fb11e647
 vrobic
reseau statique a...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*
* Copyright (C) 2015 Rakendra Thapa <rakendrathapa@gmail.com>
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup cpu_lm4f120
* @{
*
* @file uart.c
* @brief Implementation of the low-level UART driver for the LM4F120
*
* @author Rakendra Thapa <rakendrathapa@gmail.com>
*
* @}
*/
#include <stdint.h>
#include "assert.h"
#include "cpu.h"
#include "periph/uart.h"
#include "periph_conf.h"
/**
* @brief UART device configurations
*/
static uart_isr_ctx_t config[UART_NUMOF];
static int init_base(uart_t uart, uint32_t baudrate);
/**
* Configuring the UART console
*/
int uart_init(uart_t uart, uint32_t baudrate, uart_rx_cb_t rx_cb, void *arg)
{
/* Check the arguments */
assert(uart == 0);
/* Check to make sure the UART peripheral is present */
if(!ROM_SysCtlPeripheralPresent(SYSCTL_PERIPH_UART0)){
return UART_NODEV;
}
int res = init_base(uart, baudrate);
if(res != UART_OK){
return res;
}
/* save callbacks */
config[uart].rx_cb = rx_cb;
config[uart].arg = arg;
/* ulBase = g_ulUARTBase[uart]; */
switch (uart){
#if UART_0_EN
case UART_0:
ROM_UARTTxIntModeSet(UART0_BASE, UART_TXINT_MODE_EOT);
ROM_UARTFIFOLevelSet(UART0_BASE, UART_FIFO_TX4_8, UART_FIFO_RX4_8);
ROM_UARTFIFOEnable(UART0_BASE);
/* Enable the UART interrupt */
NVIC_EnableIRQ(UART_0_IRQ_CHAN);
/* Enable RX interrupt */
UART0_IM_R = UART_IM_RXIM | UART_IM_RTIM;
break;
#endif
#if UART_1_EN
case UART_1:
/* Enable the UART interrupt */
NVIC_EnableIRQ(UART_1_IRQ_CHAN);
break;
#endif
}
return UART_OK;
}
static int init_base(uart_t uart, uint32_t baudrate)
{
switch(uart){
#if UART_0_EN
case UART_0:
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
ROM_GPIOPinConfigure(GPIO_PA0_U0RX);
ROM_GPIOPinConfigure(GPIO_PA1_U0TX);
ROM_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
ROM_UARTDisable(UART0_BASE);
ROM_UARTConfigSetExpClk(UART0_BASE,ROM_SysCtlClockGet(), baudrate,
(UART_CONFIG_PAR_NONE | UART_CONFIG_STOP_ONE |
UART_CONFIG_WLEN_8));
ROM_UARTEnable(UART0_BASE);
break;
#endif
default:
return UART_NODEV;
}
return UART_OK;
}
void uart_write(uart_t uart, const uint8_t *data, size_t len)
{
for (size_t i = 0; i < len; i++) {
ROM_UARTCharPut(UART0_BASE, (char)data[i]);
}
}
void uart_poweron(uart_t uart)
{
ROM_UARTEnable(UART0_BASE);
}
void uart_poweroff(uart_t uart)
{
ROM_UARTDisable(UART0_BASE);
}
/**
* The UART interrupt handler.
*/
void isr_uart0(void)
{
unsigned long ulStatus;
ulStatus = ROM_UARTIntStatus(UART0_BASE, true);
ROM_UARTIntClear(UART0_BASE, ulStatus);
/* Are we interrupted due to a recieved character */
if(ulStatus & (UART_INT_RX | UART_INT_RT))
{
while(ROM_UARTCharsAvail(UART0_BASE))
{
long lchar = ROM_UARTCharGetNonBlocking(UART0_BASE);
config[UART_0].rx_cb(config[UART_0].arg, (uint8_t)lchar);
}
}
cortexm_isr_end();
}
|