/* ---------------------------------------------------------------------------- * SAM Software Package License * ---------------------------------------------------------------------------- * Copyright (c) 2012, Atmel Corporation * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following condition is met: * * - Redistributions of source code must retain the above copyright notice, * this list of conditions and the disclaimer below. * * Atmel's name may not be used to endorse or promote products derived from * this software without specific prior written permission. * * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ---------------------------------------------------------------------------- */ #ifndef _SAM3XA_PIOF_INSTANCE_ #define _SAM3XA_PIOF_INSTANCE_ #ifdef __cplusplus extern "C" { #endif /* ========== Register definition for PIOF peripheral ========== */ #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_PIOF_PER (0x400E1800U) /**< \brief (PIOF) PIO Enable Register */ #define REG_PIOF_PDR (0x400E1804U) /**< \brief (PIOF) PIO Disable Register */ #define REG_PIOF_PSR (0x400E1808U) /**< \brief (PIOF) PIO Status Register */ #define REG_PIOF_OER (0x400E1810U) /**< \brief (PIOF) Output Enable Register */ #define REG_PIOF_ODR (0x400E1814U) /**< \brief (PIOF) Output Disable Register */ #define REG_PIOF_OSR (0x400E1818U) /**< \brief (PIOF) Output Status Register */ #define REG_PIOF_IFER (0x400E1820U) /**< \brief (PIOF) Glitch Input Filter Enable Register */ #define REG_PIOF_IFDR (0x400E1824U) /**< \brief (PIOF) Glitch Input Filter Disable Register */ #define REG_PIOF_IFSR (0x400E1828U) /**< \brief (PIOF) Glitch Input Filter Status Register */ #define REG_PIOF_SODR (0x400E1830U) /**< \brief (PIOF) Set Output Data Register */ #define REG_PIOF_CODR (0x400E1834U) /**< \brief (PIOF) Clear Output Data Register */ #define REG_PIOF_ODSR (0x400E1838U) /**< \brief (PIOF) Output Data Status Register */ #define REG_PIOF_PDSR (0x400E183CU) /**< \brief (PIOF) Pin Data Status Register */ #define REG_PIOF_IER (0x400E1840U) /**< \brief (PIOF) Interrupt Enable Register */ #define REG_PIOF_IDR (0x400E1844U) /**< \brief (PIOF) Interrupt Disable Register */ #define REG_PIOF_IMR (0x400E1848U) /**< \brief (PIOF) Interrupt Mask Register */ #define REG_PIOF_ISR (0x400E184CU) /**< \brief (PIOF) Interrupt Status Register */ #define REG_PIOF_MDER (0x400E1850U) /**< \brief (PIOF) Multi-driver Enable Register */ #define REG_PIOF_MDDR (0x400E1854U) /**< \brief (PIOF) Multi-driver Disable Register */ #define REG_PIOF_MDSR (0x400E1858U) /**< \brief (PIOF) Multi-driver Status Register */ #define REG_PIOF_PUDR (0x400E1860U) /**< \brief (PIOF) Pull-up Disable Register */ #define REG_PIOF_PUER (0x400E1864U) /**< \brief (PIOF) Pull-up Enable Register */ #define REG_PIOF_PUSR (0x400E1868U) /**< \brief (PIOF) Pad Pull-up Status Register */ #define REG_PIOF_ABSR (0x400E1870U) /**< \brief (PIOF) Peripheral AB Select Register */ #define REG_PIOF_SCIFSR (0x400E1880U) /**< \brief (PIOF) System Clock Glitch Input Filter Select Register */ #define REG_PIOF_DIFSR (0x400E1884U) /**< \brief (PIOF) Debouncing Input Filter Select Register */ #define REG_PIOF_IFDGSR (0x400E1888U) /**< \brief (PIOF) Glitch or Debouncing Input Filter Clock Selection Status Register */ #define REG_PIOF_SCDR (0x400E188CU) /**< \brief (PIOF) Slow Clock Divider Debouncing Register */ #define REG_PIOF_OWER (0x400E18A0U) /**< \brief (PIOF) Output Write Enable */ #define REG_PIOF_OWDR (0x400E18A4U) /**< \brief (PIOF) Output Write Disable */ #define REG_PIOF_OWSR (0x400E18A8U) /**< \brief (PIOF) Output Write Status Register */ #define REG_PIOF_AIMER (0x400E18B0U) /**< \brief (PIOF) Additional Interrupt Modes Enable Register */ #define REG_PIOF_AIMDR (0x400E18B4U) /**< \brief (PIOF) Additional Interrupt Modes Disables Register */ #define REG_PIOF_AIMMR (0x400E18B8U) /**< \brief (PIOF) Additional Interrupt Modes Mask Register */ #define REG_PIOF_ESR (0x400E18C0U) /**< \brief (PIOF) Edge Select Register */ #define REG_PIOF_LSR (0x400E18C4U) /**< \brief (PIOF) Level Select Register */ #define REG_PIOF_ELSR (0x400E18C8U) /**< \brief (PIOF) Edge/Level Status Register */ #define REG_PIOF_FELLSR (0x400E18D0U) /**< \brief (PIOF) Falling Edge/Low Level Select Register */ #define REG_PIOF_REHLSR (0x400E18D4U) /**< \brief (PIOF) Rising Edge/ High Level Select Register */ #define REG_PIOF_FRLHSR (0x400E18D8U) /**< \brief (PIOF) Fall/Rise - Low/High Status Register */ #define REG_PIOF_LOCKSR (0x400E18E0U) /**< \brief (PIOF) Lock Status */ #define REG_PIOF_WPMR (0x400E18E4U) /**< \brief (PIOF) Write Protect Mode Register */ #define REG_PIOF_WPSR (0x400E18E8U) /**< \brief (PIOF) Write Protect Status Register */ #else #define REG_PIOF_PER (*(WoReg*)0x400E1800U) /**< \brief (PIOF) PIO Enable Register */ #define REG_PIOF_PDR (*(WoReg*)0x400E1804U) /**< \brief (PIOF) PIO Disable Register */ #define REG_PIOF_PSR (*(RoReg*)0x400E1808U) /**< \brief (PIOF) PIO Status Register */ #define REG_PIOF_OER (*(WoReg*)0x400E1810U) /**< \brief (PIOF) Output Enable Register */ #define REG_PIOF_ODR (*(WoReg*)0x400E1814U) /**< \brief (PIOF) Output Disable Register */ #define REG_PIOF_OSR (*(RoReg*)0x400E1818U) /**< \brief (PIOF) Output Status Register */ #define REG_PIOF_IFER (*(WoReg*)0x400E1820U) /**< \brief (PIOF) Glitch Input Filter Enable Register */ #define REG_PIOF_IFDR (*(WoReg*)0x400E1824U) /**< \brief (PIOF) Glitch Input Filter Disable Register */ #define REG_PIOF_IFSR (*(RoReg*)0x400E1828U) /**< \brief (PIOF) Glitch Input Filter Status Register */ #define REG_PIOF_SODR (*(WoReg*)0x400E1830U) /**< \brief (PIOF) Set Output Data Register */ #define REG_PIOF_CODR (*(WoReg*)0x400E1834U) /**< \brief (PIOF) Clear Output Data Register */ #define REG_PIOF_ODSR (*(RwReg*)0x400E1838U) /**< \brief (PIOF) Output Data Status Register */ #define REG_PIOF_PDSR (*(RoReg*)0x400E183CU) /**< \brief (PIOF) Pin Data Status Register */ #define REG_PIOF_IER (*(WoReg*)0x400E1840U) /**< \brief (PIOF) Interrupt Enable