/* * Copyright (C) 2014 INRIA. * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup sys_shell_commands * @{ * * @file * @brief Provides prototypes and sets up available shell commands * * @author Oliver Hahm * @author Zakaria Kasmi * @author Ludwig Knüpfer * * @} */ #include #include "shell_commands.h" extern int _reboot_handler(int argc, char **argv); #ifdef MODULE_CONFIG extern int _id_handler(int argc, char **argv); #endif #ifdef MODULE_LPC_COMMON extern int _heap_handler(int argc, char **argv); #endif #ifdef MODULE_PS extern int _ps_handler(int argc, char **argv); #endif #ifdef MODULE_SHT11 extern int _get_temperature_handler(int argc, char **argv); extern int _get_humidity_handler(int argc, char **argv); extern int _get_weather_handler(int argc, char **argv); extern int _set_offset_handler(int argc, char **argv); #endif #ifdef MODULE_LTC4150 extern int _get_current_handler(int argc, char **argv); extern int _reset_current_handler(int argc, char **argv); #endif #ifdef MODULE_AT30TSE75X extern int _at30tse75x_handler(int argc, char **argv); #endif #ifdef MODULE_SAUL_REG extern int _saul(int argc, char **argv); #endif #if FEATURE_PERIPH_RTC extern int _rtc_handler(int argc, char **argv); #endif #ifdef CPU_X86 extern int _x86_lspci(int argc, char **argv); #endif #ifdef MODULE_MCI extern int _get_sectorsize(int argc, char **argv); extern int _get_blocksize(int argc, char **argv); extern int _get_sectorcount(int argc, char **argv); extern int _read_sector(int argc, char **argv); extern int _read_bytes(int argc, char **argv); #endif #ifdef MODULE_GNRC_ICMPV6_ECHO #ifdef MODULE_XTIMER extern int _icmpv6_ping(int argc, char **argv); #endif #endif #ifdef MODULE_RANDOM extern int _random_init(int argc, char **argv); extern int _random_get(int argc, char **argv); #endif #ifdef MODULE_GNRC_NETIF extern int _netif_config(int argc, char **argv); extern int _netif_send(int argc, char **argv); #endif #ifdef MODULE_FIB extern int _fib_route_handler(int argc, char **argv); #endif #ifdef MODULE_GNRC_IPV6_NC extern int _ipv6_nc_manage(int argc, char **argv); extern int _ipv6_nc_routers(int argc, char **argv); #endif #ifdef MODULE_GNRC_IPV6_WHITELIST extern int _whitelist(int argc, char **argv); #endif #ifdef MODULE_GNRC_IPV6_BLACKLIST extern int _blacklist(int argc, char **argv); #endif #ifdef MODULE_GNRC_ZEP #ifdef MODULE_IPV6_ADDR extern int _zep_init(int argc, char **argv); #endif #endif #ifdef MODULE_GNRC_RPL extern int _gnrc_rpl(int argc, char **argv); #endif #ifdef MODULE_GNRC_SIXLOWPAN_CTX #ifdef MODULE_GNRC_SIXLOWPAN_ND_BORDER_ROUTER extern int _gnrc_6ctx(int argc, char **argv); #endif #endif #ifdef MODULE_CCN_LITE_UTILS extern int _ccnl_open(int argc, char **argv); extern int _ccnl_content(int argc, char **argv); extern int _ccnl_interest(int argc, char **argv); extern int _ccnl_fib(int argc, char **argv); #endif #ifdef MODULE_SNTP extern int _ntpdate(int argc, char **argv); #endif const shell_command_t _shell_command_list[] = { {"reboot", "Reboot the node", _reboot_handler}, #ifdef MODULE_CONFIG {"id", "Gets or sets the node's id.", _id_handler}, #endif #ifdef MODULE_LPC_COMMON {"heap", "Shows the heap state for the LPC2387 on the command