/* * Copyright (C) 2014 Loci Controls Inc. * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @defgroup cpu_cc2538_ioc CC2538 I/O Control * @ingroup cpu_cc2538_regs * @{ * * @file * @brief CC2538 I/O Control driver * * Header file with declarations for the I/O Control module * * @author Ian Martin * */ #ifndef CC2538_IOC_H_ #define CC2538_IOC_H_ #include #include "cc2538.h" #ifdef __cplusplus extern "C" { #endif /** * @name Port control register addresses * @{ */ #define IOC_PXX_SEL ( (cc2538_reg_t*)0x400d4000 ) #define IOC_PXX_OVER ( (cc2538_reg_t*)0x400d4080 ) /** @} */ /** @name Peripheral Signal Select Values (for IOC_Pxx_SEL registers) * @{ */ enum { UART0_TXD = 0, /**< UART0 TXD */ UART1_RTS = 1, /**< UART1 RTS */ UART1_TXD = 2, /**< UART1 TXD */ SSI0_TXD = 3, /**< SSI0 TXD */ SSI0_CLKOUT = 4, /**< SSI0 CLKOUT */ SSI0_FSSOUT = 5, /**< SSI0 FSSOUT */ SSI0_STXSER_EN = 6, /**< SSI0 STXSER EN */ SSI1_TXD = 7, /**< SSI1 TXD */ SSI1_CLKOUT = 8, /**< SSI1 CLKOUT */ SSI1_FSSOUT = 9, /**< SSI1 FSSOUT */ SSI1_STXSER_EN = 10, /**< SSI1 STXSER EN */ I2C_CMSSDA = 11, /**< I2C CMSSDA */ I2C_CMSSCL = 12, /**< I2C CMSSCL */ GPT0_ICP1 = 13, /**< GPT0 ICP1 */ GPT0_ICP2 = 14, /**< GPT0 ICP2 */ GPT1_ICP1 = 15, /**< GPT1 ICP1 */ GPT1_ICP2 = 16, /**< GPT1 ICP2 */ GPT2_ICP1 = 17, /**< GPT2 ICP1 */ GPT2_ICP2 = 18, /**< GPT2 ICP2 */ GPT3_ICP1 = 19, /**< GPT3 ICP1 */ GPT3_ICP2 = 20, /**< GPT3 ICP2 */ }; /** @} */ /** * @name Values for IOC_PXX_OVER * @{ */ #define IOC_OVERRIDE_OE 0x00000008 /**< Output Enable */ #define IOC_OVERRIDE_PUE 0x00000004 /**< Pull Up Enable */ #define IOC_OVERRIDE_PDE 0x00000002 /**< Pull Down Enable */ #define IOC_OVERRIDE_ANA 0x00000001 /**< Analog Enable */ #define IOC_OVERRIDE_DIS 0x00000000 /**< Override Disabled */ /** @} */ #ifdef __cplusplus } /* end extern "C" */ #endif #endif /* CC2538_IOC_H_ */ /** @} */