Blame view

src/lufa-LUFA-170418/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt 3.18 KB
ca85a266   gperson   le vrai commit, c...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
  /** \file
   *
   *  This file contains special DoxyGen information for the generation of the main page and other special
   *  documentation pages. It is not a project source file.
   */
  
  /** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
   *
   *  \section Sec_Compat Demo Compatibility:
   *
   *  The following list indicates what microcontrollers are compatible with this demo.
   *
   *  \li Series 7 USB AVRs (AT90USBxxx7)
   *  \li Series 6 USB AVRs (AT90USBxxx6)
   *  \li Series 4 USB AVRs (ATMEGAxxU4)
   *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
   *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
   *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
   *
   *  \section Sec_Info USB Information:
   *
   *  The following table gives a rundown of the USB utilization of this demo.
   *
   *  <table>
   *   <tr>
   *    <td><b>USB Mode:</b></td>
   *    <td>Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Class:</b></td>
   *    <td>Communications Device Class (CDC) \n
   *        Mass Storage Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Subclass:</b></td>
   *    <td>Abstract Control Model (ACM) \n
   *        Bulk-Only Transport</td>
   *   </tr>
   *   <tr>
   *    <td><b>Relevant Standards:</b></td>
   *    <td>USBIF CDC Class Standard \n
   *        USBIF Mass Storage Standard \n
   *        USB Bulk-Only Transport Standard \n
   *        SCSI Primary Commands Specification \n
   *        SCSI Block Commands Specification</td>
   *   </tr>
   *   <tr>
   *    <td><b>Supported USB Speeds:</b></td>
   *    <td>Full Speed Mode</td>
   *   </tr>
   *  </table>
   *
   *  \section Sec_Description Project Description:
   *
   *  Combined Communications Device Class/Mass Storage demonstration application.
   *  This gives a simple reference application for implementing a combined
   *  CDC and Mass Storage device acting as a both a virtual serial port and a flash
   *  drive. Joystick actions are transmitted to the host as strings, and data can be
   *  written to or read from the exposed flash drive interface in the same manner as
   *  other USB flash drives. The device does not respond to serial data sent from the
   *  host.
   *
   *  After running this demo for the first time on a new computer,
   *  you will need to supply the .INF file located in this demo
   *  project's directory as the device's driver when running under
   *  Windows. This will enable Windows to use its inbuilt CDC drivers,
   *  negating the need for custom drivers for the device. Other
   *  Operating Systems should automatically use their own inbuilt
   *  CDC-ACM drivers.
   *
   *  \section Sec_Options Project Options
   *
   *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
   *
   *  <table>
   *   <tr>
   *    <th><b>Define Name:</b></th>
   *    <th><b>Location:</b></th>
   *    <th><b>Description:</b></th>
   *   </tr>
   *   <tr>
   *    <td>TOTAL_LUNS</td>
   *    <td>AppConfig.h</td>
   *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
   *        this can be set to any positive non-zero amount.</td>
   *   </tr>
   *   <tr>
   *    <td>DISK_READ_ONLY</td>
   *    <td>AppConfig.h</td>
   *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
   *   </tr>
   */