Register */ #define REG_PIOF_IDR (*(WoReg*)0x400E1844U) /**< \brief (PIOF) Interrupt Disable Register */ #define REG_PIOF_IMR (*(RoReg*)0x400E1848U) /**< \brief (PIOF) Interrupt Mask Register */ #define REG_PIOF_ISR (*(RoReg*)0x400E184CU) /**< \brief (PIOF) Interrupt Status Register */ #define REG_PIOF_MDER (*(WoReg*)0x400E1850U) /**< \brief (PIOF) Multi-driver Enable Register */ #define REG_PIOF_MDDR (*(WoReg*)0x400E1854U) /**< \brief (PIOF) Multi-driver Disable Register */ #define REG_PIOF_MDSR (*(RoReg*)0x400E1858U) /**< \brief (PIOF) Multi-driver Status Register */ #define REG_PIOF_PUDR (*(WoReg*)0x400E1860U) /**< \brief (PIOF) Pull-up Disable Register */ #define REG_PIOF_PUER (*(WoReg*)0x400E1864U) /**< \brief (PIOF) Pull-up Enable Register */ #define REG_PIOF_PUSR (*(RoReg*)0x400E1868U) /**< \brief (PIOF) Pad Pull-up Status Register */ #define REG_PIOF_ABSR (*(RwReg*)0x400E1870U) /**< \brief (PIOF) Peripheral AB Select Register */ #define REG_PIOF_SCIFSR (*(WoReg*)0x400E1880U) /**< \brief (PIOF) System Clock Glitch Input Filter Select Register */ #define REG_PIOF_DIFSR (*(WoReg*)0x400E1884U) /**< \brief (PIOF) Debouncing Input Filter Select Register */ #define REG_PIOF_IFDGSR (*(RoReg*)0x400E1888U) /**< \brief (PIOF) Glitch or Debouncing Input Filter Clock Selection Status Register */ #define REG_PIOF_SCDR (*(RwReg*)0x400E188CU) /**< \brief (PIOF) Slow Clock Divider Debouncing Register */ #define REG_PIOF_OWER (*(WoReg*)0x400E18A0U) /**< \brief (PIOF) Output Write Enable */ #define REG_PIOF_OWDR (*(WoReg*)0x400E18A4U) /**< \brief (PIOF) Output Write Disable */ #define REG_PIOF_OWSR (*(RoReg*)0x400E18A8U) /**< \brief (PIOF) Output Write Status Register */ #define REG_PIOF_AIMER (*(WoReg*)0x400E18B0U) /**< \brief (PIOF) Additional Interrupt Modes Enable Register */ #define REG_PIOF_AIMDR (*(WoReg*)0x400E18B4U) /**< \brief (PIOF) Additional Interrupt Modes Disables Register */ #define REG_PIOF_AIMMR (*(RoReg*)0x400E18B8U) /**< \brief (PIOF) Additional Interrupt Modes Mask Register */ #define REG_PIOF_ESR (*(WoReg*)0x400E18C0U) /**< \brief (PIOF) Edge Select Register */ #define REG_PIOF_LSR (*(WoReg*)0x400E18C4U) /**< \brief (PIOF) Level Select Register */ #define REG_PIOF_ELSR (*(RoReg*)0x400E18C8U) /**< \brief (PIOF) Edge/Level Status Register */ #define REG_PIOF_FELLSR (*(WoReg*)0x400E18D0U) /**< \brief (PIOF) Falling Edge/Low Level Select Register */ #define REG_PIOF_REHLSR (*(WoReg*)0x400E18D4U) /**< \brief (PIOF) Rising Edge/ High Level Select Register */ #define REG_PIOF_FRLHSR (*(RoReg*)0x400E18D8U) /**< \brief (PIOF) Fall/Rise - Low/High Status Register */ #define REG_PIOF_LOCKSR (*(RoReg*)0x400E18E0U) /**< \brief (PIOF) Lock Status */ #define REG_PIOF_WPMR (*(RwReg*)0x400E18E4U) /**< \brief (PIOF) Write Protect Mode Register */ #define REG_PIOF_WPSR (*(RoReg*)0x400E18E8U) /**< \brief (PIOF) Write Protect Status Register */ #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ #ifdef __cplusplus } #endif #endif /* _SAM3XA_PIOF_INSTANCE_ */