Design Rule Verification Report

Date:		02/02/2018
Time:		10:05:03
Elapsed Time:		00:00:00
Filename:		C:\Users\maria\Downloads\bigfiles_v2\Carte_pollution.PcbDoc

Warnings:		0
Rule Violations:		171

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=0.2mm) (All),(All)	1
Clearance Constraint (Gap=0.4mm) (InPolygon),((InNetClass('All Nets')))	0
Clearance Constraint (Gap=0.8mm) (InPolygon),((InNet('NetANT_GPS_1')) or (InNet('NetANT_LORA_1')) or (InNet('NetGPS_3')) or (InNet('NetC17_1')))	0
Short-Circuit Constraint (Allowed=No) (All),(All)	1
Un-Routed Net Constraint ( (All) )	0
Modified Polygon (Allow modified: No), (Allow shelved: No)	0
Width Constraint (Min=0.203mm) (Max=6.452mm) (Preferred=0.406mm) (All)	0
Power Plane Connect Rule(Relief Connect )(Expansion=0.3mm) (Conductor Width=0.3mm) (Air Gap=0.3mm) (Entries=4) (All)	0
Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All)	4
Hole To Hole Clearance (Gap=0.254mm) (All),(All)	0
Minimum Solder Mask Sliver (Gap=0.254mm) (All),(All)	103
Silk To Solder Mask (Clearance=0.254mm) (IsPad),(All)	47
Silk to Silk (Clearance=0.254mm) (All),(All)	15
Net Antennae (Tolerance=0mm) (All)	0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)	0
Total	171

Clearance Constraint (Gap=0.2mm) (All),(All)
Clearance Constraint: (0.195mm < 0.2mm) Between Pad USB-1(131.348mm,123.908mm) on Bottom Layer And Pad USB-5(132.508mm,124.268mm) on Bottom Layer

Short-Circuit Constraint (Allowed=No) (All),(All)
Short-Circuit Constraint: Between Area Fill (99.745mm,59.227mm) (100.245mm,64.327mm) on Bottom Layer And Pad ANT_LORA-2(96.545mm,62.027mm) on Bottom Layer Location : [X = 97.445mm][Y = 61.777mm]

Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All)
Hole Size Constraint: (3mm > 2.54mm) Via (128.473mm,64.287mm) from Top Layer to Bottom Layer Actual Hole Size = 3mm
Hole Size Constraint: (3mm > 2.54mm) Via (146.583mm,123.596mm) from Top Layer to Bottom Layer Actual Hole Size = 3mm
Hole Size Constraint: (3mm > 2.54mm) Via (185.166mm,64.287mm) from Top Layer to Bottom Layer Actual Hole Size = 3mm
Hole Size Constraint: (3mm > 2.54mm) Via (92.481mm,123.596mm) from Top Layer to Bottom Layer Actual Hole Size = 3mm

Minimum Solder Mask Sliver (Gap=0.254mm) (All),(All)
Minimum Solder Mask Sliver Constraint: (0.197mm < 0.254mm) Between Pad ANT_GPS-1(183.45mm,124.841mm) on Bottom Layer And Pad ANT_GPS-NC(183.45mm,122.901mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.197mm]
Minimum Solder Mask Sliver Constraint: (0.197mm < 0.254mm) Between Pad ANT_GPS-NC(187.35mm,122.901mm) on Bottom Layer And Pad ANT_GPS-NC(187.35mm,124.841mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.197mm]
Minimum Solder Mask Sliver Constraint: (0.047mm < 0.254mm) Between Pad BUF-1(159.425mm,82.109mm) on Bottom Layer And Pad BUF-2(158.775mm,82.109mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.047mm]
Minimum Solder Mask Sliver Constraint: (0.047mm < 0.254mm) Between Pad BUF-2(158.775mm,82.109mm) on Bottom Layer And Pad BUF-3(158.125mm,82.109mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.047mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C10-1(144.374mm,113.148mm) on Bottom Layer And Pad C10-2(144.374mm,114.598mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C1-1(122.961mm,84.136mm) on Bottom Layer And Pad C1-2(122.961mm,85.586mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C11-1(139.28mm,101.879mm) on Bottom Layer And Pad C11-2(140.73mm,101.879mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C12-1(142.113mm,96.901mm) on Bottom Layer And Pad C12-2(140.663mm,96.901mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C13-1(172.339mm,114.87mm) on Bottom Layer And Pad C13-2(172.339mm,116.32mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C14-1(162.054mm,108.712mm) on Bottom Layer And Pad C14-2(160.604mm,108.712mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C15-1(165.876mm,108.661mm) on Bottom Layer And Pad C15-2(164.426mm,108.661mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C16-1(159.842mm,114.062mm) on Bottom Layer And Pad C16-2(159.842mm,115.512mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C17-1(96.913mm,89.611mm) on Bottom Layer And Pad C17-2(98.363mm,89.611mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C18-1(98.337mm,84.074mm) on Bottom Layer And Pad