/*
 * Copyright (C) 2014 Freie Universität Berlin
 *
 * This file is subject to the terms and conditions of the GNU Lesser General
 * Public License v2.1. See the file LICENSE in the top level directory for more
 * details.
 */

/**
 * @ingroup     boards_fox
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the fox board
 *
 * @author      Thomas Eichinger <thomas.eichinger@fu-berlin.de>
 */

#ifndef PERIPH_CONF_H_
#define PERIPH_CONF_H_

#include "periph_cpu.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @name Clock system configuration
 * @{
 **/
#define CLOCK_HSE           (16000000U)             /* frequency of external oscillator */
#define CLOCK_CORECLOCK     (72000000U)             /* targeted core clock frequency */
/* configuration of PLL prescaler and multiply values */
/* CORECLOCK := CLOCK_SOURCE / PLL_DIV * PLL_MUL */
#define CLOCK_PLL_DIV       (2)
#define CLOCK_PLL_MUL       (9)
/* configuration of peripheral bus clock prescalers */
#define CLOCK_AHB_DIV       RCC_CFGR_HPRE_DIV1      /* AHB clock -> 72MHz */
#define CLOCK_APB2_DIV      RCC_CFGR_PPRE2_DIV1     /* APB2 clock -> 72MHz */
#define CLOCK_APB1_DIV      RCC_CFGR_PPRE1_DIV2     /* APB1 clock -> 36MHz */
/* resulting bus clocks */
#define CLOCK_APB1          (CLOCK_CORECLOCK / 2)
#define CLOCK_APB2          (CLOCK_CORECLOCK)
/* configuration of flash access cycles */
#define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY_2
/** @} */

/**
 * @name ADC configuration
 * @{
 */
#define ADC_NUMOF           (0)
/** @} */

/**
 * @brief   DAC configuration
 * @{
 */
#define DAC_NUMOF           (0)
/** @} */

/**
 * @brief   Timer configuration
 * @{
 */
static const timer_conf_t timer_config[] = {
    {
        .dev      = TIM2,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM2EN,
        .bus      = APB1,
        .irqn     = TIM2_IRQn
    },
    {
        .dev      = TIM3,
        .max      = 0x0000ffff,
        .rcc_mask = RCC_APB1ENR_TIM3EN,
        .bus      = APB1,
        .irqn     = TIM3_IRQn
    }
};

#define TIMER_0_ISR         isr_tim2
#define TIMER_1_ISR         isr_tim3

#define TIMER_NUMOF         (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */

/**
 * @brief   UART configuration
 * @{
 */
static const uart_conf_t uart_config[] = {
    {
        .dev     = USART2,
        .rx_pin  = GPIO_PIN(PORT_A, 3),
        .tx_pin  = GPIO_PIN(PORT_A, 2),
        .rcc_pin = RCC_APB1ENR_USART2EN,
        .bus     = APB1,
        .irqn    = USART2_IRQn
    },
    {
        .dev     = USART1,
        .rx_pin  = GPIO_PIN(PORT_A, 10),
        .tx_pin  = GPIO_PIN(PORT_A, 9),
        .rcc_pin = RCC_APB2ENR_USART1EN,
        .bus     = APB2,
        .irqn    = USART1_IRQn
    }
};

#define UART_0_ISR          isr_usart2
#define UART_1_ISR          isr_usart1

#define UART_NUMOF          (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */

/**
 * @brief SPI configuration
 * @{
 */
#define SPI_NUMOF           (1U)
#define SPI_0_EN            1

/* SPI 0 device configuration */
#define SPI_0_DEV           SPI2
#define SPI_0_CLKEN()       (periph_clk_en(APB1, RCC_APB1ENR_SPI2EN))
#define SPI_0_CLKDIS()      (periph_clk_dis(APB1, RCC_APB1ENR_SPI2EN))
#define SPI_0_BUS_DIV       0   /* 1 -> SPI runs with full CPU clock, 0 -> half CPU clock */
/* SPI 0 pin configuration */
#define SPI_0_CLK_PIN       GPIO_PIN(PORT_B,13)
#define SPI_0_MOSI_PIN      GPIO_PIN(PORT_B,15)
#define SPI_0_MISO_PIN      GPIO_PIN(PORT_B,14)
/** @} */

/**
 * @name Real time counter configuration
 * @{
 */
#define RTT_NUMOF           (1U)
#define RTT_IRQ_PRIO        1

#define RTT_DEV             RTC
#define RTT_IRQ             RTC_IRQn
#define RTT_ISR             isr_rtc
#define RTT_MAX_VALUE       (0xffffffff)
#define RTT_FREQUENCY       (1)             /* in Hz */
#define RTT_PRESCALER       (0x7fff)        /* run with 1 Hz */
/** @} */

/**
 * @name I2C configuration
  * @{
 */
#define I2C_NUMOF           (1U)
#define I2C_0_EN            1
#define I2C_IRQ_PRIO        1
#define I2C_APBCLK          (36000000U)

/* I2C 0 device configuration */
#define I2C_0_DEV           I2C1
#define I2C_0_CLKEN()       (periph_clk_en(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_CLKDIS()      (periph_clk_dis(APB1, RCC_APB1ENR_I2C1EN))
#define I2C_0_EVT_IRQ       I2C1_EV_IRQn
#define I2C_0_EVT_ISR       isr_i2c1_ev
#define I2C_0_ERR_IRQ       I2C1_ER_IRQn
#define I2C_0_ERR_ISR       isr_i2c1_er
/* I2C 0 pin configuration */
#define I2C_0_SCL_PIN       GPIO_PIN(PORT_B,6)
#define I2C_0_SDA_PIN       GPIO_PIN(PORT_B,7)
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H_ */
/** @} */