Blame view

src/lufa-LUFA-170418/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt 1.93 KB
ca85a266   gperson   le vrai commit, c...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
  /** \file
   *
   *  This file contains special DoxyGen information for the generation of the main page and other special
   *  documentation pages. It is not a project source file.
   */
  
  /** \mainpage Mass Storage Host Demo
   *
   *  \section Sec_Compat Demo Compatibility:
   *
   *  The following list indicates what microcontrollers are compatible with this demo.
   *
   *  \li Series 7 USB AVRs (AT90USBxxx7)
   *
   *  \section Sec_Info USB Information:
   *
   *  The following table gives a rundown of the USB utilization of this demo.
   *
   *  <table>
   *   <tr>
   *    <td><b>USB Mode:</b></td>
   *    <td>Host</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Class:</b></td>
   *    <td>Mass Storage Device</td>
   *   </tr>
   *   <tr>
   *    <td><b>USB Subclass:</b></td>
   *    <td>Bulk Only</td>
   *   </tr>
   *   <tr>
   *    <td><b>Relevant Standards:</b></td>
   *    <td>USBIF Mass Storage Standard \n
   *        USB Bulk-Only Transport Standard \n
   *        SCSI Primary Commands Specification \n
   *        SCSI Block Commands Specification</td>
   *   </tr>
   *   <tr>
   *    <td><b>Supported USB Speeds:</b></td>
   *    <td>Full Speed Mode</td>
   *   </tr>
   *  </table>
   *
   *  \section Sec_Description Project Description:
   *
   *  Mass Storage host demonstration application. This gives a simple reference
   *  application for implementing a USB Mass Storage host, for USB storage devices
   *  using the standard Mass Storage USB profile.
   *
   *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
   *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
   *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
   *  of the disk will be dumped to the serial port.
   *
   *  \section Sec_Options Project Options
   *
   *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
   *
   *  <table>
   *   <tr>
   *    <td>
   *     None
   *    </td>
   *   </tr>
   *  </table>
   */