C18-2(96.887mm,84.074mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C20-1(155.372mm,113.386mm) on Bottom Layer And Pad C20-2(155.372mm,114.836mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C3-1(110.949mm,82.626mm) on Bottom Layer And Pad C3-2(109.499mm,82.626mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C4-1(117.928mm,112.346mm) on Bottom Layer And Pad C4-2(117.928mm,110.896mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C5-1(152.255mm,82.829mm) on Bottom Layer And Pad C5-2(153.705mm,82.829mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C6-1(127.799mm,83.795mm) on Bottom Layer And Pad C6-2(129.249mm,83.795mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C7-1(170.002mm,77.71mm) on Bottom Layer And Pad C7-2(170.002mm,79.16mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C8-1(174.879mm,114.896mm) on Bottom Layer And Pad C8-2(174.879mm,116.346mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad C9-1(138.303mm,117.602mm) on Bottom Layer And Pad C9-2(136.853mm,117.602mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-1(115.037mm,124.866mm) on Bottom Layer And Pad LORA-2(115.037mm,123.596mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-10(115.037mm,113.436mm) on Bottom Layer And Pad LORA-11(115.037mm,112.166mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-10(115.037mm,113.436mm) on Bottom Layer And Pad LORA-9(115.037mm,114.706mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-11(115.037mm,112.166mm) on Bottom Layer And Pad LORA-12(115.037mm,110.896mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-12(115.037mm,110.896mm) on Bottom Layer And Pad LORA-13(115.037mm,109.626mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-13(115.037mm,109.626mm) on Bottom Layer And Pad LORA-14(115.037mm,108.356mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-14(115.037mm,108.356mm) on Bottom Layer And Pad LORA-15(115.037mm,107.086mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-15(115.037mm,107.086mm) on Bottom Layer And Pad LORA-16(115.037mm,105.816mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-16(115.037mm,105.816mm) on Bottom Layer And Pad LORA-17(115.037mm,104.546mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-17(115.037mm,104.546mm) on Bottom Layer And Pad LORA-18(115.037mm,103.276mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-18(115.037mm,103.276mm) on Bottom Layer And Pad LORA-19(115.037mm,102.006mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-19(115.037mm,102.006mm) on Bottom Layer And Pad LORA-20(115.037mm,100.736mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-2(115.037mm,123.596mm) on Bottom Layer And Pad LORA-3(115.037mm,122.326mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-21(109.957mm,99.466mm) on Bottom Layer And Pad LORA-22(108.687mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-22(108.687mm,99.466mm) on Bottom Layer And Pad LORA-23(107.417mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-23(107.417mm,99.466mm) on Bottom Layer And Pad LORA-24(106.147mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-24(106.147mm,99.466mm) on Bottom Layer And Pad LORA-25(104.877mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-25(104.877mm,99.466mm) on Bottom Layer And Pad LORA-26(103.607mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-26(103.607mm,99.466mm) on Bottom Layer And Pad LORA-27(102.337mm,99.466mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-28(97.257mm,100.736mm) on Bottom Layer And Pad LORA-29(97.257mm,102.006mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-29(97.257mm,102.006mm) on Bottom Layer And Pad LORA-30(97.257mm,103.276mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-3(115.037mm,122.326mm) on Bottom Layer And Pad LORA-4(115.037mm,121.056mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-30(97.257mm,103.276mm) on Bottom Layer And Pad LORA-31(97.257mm,104.546mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-31(97.257mm,104.546mm) on Bottom Layer And Pad LORA-32(97.257mm,105.816mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-32(97.257mm,105.816mm) on Bottom Layer And Pad LORA-33(97.257mm,107.086mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-33(97.257mm,107.086mm) on Bottom Layer And Pad LORA-34(97.257mm,108.356mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-34(97.257mm,108.356mm) on Bottom Layer And Pad