fb11e647
 vrobic
reseau statique a...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
|
/*
* Copyright (C) 2008 Freie Universitรคt Berlin
* Copyright (C) 2013 INRIA
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup drivers_cc110x
* @{
*
* @file
* @brief Driver internal constants for CC110x chip configuration
*
* @author Thomas Hillebrandt <hillebra@inf.fu-berlin.de>
* @author Heiko Will <hwill@inf.fu-berlin.de>
* @author Oliver Hahm <oliver.hahm@inria.fr>
*/
#ifndef CC110X_DEFINES_H
#define CC110X_DEFINES_H
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Variable packet length PKTCTRL0 bit configuration
*
* If variable packet length is configured in PKTCTRL0 the
* first byte after the synch word determines the packet length.
*/
#define VARIABLE_PKTLEN (0x01)
/**
* @name Bitmasks for reading out status register values
* @{
*/
/**
* @brief Bitmask (=10000000) for reading CRC_OK.
*
* If CRC_OK == 1: CRC for received data OK (or CRC disabled).
* If CRC_OK == 0: CRC error in received data.
*/
#define CRC_OK (0x80)
/**
* @brief Bitmask (=01111111) for reading LQI_EST.
*
* The Link Quality Indicator estimates how easily a received signal can be demodulated.
*/
#define LQI_EST (0x7F)
#define I_RSSI (0x00) /**< Index 0 contains RSSI information (from optionally appended packet status bytes). */
#define I_LQI (0x01) /**< Index 1 contains LQI & CRC_OK information (from optionally appended packet status bytes). */
#define MARC_STATE (0x1F) /**< Bitmask (=00011111) for reading MARC_STATE in MARCSTATE status register. */
#define PKTSTATUS_CS (0x40) /**< Bitmask (=01000000) for reading CS (Carrier Sense) in PKTSTATUS status register. */
#define PKTSTATUS_PQT_REACHED (0x20) /**< Bitmask (=00100000) for reading PQT_REACHED (Preamble Quality reached) in PKTSTATUS status register. */
#define PKTSTATUS_CCA (0x10) /**< Bitmask (=00010000) for reading CCA (clear channel assessment) in PKTSTATUS status register. */
#define PKTSTATUS_SFD (0x08) /**< Bitmask (=00001000) for reading SFD (Sync word found) in PKTSTATUS status register. */
#define PKTSTATUS_GDO2 (0x04) /**< Bitmask (=00000100) for reading GDO2 (current value on GDO2 pin) in PKTSTATUS status register. */
#define PKTSTATUS_GDO1 (0x02) /**< Bitmask (=00000010) for reading GDO1 (current value on GDO1 pin) in PKTSTATUS status register. */
#define PKTSTATUS_GDO0 (0x01) /**< Bitmask (=00000001) for reading GDO0 (current value on GDO0 pin) in PKTSTATUS status register. */
#define TXFIFO_UNDERFLOW (0x80) /**< Bitmask (=10000000) for reading TXFIFO_UNDERFLOW in TXBYTES status register. */
#define BYTES_IN_TXFIFO (0x7F) /**< Bitmask (=01111111) for reading NUM_TXBYTES in TXBYTES status register. */
#define RXFIFO_OVERFLOW (0x80) /**< Bitmask (=10000000) for reading RXFIFO_OVERFLOW in RXBYTES status register. */
#define BYTES_IN_RXFIFO (0x7F) /**< Bitmask (=01111111) for reading NUM_RXBYTES in RXBYTES status register. */
/** @} */
/**
* @name Bitmasks for reading out configuration register values
* @{
*/
#define PKT_LENGTH_CONFIG (0x03) /**< Bitmask (=00000011) for reading LENGTH_CONFIG in PKTCTRL0 configuration register. */
/** @} */
/**
* @name Definitions to support burst/single access
* @{
*/
#define CC110X_WRITE_BURST (0x40) /**< Offset for burst write. */
#define CC110X_READ_SINGLE (0x80) /**< Offset for read single byte. */
