/* * Copyright (C) 2015 Freie Universität Berlin * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup boards_nucleo-f334 * @{ * * @file * @brief Peripheral MCU configuration for the nucleo-f334 board * * @author Hauke Petersen * @author Kaspar Schleiser */ #ifndef PERIPH_CONF_H_ #define PERIPH_CONF_H_ #include "periph_cpu.h" #ifdef __cplusplus extern "C" { #endif /** * @name Clock system configuration * @{ **/ #define CLOCK_HSE (8000000U) /* external oscillator */ #define CLOCK_CORECLOCK (72000000U) /* desired core clock frequency */ /* the actual PLL values are automatically generated */ #define CLOCK_PLL_MUL (CLOCK_CORECLOCK / CLOCK_HSE) #define CLOCK_AHB_DIV RCC_CFGR_HPRE_DIV1 #define CLOCK_APB2_DIV RCC_CFGR_PPRE2_DIV1 #define CLOCK_APB1_DIV RCC_CFGR_PPRE1_DIV2 #define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY_1 /* bus clocks for simplified peripheral initialization, UPDATE MANUALLY! */ #define CLOCK_AHB (CLOCK_CORECLOCK / 1) #define CLOCK_APB2 (CLOCK_CORECLOCK / 1) #define CLOCK_APB1 (CLOCK_CORECLOCK / 2) /** @} */ /** * @brief DAC configuration * @{ */ #define DAC_NUMOF (0) /** @} */ /** * @brief DAC configuration * @{ */ #define DAC_NUMOF (0) /** @} */ /** * @brief Timer configuration * @{ */ static const timer_conf_t timer_config[] = { { .dev = TIM2, .max = 0xffffffff, .rcc_mask = RCC_APB1ENR_TIM2EN, .bus = APB1, .irqn = TIM2_IRQn } }; #define TIMER_0_ISR (isr_tim2) #define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0])) /** @} */ /** * @brief UART configuration * @} */ #define UART_NUMOF (1U) #define UART_0_EN 1 #define UART_IRQ_PRIO 1 /* UART 0 device configuration */ #define UART_0_DEV USART2 #define UART_0_CLKEN() (periph_clk_en(APB1, RCC_APB1ENR_USART2EN)) #define UART_0_CLK (CLOCK_CORECLOCK / 2) /* UART clock runs with 32MHz (F_CPU / 1) */ #define UART_0_IRQ_CHAN USART2_IRQn #define UART_0_ISR isr_usart2 /* UART 0 pin configuration */ #define UART_0_PORT GPIOA #define UART_0_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN)) #define UART_0_RX_PIN 3 #define UART_0_TX_PIN 2 #define UART_0_AF 7 /** @} */ /** * @brief PWM configuration * @{ */ static const pwm_conf_t pwm_config[] = { { .dev = TIM3, .rcc_mask = RCC_APB1ENR_TIM3EN, .pins = { GPIO_PIN(PORT_C, 6), GPIO_PIN(PORT_C, 7), GPIO_PIN(PORT_C, 8), GPIO_PIN(PORT_C, 9) }, .af = GPIO_AF2, .chan = 4, .bus = APB1 } }; #define PWM_NUMOF (sizeof(pwm_config) / sizeof(pwm_config[0])) /** @} */ /** * @name SPI configuration * @{ */ #define SPI_NUMOF (1U) #define SPI_0_EN 1 #define SPI_IRQ_PRIO 1 /* SPI 0 device config */ #define SPI_0_DEV SPI1 #define SPI_0_CLKEN() (periph_clk_en(APB2, RCC_APB2ENR_SPI1EN)) #define SPI_0_CLKDIS() (periph_clk_dis(APB2, RCC_APB2ENR_SPI1EN)) #define SPI_0_IRQ SPI1_IRQn #define SPI_0_IRQ_HANDLER isr_spi1 /* SPI 0 pin configuration */ #define SPI_0_SCK_PORT GPIOA #define SPI_0_SCK_PIN 5 #define SPI_0_SCK_AF 5 #define SPI_0_SCK_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN)) #define SPI_0_MISO_PORT GPIOA #define SPI_0_MISO_PIN 6 #define SPI_0_MISO_AF 5 #define SPI_0_MISO_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN)) #define SPI_0_MOSI_PORT GPIOA #define SPI_0_MOSI_PIN 7 #define SPI_0_MOSI_AF 5 #define SPI_0_MOSI_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN)) /** @} */ #ifdef __cplusplus } #endif #endif /* PERIPH_CONF_H_ */ /** @} */