LORA-35(97.257mm,109.626mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-35(97.257mm,109.626mm) on Bottom Layer And Pad LORA-36(97.257mm,110.896mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-36(97.257mm,110.896mm) on Bottom Layer And Pad LORA-37(97.257mm,112.166mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-37(97.257mm,112.166mm) on Bottom Layer And Pad LORA-38(97.257mm,113.436mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-38(97.257mm,113.436mm) on Bottom Layer And Pad LORA-39(97.257mm,114.706mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-39(97.257mm,114.706mm) on Bottom Layer And Pad LORA-40(97.257mm,115.976mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-4(115.037mm,121.056mm) on Bottom Layer And Pad LORA-5(115.037mm,119.786mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-40(97.257mm,115.976mm) on Bottom Layer And Pad LORA-41(97.257mm,117.246mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-41(97.257mm,117.246mm) on Bottom Layer And Pad LORA-42(97.257mm,118.516mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-42(97.257mm,118.516mm) on Bottom Layer And Pad LORA-43(97.257mm,119.786mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-43(97.257mm,119.786mm) on Bottom Layer And Pad LORA-44(97.257mm,121.056mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-44(97.257mm,121.056mm) on Bottom Layer And Pad LORA-45(97.257mm,122.326mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-45(97.257mm,122.326mm) on Bottom Layer And Pad LORA-46(97.257mm,123.596mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-46(97.257mm,123.596mm) on Bottom Layer And Pad LORA-47(97.257mm,124.866mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-5(115.037mm,119.786mm) on Bottom Layer And Pad LORA-6(115.037mm,118.516mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-6(115.037mm,118.516mm) on Bottom Layer And Pad LORA-7(115.037mm,117.246mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-7(115.037mm,117.246mm) on Bottom Layer And Pad LORA-8(115.037mm,115.976mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.054mm < 0.254mm) Between Pad LORA-8(115.037mm,115.976mm) on Bottom Layer And Pad LORA-9(115.037mm,114.706mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.054mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad POWER_IN-1(136.347mm,120.472mm) on Multi-Layer And Pad POWER_IN-2(138.887mm,120.472mm) on Multi-Layer [Top Solder] Mask Sliver [0.247mm] / [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R10-1(140.325mm,109.576mm) on Bottom Layer And Pad R10-2(139.125mm,109.576mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R1-1(110.75mm,85.192mm) on Bottom Layer And Pad R1-2(109.55mm,85.192mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R11-1(169.951mm,110.144mm) on Bottom Layer And Pad R11-2(169.951mm,111.344mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R2-1(135.966mm,76.267mm) on Bottom Layer And Pad R2-2(135.966mm,75.067mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R3-1(139.049mm,79.654mm) on Bottom Layer And Pad R3-2(140.249mm,79.654mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R4-1(172.796mm,79.207mm) on Bottom Layer And Pad R4-2(172.796mm,80.407mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R5-1(140.919mm,103.591mm) on Bottom Layer And Pad R5-2(140.919mm,104.791mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R6-1(143.18mm,89.316mm) on Bottom Layer And Pad R6-2(143.18mm,90.516mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R7-1(153.619mm,76.632mm) on Bottom Layer And Pad R7-2(153.619mm,77.832mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R8-1(167.081mm,80.356mm) on Bottom Layer And Pad R8-2(167.081mm,79.156mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad R9-1(135.728mm,111.735mm) on Bottom Layer And Pad R9-2(134.528mm,111.735mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.097mm < 0.254mm) Between Pad REG-1(138.328mm,114.808mm) on Bottom Layer And Pad REG-2(139.278mm,114.808mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.097mm]
