Blame view

src/lufa-LUFA-170418/Projects/TempDataLogger/TemperatureDataLogger.txt 3.3 KB
ca85a266   gperson   le vrai commit, c...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
  /** \file
   *
   *  This file contains special DoxyGen information for the generation of the main page and other special
   *  documentation pages. It is not a project source file.
   */
  
  /** \mainpage Temperature Datalogger Project
   *
   *  \section Sec_Compat Demo Compatibility:
   *
   *  The following list indicates what microcontrollers are compatible with this demo.
   *
   *  \li Series 7 USB AVRs (AT90USBxxx7)
   *  \li Series 6 USB AVRs (AT90USBxxx6)
   *  \li Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
   *
   *  \section Sec_Info USB Information:
   *
   *  The following table gives a rundown of the USB utilization of this demo.
   *
   *  <table>
   *   <tr>
   *    <td><b>USB Mode:</b></td>
   *    <td>Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Classes:</b></td>
   *    <td>Mass Storage Device \n
   *        Human Interface Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Subclasses:</b></td>
   *    <td>Bulk-Only Transport \n
   *        Keyboard Subclass</td>
   *   </tr>
   *   <tr>
   *    <td><b>Relevant Standards:</b></td>
   *    <td>USBIF Mass Storage Standard \n
   *        USB Bulk-Only Transport Standard \n
   *        SCSI Primary Commands Specification \n
   *        SCSI Block Commands Specification \n
   *        USBIF HID Specification, USBIF HID Usage Tables</td>
   *   </tr>
   *   <tr>
   *    <td><b>Supported USB Speeds:</b></td>
   *    <td>Full Speed Mode</td>
   *   </tr>
   *  </table>
   *
   *  \section Sec_Description Project Description:
   *
   *  Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
   *  the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
   *  each time a specified interval elapses. When inserted into a PC, the datalogger will appear as a standard USB Mass Storage
   *  device with a single text file, which contains the logged data. Files are named according to the current date when the
   *  logging commences.
   *
   *  A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the
   *  sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token
   *  is specified - see \ref Sec_Options.
   *
   *  Due to the host's need for exclusive access to the file system, the device will not log samples while connected to a host.
   *  For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT file system.
   *
   *  This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library
   *  LibHIDNet (http://sourceforge.net/projects/libhidnet/).
   *
   *  \section Sec_Options Project Options
   *
   *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
   *
   *  <table>
   *   <tr>
   *    <th><b>Define Name:</b></th>
   *    <th><b>Location:</b></th>
   *    <th><b>Description:</b></th>
   *   </tr>
   *   <tr>
   *    <td>DUMMY_RTC</td>
   *    <td>AppConfig.h</td>
   *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo use a dummy software RTC using the system
   *        clock. This is less accurate and does not store the set time and date into non-volatile memory.</td>
   *   </tr>
   *  </table>
   */