fb11e647
 vrobic
reseau statique a...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*
* Copyright (C) 2015 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_nucleo-f072
* @{
*
* @file
* @brief Peripheral MCU configuration for the nucleo-f072 board
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
* @author José Ignacio Alamos <jialamos@uc.cl>
*/
#ifndef PERIPH_CONF_H_
#define PERIPH_CONF_H_
#include "periph_cpu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Clock system configuration
* @{
*/
#define CLOCK_HSE (8000000U) /* external oscillator */
#define CLOCK_CORECLOCK (48000000U) /* desired core clock frequency */
/* the actual PLL values are automatically generated */
#define CLOCK_PLL_MUL (CLOCK_CORECLOCK / CLOCK_HSE)
/* bus clocks for simplified peripheral initialization, UPDATE MANUALLY! */
#define CLOCK_AHB (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2 (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1 (CLOCK_CORECLOCK / 1)
/** @} */
/**
* @brief Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_NUMOF (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */
/**
* @brief UART configuration
* @}
*/
#define UART_NUMOF (2U)
#define UART_0_EN 1
#define UART_1_EN 1
#define UART_IRQ_PRIO 1
/* UART 0 device configuration */
#define UART_0_DEV USART2
#define UART_0_CLKEN() (periph_clk_en(APB1, RCC_APB1ENR_USART2EN))
#define UART_0_CLKDIS() (periph_clk_dis(APB1, RCC_APB1ENR_USART2EN))
#define UART_0_IRQ USART2_IRQn
#define UART_0_ISR isr_usart2
/* UART 0 pin configuration */
#define UART_0_PORT GPIOA
#define UART_0_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN))
#define UART_0_RX_PIN 3
#define UART_0_TX_PIN 2
#define UART_0_AF 1
/* UART 1 device configuration */
#define UART_1_DEV USART1
#define UART_1_CLKEN() (periph_clk_en(APB2, RCC_APB2ENR_USART1EN))
#define UART_1_CLKDIS() (periph_clk_dis(APB2, RCC_APB2ENR_USART1EN))
#define UART_1_IRQ USART1_IRQn
#define UART_1_ISR isr_usart1
/* UART 1 pin configuration */
#define UART_1_PORT GPIOB
#define UART_1_PORT_CLKEN() (periph_clk_en(AHB, RCC_AHBENR_GPIOBEN))
#define UART_1_RX_PIN 7
#define UART_1_TX_PIN 6
#define UART_1_AF 0
/** @} */
/**
* @brief ADC configuration
* @{
*/
#define ADC_CONFIG { \
{ GPIO_PIN(PORT_A, 0), 0 },\
{ GPIO_PIN(PORT_A, 1), 1 },\
{ GPIO_PIN(PORT_A, 4), 4 },\
{ GPIO_PIN(PORT_B, 0), 8 },\
{ GPIO_PIN(PORT_C, 1), 11 },\
{ GPIO_PIN(PORT_C, 0), 10 } \
}
#define ADC_NUMOF (6)
/** @} */
/**
* @brief DAC configuration
* @{
*/
#define DAC_NUMOF (0)
/** @} */
/**
* @name RTC configuration
* @{
*/
/**
* Nucleos with MB1136 C-02 or MB1136 C-03 -sticker on it have the required LSE
* oscillator provided on the X2 slot.
* See Nucleo User Manual UM1724 section 5.6.2.
*/
#define RTC_NUMOF (1U)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H_ */
/** @} */
|