Blame view

src/lufa-LUFA-170418/Demos/Device/ClassDriver/AudioInput/AudioInput.txt 2.96 KB
ca85a266   gperson   le vrai commit, c...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
  /** \file
   *
   *  This file contains special DoxyGen information for the generation of the main page and other special
   *  documentation pages. It is not a project source file.
   */
  
  /** \mainpage Audio Input Device Demo
   *
   *  \section Sec_Compat Demo Compatibility:
   *
   *  The following list indicates what microcontrollers are compatible with this demo.
   *
   *  \li Series 7 USB AVRs (AT90USBxxx7)
   *  \li Series 6 USB AVRs (AT90USBxxx6)
   *  \li Series 4 USB AVRs (ATMEGAxxU4)
   *
   *  \section Sec_Info USB Information:
   *
   *  The following table gives a rundown of the USB utilization of this demo.
   *
   *  <table>
   *   <tr>
   *    <td><b>USB Mode:</b></td>
   *    <td>Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Class:</b></td>
   *    <td>Audio Class</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Subclass:</b></td>
   *    <td>Standard Audio Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>Relevant Standards:</b></td>
   *    <td>USBIF Audio 1.0 Class Specification \n
   *        USBIF Audio 1.0 Class Terminal Types Specification \n
   *        USBIF Audio 1.0 Data Formats Specification</td>
   *   </tr>
   *   <tr>
   *    <td><b>Supported USB Speeds:</b></td>
   *    <td>Full Speed Mode</td>
   *   </tr>
   *  </table>
   *
   *  \section Sec_Description Project Description:
   *
   *  Audio demonstration application. This gives a simple reference
   *  application for implementing a USB Audio Input device using the
   *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
   *  required).
   *
   *  On start-up the system will automatically enumerate and function as a
   *  USB microphone. By default, the demo will produce a square wave test tone
   *  when the board button is pressed. If USE_TEST_TONE is not defined in the
   *  project makefile, incoming audio from the ADC channel 1 will be sampled
   *  and sent to the host computer instead.
   *
   *  When in microphone mode, connect a microphone to the ADC channel 2.
   *
   *  Under Windows, if a driver request dialogue pops up, select the option
   *  to automatically install the appropriate drivers.
   *
   *  \section Sec_Options Project Options
   *
   *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
   *
   *  <table>
   *   <tr>
   *    <th><b>Define Name:</b></th>
   *    <th><b>Location:</b></th>
   *    <th><b>Description:</b></th>
   *   </tr>
   *   <tr>
   *    <td>MIC_IN_ADC_CHANNEL</td>
   *    <td>AppConfig.h</td>
   *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
   *   </tr>
   *   <tr>
   *    <td>USE_TEST_TONE</td>
   *    <td>AppConfig.h</td>
   *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
   *        instead of sampling the board microphone.</td>
   *   </tr>
   *   <tr>
   *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
   *    <td>AppConfig.h</td>
   *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
   *   </tr>
   *  </table>
   */