#define CC110X_READ_BURST (0xC0) /**< Offset for read burst. */
#define CC110X_NOBYTE (0xFF) /**< No command (for reading). */
/** @} */
/**
* @name Configuration Registers (47x)
* @{
*/
#define CC110X_IOCFG2 (0x00) /**< GDO2 output pin configuration */
#define CC110X_IOCFG1 (0x01) /**< GDO1 output pin configuration */
#define CC110X_IOCFG0 (0x02) /**< GDO0 output pin configuration */
#define CC110X_FIFOTHR (0x03) /**< RX FIFO and TX FIFO thresholds */
#define CC110X_SYNC1 (0x04) /**< Sync word, high byte */
#define CC110X_SYNC0 (0x05) /**< Sync word, low byte */
#define CC110X_PKTLEN (0x06) /**< Packet length */
#define CC110X_PKTCTRL1 (0x07) /**< Packet automation control */
#define CC110X_PKTCTRL0 (0x08) /**< Packet automation control */
#define CC110X_ADDR (0x09) /**< Device address */
#define CC110X_CHANNR (0x0A) /**< Channel number */
#define CC110X_FSCTRL1 (0x0B) /**< Frequency synthesizer control */
#define CC110X_FSCTRL0 (0x0C) /**< Frequency synthesizer control */
#define CC110X_FREQ2 (0x0D) /**< Frequency control word, high byte */
#define CC110X_FREQ1 (0x0E) /**< Frequency control word, middle byte */
#define CC110X_FREQ0 (0x0F) /**< Frequency control word, low byte */
#define CC110X_MDMCFG4 (0x10) /**< Modem configuration */
#define CC110X_MDMCFG3 (0x11) /**< Modem configuration */
#define CC110X_MDMCFG2 (0x12) /**< Modem configuration */
#define CC110X_MDMCFG1 (0x13) /**< Modem configuration */
#define CC110X_MDMCFG0 (0x14) /**< Modem configuration */
#define CC110X_DEVIATN (0x15) /**< Modem deviation setting */
#define CC110X_MCSM2 (0x16) /**< Main Radio Control State Machine configuration */
#define CC110X_MCSM1 (0x17) /**< Main Radio Control State Machine configuration */
#define CC110X_MCSM0 (0x18) /**< Main Radio Control State Machine configuration */
#define CC110X_FOCCFG (0x19) /**< Frequency Offset Compensation configuration */
#define CC110X_BSCFG (0x1A) /**< Bit Synchronization configuration */
#define CC110X_AGCCTRL2 (0x1B) /**< AGC control */
#define CC110X_AGCCTRL1 (0x1C) /**< AGC control */
#define CC110X_AGCCTRL0 (0x1D) /**< AGC control */
#define CC110X_WOREVT1 (0x1E) /**< High byte Event 0 timeout */
#define CC110X_WOREVT0 (0x1F) /**< Low byte Event 0 timeout */
#define CC110X_WORCTRL (0x20) /**< Wake On Radio control */
#define CC110X_FREND1 (0x21) /**< Front end RX configuration */
#define CC110X_FREND0 (0x22) /**< Front end TX configuration */
#define CC110X_FSCAL3 (0x23) /**< Frequency synthesizer calibration */
#define CC110X_FSCAL2 (0x24) /**< Frequency synthesizer calibration */
#define CC110X_FSCAL1 (0x25) /**< Frequency synthesizer calibration */
#define CC110X_FSCAL0 (0x26) /**< Frequency synthesizer calibration */
#define CC110X_RCCTRL1 (0x27) /**< RC oscillator configuration */
#define CC110X_RCCTRL0 (0x28) /**< RC oscillator configuration */
#define CC110X_FSTEST (0x29) /**< Frequency synthesizer calibration control */
#define CC110X_PTEST (0x2A) /**< Production test */
#define CC110X_AGCTEST (0x2B) /**< AGC test */
#define CC110X_TEST2 (0x2C) /**< Various test settings */
#define CC110X_TEST1 (0x2D) /**< Various test settings */
#define CC110X_TEST0 (0x2E) /**< Various test settings */
/** @} */
/**
* @name Strobe commands (14x)
* @{
*/
#define CC110X_SRES (0x30) /**< Reset chip. */
/**
* @brief Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1).
