/* * Copyright (C) 2015-2016 Freie Universität Berlin * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup cpu_stm32f4 * @{ * * @file * @brief CPU specific definitions for internal peripheral handling * * @author Hauke Petersen */ #ifndef PERIPH_CPU_H #define PERIPH_CPU_H #include "periph_cpu_common.h" #ifdef __cplusplus extern "C" { #endif /** * @brief Available number of ADC devices */ #if defined(CPU_MODEL_STM32F401RE) #define ADC_DEVS (1U) #elif defined(CPU_MODEL_STM32F407VG) || defined(CPU_MODEL_STM32F415RG) || defined(CPU_MODEL_STM32F446RE) #define ADC_DEVS (3U) #endif /** * @brief declare needed generic SPI functions * @{ */ #define PERIPH_SPI_NEEDS_TRANSFER_BYTES #define PERIPH_SPI_NEEDS_TRANSFER_REG #define PERIPH_SPI_NEEDS_TRANSFER_REGS /** @} */ #ifndef DOXYGEN /** * @brief Override the ADC resolution configuration * @{ */ #define HAVE_ADC_RES_T typedef enum { ADC_RES_6BIT = 0x03000000, /**< ADC resolution: 6 bit */ ADC_RES_8BIT = 0x02000000, /**< ADC resolution: 8 bit */ ADC_RES_10BIT = 0x01000000, /**< ADC resolution: 10 bit */ ADC_RES_12BIT = 0x00000000, /**< ADC resolution: 12 bit */ ADC_RES_14BIT = 1, /**< ADC resolution: 14 bit (not supported) */ ADC_RES_16BIT = 2 /**< ADC resolution: 16 bit (not supported)*/ } adc_res_t; /** @} */ #endif /* ndef DOXYGEN */ /** * @brief Generate GPIO mode bitfields * * We use 5 bit to encode the mode: * - bit 0+1: pin mode (input / output) * - bit 2+3: pull resistor configuration * - bit 4: output type (0: push-pull, 1: open-drain) */ #define GPIO_MODE(io, pr, ot) ((io << 0) | (pr << 2) | (ot << 4)) #ifndef DOXYGEN /** * @brief Override GPIO mode options * @{ */ #define HAVE_GPIO_MODE_T typedef enum { GPIO_IN = GPIO_MODE(0, 0, 0), /**< input w/o pull R */ GPIO_IN_PD = GPIO_MODE(0, 2, 0), /**< input with pull-down */ GPIO_IN_PU = GPIO_MODE(0, 1, 0), /**< input with pull-up */ GPIO_OUT = GPIO_MODE(1, 0, 0), /**< push-pull output */ GPIO_OD = GPIO_MODE(1, 0, 1), /**< open-drain w/o pull R */ GPIO_OD_PU = GPIO_MODE(1, 1, 1) /**< open-drain with pull-up */ } gpio_mode_t; /** @} */ #endif /* ndef DOXYGEN */ /** * @brief Available ports on the STM32F4 family */ enum { PORT_A = 0, /**< port A */ PORT_B = 1, /**< port B */ PORT_C = 2, /**< port C */ PORT_D = 3, /**< port D */ PORT_E = 4, /**< port E */ PORT_F = 5, /**< port F */ PORT_G = 6, /**< port G */ PORT_H = 7, /**< port H */ PORT_I = 8 /**< port I */ }; /** * @brief Structure for UART configuration data * @{ */ typedef struct { USART_TypeDef *dev; /**< UART device base register address */ uint32_t rcc_mask; /**< bit in clock enable register */ gpio_t rx_pin; /**< RX pin */ gpio_t tx_pin; /**< TX pin */ gpio_af_t af; /**< alternate pin function to use */ uint8_t bus; /**< APB bus */ uint8_t irqn; /**< IRQ channel */ uint8_t dma_stream; /**< DMA stream used for TX */ uint8_t dma_chan; /**< DMA channel used for TX */ } uart_conf_t; /** @} */ /** * @brief ADC channel configuration data */ typedef struct { gpio_t pin; /**< pin connected to the channel */ uint8_t dev; /**< ADCx - 1 device used for the channel */ uint8_t chan; /**< CPU ADC channel connected to the pin */ } adc_conf_t; /** * @brief DAC line configuration data */ typedef struct { gpio_t pin; /**< pin connected to the line */ uint8_t chan; /**< DAC device used for this line */ } dac_conf_t; /** * @brief Configure the alternate function for the given pin * * @note This is meant for internal use in STM32F4 peripheral drivers only * * @param[in] pin pin to configure * @param[in] af alternate function to use */ void gpio_init_af(gpio_t pin, gpio_af_t af); /** * @brief Power on the DMA device the given stream belongs to * * @param[in] stream logical DMA stream */ static inline void dma_poweron(int stream) { if (stream < 8) { periph_clk_en(AHB1, RCC_AHB1ENR_DMA1EN); } else { periph_clk_en(AHB1, RCC_AHB1ENR_DMA2EN); } } /** * @brief Get DMA base register * * For simplifying DMA stream handling, we map the DMA channels transparently to * one integer number, such that DMA1 stream0 equals 0, DMA2 stream0 equals 8, * DMA2 stream 7 equals 15 and so on. * * @param[in] stream logical DMA stream */ static inline DMA_TypeDef *dma_base(int stream) { return (stream < 8) ? DMA1 : DMA2; } /** * @brief Get the DMA stream base address * * @param[in] stream logical DMA stream * * @return base address for the selected DMA stream */ static inline DMA_Stream_TypeDef *dma_stream(int stream) { uint32_t base = (uint32_t)dma_base(stream); return (DMA_Stream_TypeDef *)(base + (0x10 + (0x18 * (stream & 0x7)))); } /** * @brief Select high or low DMA interrupt register based on stream number * * @param[in] stream logical DMA stream * * @return 0 for streams 0-3, 1 for streams 3-7 */ static inline int dma_hl(int stream) { return ((stream & 0x4) >> 2); } /** * @brief Get the interrupt flag clear bit position in the DMA LIFCR register * * @param[in] stream logical DMA stream */ static inline uint32_t dma_ifc(int stream) { switch (stream & 0x3) { case 0: return (1 << 5); case 1: return (1 << 11); case 2: return (1 << 21); case 3: return (1 << 27); default: return 0; } } static inline void dma_isr_enable(int stream) { if (stream < 7) { NVIC_EnableIRQ((IRQn_Type)((int)DMA1_Stream0_IRQn + stream)); } else if (stream == 7) { NVIC_EnableIRQ(DMA1_Stream7_IRQn); } else if (stream < 13) { NVIC_EnableIRQ((IRQn_Type)((int)DMA2_Stream0_IRQn + (stream - 8))); } else if (stream < 16) { NVIC_EnableIRQ((IRQn_Type)((int)DMA2_Stream5_IRQn + (stream - 13))); } } #ifdef __cplusplus } #endif #endif /* PERIPH_CPU_H */ /** @} */