Minimum Solder Mask Sliver Constraint: (0.097mm < 0.254mm) Between Pad REG-2(139.278mm,114.808mm) on Bottom Layer And Pad REG-3(140.228mm,114.808mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.097mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-1(138.201mm,99.517mm) on Bottom Layer And Pad TILE-2(138.201mm,98.247mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-10(124.701mm,89.357mm) on Bottom Layer And Pad TILE-11(124.701mm,90.627mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-11(124.701mm,90.627mm) on Bottom Layer And Pad TILE-12(124.701mm,91.897mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-12(124.701mm,91.897mm) on Bottom Layer And Pad TILE-13(124.701mm,93.167mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-13(124.701mm,93.167mm) on Bottom Layer And Pad TILE-14(124.701mm,94.437mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-14(124.701mm,94.437mm) on Bottom Layer And Pad TILE-15(124.701mm,95.707mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-15(124.701mm,95.707mm) on Bottom Layer And Pad TILE-16(124.701mm,96.977mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-16(124.701mm,96.977mm) on Bottom Layer And Pad TILE-17(124.701mm,98.247mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-17(124.701mm,98.247mm) on Bottom Layer And Pad TILE-18(124.701mm,99.517mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-2(138.201mm,98.247mm) on Bottom Layer And Pad TILE-3(138.201mm,96.977mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-3(138.201mm,96.977mm) on Bottom Layer And Pad TILE-4(138.201mm,95.707mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-4(138.201mm,95.707mm) on Bottom Layer And Pad TILE-5(138.201mm,94.437mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-5(138.201mm,94.437mm) on Bottom Layer And Pad TILE-6(138.201mm,93.167mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-6(138.201mm,93.167mm) on Bottom Layer And Pad TILE-7(138.201mm,91.897mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-7(138.201mm,91.897mm) on Bottom Layer And Pad TILE-8(138.201mm,90.627mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.178mm < 0.254mm) Between Pad TILE-8(138.201mm,90.627mm) on Bottom Layer And Pad TILE-9(138.201mm,89.357mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.178mm]
Minimum Solder Mask Sliver Constraint: (0.247mm < 0.254mm) Between Pad USB_D-1(125.044mm,117.5mm) on Multi-Layer And Pad USB_D-2(127.584mm,117.5mm) on Multi-Layer [Top Solder] Mask Sliver [0.247mm] / [Bottom Solder] Mask Sliver [0.247mm]
Minimum Solder Mask Sliver Constraint: (0.097mm < 0.254mm) Between Pad USB-5(127.138mm,126.568mm) on Bottom Layer And Pad USB-5(127.588mm,124.268mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.097mm]
Minimum Solder Mask Sliver Constraint: (0.087mm < 0.254mm) Between Pad USB-5(127.138mm,126.568mm) on Bottom Layer And Pad USB-5(129.208mm,126.568mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.087mm]
Minimum Solder Mask Sliver Constraint: (0.13mm < 0.254mm) Between Pad USB-5(127.588mm,124.268mm) on Bottom Layer And Pad USB-5(129.208mm,126.568mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.13mm]
Minimum Solder Mask Sliver Constraint: (0.13mm < 0.254mm) Between Pad USB-5(130.888mm,126.568mm) on Bottom Layer And Pad USB-5(132.508mm,124.268mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.13mm]
Minimum Solder Mask Sliver Constraint: (0.225mm < 0.254mm) Between Pad USB-5(130.888mm,126.568mm) on Bottom Layer And Pad USB-5(133.096mm,126.568mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.225mm]
Minimum Solder Mask Sliver Constraint: (0.097mm < 0.254mm) Between Pad USB-5(132.508mm,124.268mm) on Bottom Layer And Pad USB-5(133.096mm,126.568mm) on Bottom Layer [Bottom Solder] Mask Sliver [0.097mm]

Silk To Solder Mask (Clearance=0.254mm) (IsPad),(All)
Silk To Solder Mask Clearance Constraint: (0.178mm < 0.254mm) Between Arc (138.582mm,101.93mm) on Bottom Overlay And Pad C11-1(139.28mm,101.879mm) on Bottom Layer [Bottom Overlay] to [Bottom Solder] clearance [0.178mm]
Silk To Solder Mask Clearance Constraint: (0.2mm < 0.254mm) Between Arc (144.167mm,83.279mm) on Bottom Overlay And Pad LED-2(143.205mm,84.091mm) on Bottom Layer [Bottom Overlay] to [Bottom Solder] clearance [0.2mm]
