMU_BASE (0x40038000) #define LPC_FLASHCTRL_BASE (0x4003C000) #define LPC_SSP0_BASE (0x40040000) #define LPC_SSP1_BASE (0x40058000) #define LPC_IOCON_BASE (0x40044000) #define LPC_SYSCON_BASE (0x40048000) #define LPC_GPIO_PIN_INT_BASE (0x4004C000) #define LPC_GPIO_GROUP_INT0_BASE (0x4005C000) #define LPC_GPIO_GROUP_INT1_BASE (0x40060000) #define LPC_USB_BASE (0x40080000) #define LPC_GPIO_BASE (0x50000000) /* @} */ /** * @brief Peripheral declaration * @{ */ #define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE) #define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE) #define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE) #define LPC_CT16B0 ((LPC_CTxxBx_Type *) LPC_CT16B0_BASE) #define LPC_CT16B1 ((LPC_CTxxBx_Type *) LPC_CT16B1_BASE) #define LPC_CT32B0 ((LPC_CTxxBx_Type *) LPC_CT32B0_BASE) #define LPC_CT32B1 ((LPC_CTxxBx_Type *) LPC_CT32B1_BASE) #define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE) #define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE) #define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE) #define LPC_SSP0 ((LPC_SSPx_Type *) LPC_SSP0_BASE) #define LPC_SSP1 ((LPC_SSPx_Type *) LPC_SSP1_BASE) #define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE) #define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE) #define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE) #define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT0_BASE) #define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT1_BASE) #define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE) #define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE) /* @} */ /** @} */ /* End of group Device_Peripheral_Registers */ /** @} */ /* End of group (null) */ /** @} */ /* End of group LPC11Uxx */ #ifdef __cplusplus } #endif #endif /* LPC11UXX_H__ */ /** @} */