shell.", _heap_handler}, #endif #ifdef MODULE_PS {"ps", "Prints information about running threads.", _ps_handler}, #endif #ifdef MODULE_SHT11 {"temp", "Prints measured temperature.", _get_temperature_handler}, {"hum", "Prints measured humidity.", _get_humidity_handler}, {"weather", "Prints measured humidity and temperature.", _get_weather_handler}, {"offset", "Set temperature offset.", _set_offset_handler}, #endif #ifdef MODULE_LTC4150 {"cur", "Prints current and average power consumption.", _get_current_handler}, {"rstcur", "Resets coulomb counter.", _reset_current_handler}, #endif #ifdef MODULE_AT30TSE75X {"at30tse75x", "Test AT30TSE75X temperature sensor", _at30tse75x_handler}, #endif #ifdef MODULE_MCI {DISK_READ_SECTOR_CMD, "Reads the specified sector of inserted memory card", _read_sector}, {DISK_READ_BYTES_CMD, "Reads the specified bytes from inserted memory card", _read_bytes}, {DISK_GET_SECTOR_SIZE, "Get the sector size of inserted memory card", _get_sectorsize}, {DISK_GET_SECTOR_COUNT, "Get the sector count of inserted memory card", _get_sectorcount}, {DISK_GET_BLOCK_SIZE, "Get the block size of inserted memory card", _get_blocksize}, #endif #ifdef MODULE_GNRC_ICMPV6_ECHO #ifdef MODULE_XTIMER { "ping6", "Ping via ICMPv6", _icmpv6_ping }, #endif #endif #ifdef MODULE_RANDOM { "random_init", "initializes the PRNG", _random_init }, { "random_get", "returns 32 bit of pseudo randomness", _random_get }, #endif #if FEATURE_PERIPH_RTC {"rtc", "control RTC peripheral interface", _rtc_handler}, #endif #ifdef CPU_X86 {"lspci", "Lists PCI devices", _x86_lspci}, #endif #ifdef MODULE_GNRC_NETIF {"ifconfig", "Configure network interfaces", _netif_config}, {"txtsnd", "Sends a custom string as is over the link layer", _netif_send }, #endif #ifdef MODULE_FIB {"fibroute", "Manipulate the FIB (info: 'fibroute [add|del]')", _fib_route_handler}, #endif #ifdef MODULE_GNRC_IPV6_NC {"ncache", "manage neighbor cache by hand", _ipv6_nc_manage }, {"routers", "IPv6 default router list", _ipv6_nc_routers }, #endif #ifdef MODULE_GNRC_IPV6_WHITELIST {"whitelist", "whitelists an address for receival ('whitelist [add|del|help]')", _whitelist }, #endif #ifdef MODULE_GNRC_IPV6_BLACKLIST {"blacklist", "blacklists an address for receival ('blacklist [add|del|help]')", _blacklist }, #endif #ifdef MODULE_GNRC_ZEP #ifdef MODULE_IPV6_ADDR {"zep_init", "initializes ZEP (Zigbee Encapsulation Protocol)", _zep_init }, #endif #endif #ifdef MODULE_GNRC_RPL {"rpl", "rpl configuration tool ('rpl help' for more information)", _gnrc_rpl }, #endif #ifdef MODULE_GNRC_SIXLOWPAN_CTX #ifdef MODULE_GNRC_SIXLOWPAN_ND_BORDER_ROUTER {"6ctx", "6LoWPAN context configuration tool", _gnrc_6ctx }, #endif #endif #ifdef MODULE_SAUL_REG {"saul", "interact with sensors and actuators using SAUL", _saul }, #endif #ifdef MODULE_CCN_LITE_UTILS { "ccnl_open", "opens an interface or socket", _ccnl_open }, { "ccnl_int", "sends an interest", _ccnl_interest }, { "ccnl_cont", "create content and populated it", _ccnl_content }, { "ccnl_fib", "shows or modifies the CCN-Lite FIB", _ccnl_fib }, #endif #ifdef MODULE_SNTP { "ntpdate", "synchronizes with a remote time server", _ntpdate }, #endif {NULL, NULL, NULL} };