Blame view

README.md 1.75 KB
73408d11   Thomas Telkamp   Initial commit
1
2
3
4
5
6
  Single Channel LoRaWAN Gateway
  ==============================
  This repository contains a proof-of-concept implementation of a single
  channel LoRaWAN gateway.
  
  It has been tested on the Raspberry Pi platform, using a Semtech SX1272
ee67b5ae   Thomas Telkamp   Support for SX127...
7
  transceiver (HopeRF RFM92W), and SX1276 (HopeRF RFM95W).
73408d11   Thomas Telkamp   Initial commit
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
  
  The code is for testing and development purposes only, and is not meant 
  for production usage. 
  
  Part of the source has been copied from the Semtech Packet Forwarder 
  (with permission).
  
  Maintainer: Thomas Telkamp <thomas@telkamp.eu>
  
  Features
  --------
  - listen on configurable frequency and spreading factor
  - SF7 to SF12
  - status updates
  - can forward to two servers
  
  Not (yet) supported:
  - PACKET_PUSH_ACK processing
73408d11   Thomas Telkamp   Initial commit
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
  - SF7BW250 modulation
  - FSK modulation
  - downstream messages (tx)
  
  Dependencies
  ------------
  - SPI needs to be enabled on the Raspberry Pi (use raspi-config)
  - WiringPi: a GPIO access library written in C for the BCM2835 
    used in the Raspberry Pi.
    sudo apt-get install wiringpi
    see http://wiringpi.com
  - Run packet forwarder as root
  
  Connections
  -----------
  SX1272 - Raspberry
  
  3.3V   - 3.3V (header pin #1) 
  GND	   - GND (pin #6)
  MISO   - MISO (pin #21)
  MOSI   - MOSI (pin #19)
  SCK    - CLK (pin #23)
  NSS    - GPIO6 (pin #22)
  DIO0   - GPIO7 (pin #7)
ee67b5ae   Thomas Telkamp   Support for SX127...
50
  RST    - GPIO0 (pin #11)
73408d11   Thomas Telkamp   Initial commit
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
  
  Configuration
  -------------
  
  Defaults:
  
  - LoRa:   SF7 at 868.1 Mhz
  - Server: 54.229.214.112, port 1700  (The Things Network: croft.thethings.girovito.nl)
  
  Edit source node (main.cpp) to change configuration (look for: "Configure these values!").
  
  Please set location, email and description.
  
  License
  -------
  The source files in this repository are made available under the Eclipse
  Public License v1.0, except for the base64 implementation, that has been
  copied from the Semtech Packet Forwader.