Silk To Solder Mask Clearance Constraint: (0.2mm < 0.254mm) Between Arc (166.016mm,104.4mm) on Bottom Overlay And Pad LED_GPS-2(166.953mm,105.562mm) on Bottom Layer [Bottom Overlay] to [Bottom Solder] clearance [0.2mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C1-1(122.961mm,84.136mm) on Bottom Layer And Text "X1" (123.977mm,85.36mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C1-2(122.961mm,85.586mm) on Bottom Layer And Text "X1" (123.977mm,85.36mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C16-1(159.842mm,114.062mm) on Bottom Layer And Text "L2" (162.89mm,113.538mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C16-2(159.842mm,115.512mm) on Bottom Layer And Text "L2" (162.89mm,113.538mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (0.162mm < 0.254mm) Between Pad C17-2(98.363mm,89.611mm) on Bottom Layer And Text "L6" (101.041mm,87.249mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.162mm]
Silk To Solder Mask Clearance Constraint: (0.13mm < 0.254mm) Between Pad C2-L+(120.777mm,77.064mm) on Multi-Layer And Text "RTC" (120.303mm,75.54mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.13mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C9-1(138.303mm,117.602mm) on Bottom Layer And Text "REG" (141.326mm,116.23mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad C9-2(136.853mm,117.602mm) on Bottom Layer And Text "REG" (141.326mm,116.23mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad GPS_OUT-1(154.178mm,117.856mm) on Multi-Layer And Text "C20" (156.185mm,116.598mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (0.006mm < 0.254mm) Between Pad GPS-10(164.249mm,114.427mm) on Bottom Layer And Text "L3" (164.922mm,113.556mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.006mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad GPS-9(162.399mm,114.427mm) on Bottom Layer And Text "L2" (162.89mm,113.538mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad GPS-9(162.399mm,114.427mm) on Bottom Layer And Text "L3" (164.922mm,113.556mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad HUM-4(128.515mm,80.999mm) on Bottom Layer And Text "HUM" (131.75mm,79.172mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad HUM-5(129.515mm,80.999mm) on Bottom Layer And Text "HUM" (131.75mm,79.172mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad HUM-6(130.515mm,80.999mm) on Bottom Layer And Text "HUM" (131.75mm,79.172mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad HUM-7(129.515mm,79.654mm) on Bottom Layer And Text "HUM" (131.75mm,79.172mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad L3-1(164.313mm,112.038mm) on Bottom Layer And Text "C15" (168.58mm,110.109mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad L3-2(164.313mm,110.808mm) on Bottom Layer And Text "C15" (168.58mm,110.109mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (0.021mm < 0.254mm) Between Pad POLL_UART-1(158.496mm,86.716mm) on Multi-Layer And Text "BUF" (160.172mm,85.369mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.021mm]
Silk To Solder Mask Clearance Constraint: (0.133mm < 0.254mm) Between Pad POLL_UART-3(161.036mm,86.716mm) on Multi-Layer And Text "BUF" (160.172mm,85.369mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.133mm]
Silk To Solder Mask Clearance Constraint: (0.217mm < 0.254mm) Between Pad POLLUTION-3(156.159mm,79.959mm) on Multi-Layer And Text "R7" (155.067mm,76.606mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.217mm]
Silk To Solder Mask Clearance Constraint: (0.069mm < 0.254mm) Between Pad R11-2(169.951mm,111.344mm) on Bottom Layer And Text "C13" (174.219mm,111.709mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.069mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad R5-1(140.919mm,103.591mm) on Bottom Layer And Text "C11" (141.478mm,103.708mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad R5-2(140.919mm,104.791mm) on Bottom Layer And Text "C11" (141.478mm,103.708mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-1(138.201mm,99.517mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-10(124.701mm,89.357mm) on Bottom Layer And Track (124.689mm,87.833mm)(124.689mm,93.008mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-11(124.701mm,90.627mm) on Bottom Layer And Track (124.689mm,87.833mm)(124.689mm,93.008mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-12(124.701mm,91.897mm) on Bottom Layer And Track (124.689mm,87.833mm)(124.689mm,93.008mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (0.096mm < 0.254mm) Between Pad TILE-13(124.701mm,93.167mm) on Bottom Layer And Track (124.689mm,87.833mm)(124.689mm,93.008mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0.096mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-13(124.701mm,93.167mm) on Bottom Layer And Track (124.689mm,93.008mm)(124.689mm,95.866mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-14(124.701mm,94.437mm) on Bottom Layer And Track (124.689mm,93.008mm)(124.689mm,95.866mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-15(124.701mm,95.707mm) on Bottom Layer And Track (124.689mm,93.008mm)(124.689mm,95.866mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-15(124.701mm,95.707mm) on Bottom Layer And Track (124.689mm,95.866mm)(124.689mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-16(124.701mm,96.977mm) on Bottom Layer And Track (124.689mm,95.866mm)(124.689mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-17(124.701mm,98.247mm) on Bottom Layer And Track (124.689mm,95.866mm)(124.689mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-18(124.701mm,99.517mm) on Bottom Layer And Track (124.689mm,95.866mm)(124.689mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-2(138.201mm,98.247mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-3(138.201mm,96.977mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-4(138.201mm,95.707mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-5(138.201mm,94.437mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-6(138.201mm,93.167mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-7(138.201mm,91.897mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-8(138.201mm,90.627mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]
Silk To Solder Mask Clearance Constraint: (Collision < 0.254mm) Between Pad TILE-9(138.201mm,89.357mm) on Bottom Layer And Track (138.201mm,87.833mm)(138.201mm,101.676mm) on Bottom Overlay [Bottom Overlay] to [Bottom Solder] clearance [0mm]

Silk to Silk (Clearance=0.254mm) (All),(All)
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Arc (120.777mm,74.564mm) on Top Overlay And Text "RTC_I2C" (102.438mm,74.193mm) on Top Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Arc (170.902mm,85.461mm) on Bottom Overlay And Text "CUR3.3" (171.679mm,85.649mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "C11" (141.478mm,103.708mm) on Bottom Overlay And Text "TILE" (138.632mm,102.997mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (0.23mm < 0.254mm) Between Text "C16" (160.477mm,117.272mm) on Bottom Overlay And Text "C20" (156.185mm,116.598mm) on Bottom Overlay Silk Text to Silk Clearance [0.23mm]
Silk To Silk Clearance Constraint: (0.136mm < 0.254mm) Between Text "C3" (114.462mm,82.677mm) on Bottom Overlay And Track (114.554mm,77.51mm)(114.554mm,82.51mm) on Bottom Overlay Silk Text to Silk Clearance [0.136mm]
Silk To Silk Clearance Constraint: (0.136mm < 0.254mm) Between Text "C3" (114.462mm,82.677mm) on Bottom Overlay And Track (114.554mm,82.51mm)(117.754mm,82.51mm) on Bottom Overlay Silk Text to Silk Clearance [0.136mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "C9" (139.635mm,115.976mm) on Bottom Overlay And Text "REG" (141.326mm,116.23mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "CUR3.3" (171.679mm,85.649mm) on Bottom Overlay And Track (166.802mm,84.461mm)(166.802mm,88.161mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "CUR3.3" (171.679mm,85.649mm) on Bottom Overlay And Track (171.902mm,84.461mm)(171.902mm,88.161mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "HUM" (131.75mm,79.172mm) on Bottom Overlay And Track (127.815mm,80.699mm)(127.815mm,81.354mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (0.253mm < 0.254mm) Between Text "HUM" (131.75mm,79.172mm) on Bottom Overlay And Track (131.215mm,80.699mm)(131.215mm,81.354mm) on Bottom Overlay Silk Text to Silk Clearance [0.253mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "L2" (162.89mm,113.538mm) on Bottom Overlay And Text "L3" (164.922mm,113.556mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (Collision < 0.254mm) Between Text "R10" (141.503mm,106.832mm) on Bottom Overlay And Text "R5" (142.367mm,106.655mm) on Bottom Overlay Silk Text to Silk Clearance [0mm]
Silk To Silk Clearance Constraint: (0.22mm < 0.254mm) Between Text "RTC" (120.303mm,75.54mm) on Bottom Overlay And Track (114.554mm,77.51mm)(117.754mm,77.51mm) on Bottom Overlay Silk Text to Silk Clearance [0.22mm]
Silk To Silk Clearance Constraint: (0.22mm < 0.254mm) Between Text "RTC" (120.303mm,75.54mm) on Bottom Overlay And Track (117.754mm,77.51mm)(117.754mm,82.51mm) on Bottom Overlay Silk Text to Silk Clearance [0.22mm]