*
* If in RX/TX: Go to a wait state where only the synthesizer is running (for quick RX / TX turnaround).
*/
#define CC110X_SFSTXON (0x31)
#define CC110X_SXOFF (0x32) /**< Turn off crystal oscillator. */
#define CC110X_SCAL (0x33) /**< Calibrate frequency synthesizer and turn it off (enables quick start). */
#define CC110X_SRX (0x34) /**< Enable RX. Perform calibration first if coming from IDLE and MCSM0.FS_AUTOCAL=1. */
/**
* In IDLE state: Enable TX. Perform calibration first if MCSM0.FS_AUTOCAL=1.
* If in RX state and CCA is enabled: Only go to TX if channel is clear.
*/
#define CC110X_STX (0x35)
#define CC110X_SIDLE (0x36) /**< Exit RX / TX, turn off frequency synthesizer and exit WOR mode if applicable. */
#define CC110X_SAFC (0x37) /**< Perform AFC adjustment of the frequency synthesizer */
#define CC110X_SWOR (0x38) /**< Start automatic RX polling sequence (Wake-on-Radio) */
#define CC110X_SPWD (0x39) /**< Enter power down mode when CSn goes high. */
#define CC110X_SFRX (0x3A) /**< Flush the RX FIFO buffer (CC110X should be in IDLE state). */
#define CC110X_SFTX (0x3B) /**< Flush the TX FIFO buffer (CC110X should be in IDLE state). */
#define CC110X_SWORRST (0x3C) /**< Reset real time clock. */
#define CC110X_SNOP (0x3D) /**< No operation. May be used to pad strobe commands to two bytes for simpler software. */
/** @} */
/**
* @name Status registers (12x)
* @{
*/
#define CC110X_PARTNUM (0x30) /**< Part number of CC110X. */
#define CC110X_VERSION (0x31) /**< Current version number. */
#define CC110X_FREQEST (0x32) /**< Frequency Offset Estimate. */
#define CC110X_LQI (0x33) /**< Demodulator estimate for Link Quality. */
#define CC110X_RSSI (0x34) /**< Received signal strength indication. */
#define CC110X_MARCSTATE (0x35) /**< Control state machine state. */
#define CC110X_WORTIME1 (0x36) /**< High byte of WOR timer. */
#define CC110X_WORTIME0 (0x37) /**< Low byte of WOR timer. */
#define CC110X_PKTSTATUS (0x38) /**< Current GDOx status and packet status. */
#define CC110X_VCO_VC_DAC (0x39) /**< Current setting from PLL calibration module. */
#define CC110X_TXBYTES (0x3A) /**< Underflow and number of bytes in the TX FIFO. */
#define CC110X_RXBYTES (0x3B) /**< Overflow and number of bytes in the RX FIFO. */
/** @} */
/**
* @name Multi byte registers
* @{
*/
/**
* @brief Register for eight user selected output power settings.
*
* 3-bit FREND0.PA_POWER value selects the PATABLE entry to use.
*/
#define CC110X_PATABLE (0x3E)
#define CC110X_TXFIFO (0x3F) /**< TX FIFO: Write operations write to the TX FIFO (SB: +0x00; BURST: +0x40) */
#define CC110X_RXFIFO (0x3F) /**< RX FIFO: Read operations read from the RX FIFO (SB: +0x80; BURST: +0xC0) */
/** @} */
#ifdef __cplusplus
}
#endif
/** @} */
#endif
|