/*
 * Copyright (C) 2014 Freie Universität Berlin
 *
 * This file is subject to the terms and conditions of the GNU Lesser General
 * Public License v2.1. See the file LICENSE in the top level directory for more
 * details.
 */

/**
 * @ingroup     boards_nucleo-l1
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the nucleo-l1 board
 *
 * @author      Thomas Eichinger <thomas.eichinger@fu-berlin.de>
 */

#ifndef PERIPH_CONF_H_
#define PERIPH_CONF_H_

#include "periph_cpu.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @name Clock system configuration
 * @{
 **/
#define CLOCK_HSI           (16000000U)             /* frequency of internal oscillator */
#define CLOCK_CORECLOCK     (32000000U)             /* targeted core clock frequency */
/* configuration of PLL prescaler and multiply values */
/* CORECLOCK := HSI / CLOCK_PLL_DIV * CLOCK_PLL_MUL */
#define CLOCK_PLL_DIV       RCC_CFGR_PLLDIV2
#define CLOCK_PLL_MUL       RCC_CFGR_PLLMUL4
/* configuration of peripheral bus clock prescalers */
#define CLOCK_AHB_DIV       RCC_CFGR_HPRE_DIV1      /* AHB clock -> 32MHz */
#define CLOCK_APB2_DIV      RCC_CFGR_PPRE2_DIV1     /* APB2 clock -> 32MHz */
#define CLOCK_APB1_DIV      RCC_CFGR_PPRE1_DIV1     /* APB1 clock -> 32MHz */
/* configuration of flash access cycles */
#define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY

/* bus clocks for simplified peripheral initialization, UPDATE MANUALLY! */
#define CLOCK_AHB           (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2          (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1          (CLOCK_CORECLOCK / 1)
/** @} */

/**
 * @brief   DAC configuration
 * @{
 */
#define DAC_NUMOF           (0)
/** @} */

/**
 * @brief Timer configuration
 * @{
 */
static const timer_conf_t timer_config[] = {
    {
        .dev      = TIM5,
        .max      = 0xffffffff,
        .rcc_mask = RCC_APB1ENR_TIM5EN,
        .bus      = APB1,
        .irqn     = TIM5_IRQn
    }
};

#define TIMER_0_ISR         (isr_tim5)

#define TIMER_NUMOF         (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */

/**
 * @name Real time counter configuration
 * @{
 */
#define RTC_NUMOF           (1U)

/**
 * @brief UART configuration
 */
#define UART_NUMOF          (1U)
#define UART_0_EN           1
#define UART_IRQ_PRIO       1

/* UART 0 device configuration */
#define UART_0_DEV          USART2
#define UART_0_CLKEN()      (periph_clk_en(APB1, RCC_APB1ENR_USART2EN))
#define UART_0_CLK          (CLOCK_CORECLOCK)   /* UART clock runs with 32MHz (F_CPU / 1) */
#define UART_0_IRQ          USART2_IRQn
#define UART_0_ISR          isr_usart2
#define UART_0_BUS_FREQ     32000000
/* UART 0 pin configuration */
#define UART_0_RX_PIN       GPIO_PIN(PORT_A, 3)
#define UART_0_TX_PIN       GPIO_PIN(PORT_A, 2)
#define UART_0_AF           GPIO_AF7

/**
 * @brief SPI configuration
 * @{
 */
#define SPI_NUMOF           (1U)
#define SPI_0_EN            1

/* SPI 0 device configuration */
#define SPI_0_DEV           SPI1
#define SPI_0_CLKEN()       (periph_clk_en(APB2, RCC_APB2ENR_SPI1EN))
#define SPI_0_CLKDIS()      (periph_clk_dis(APB2, RCC_APB2ENR_SPI1EN))
#define SPI_0_IRQ           SPI1_IRQn
#define SPI_0_ISR           isr_spi1
/* SPI 0 pin configuration */
#define SPI_0_PORT_CLKEN()  (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN))
#define SPI_0_PORT          GPIOA
#define SPI_0_PIN_SCK       5
#define SPI_0_PIN_MOSI      7
#define SPI_0_PIN_MISO      6
#define SPI_0_PIN_AF        5
/** @} */

/**
 * @name I2C configuration
  * @{
 */
#define I2C_0_EN            1
#define I2C_1_EN            1
#define I2C_NUMOF           (I2C_0_EN + I2C_1_EN)
#define I2C_IRQ_PRIO        1
#define I2C_APBCLK          (36000000U)

/* I2C 0 device configuration */
#define I2C_0_EVT_ISR       isr_i2c1_ev
#define I2C_0_ERR_ISR       isr_i2c1_er

/* I2C 1 device configuration */
#define I2C_1_EVT_ISR       isr_i2c2_ev
#define I2C_1_ERR_ISR       isr_i2c2_er

static const i2c_conf_t i2c_config[] = {
    /* device, port, scl-, sda-pin-number, I2C-AF, ER-IRQn, EV-IRQn */
    {I2C1, GPIO_PIN(PORT_B,  8), GPIO_PIN(PORT_B,  9), GPIO_OD_PU,
     GPIO_AF4, I2C1_ER_IRQn, I2C1_EV_IRQn},
    {I2C2, GPIO_PIN(PORT_B, 10), GPIO_PIN(PORT_B, 11), GPIO_OD_PU,
     GPIO_AF4, I2C2_ER_IRQn, I2C2_EV_IRQn},
};

/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H_ */
/** @} */