/**
   * \addtogroup uip
   * @{
   */
  
  /**
   * \defgroup uipopt Configuration options for uIP
   * @{
   *
   * uIP is configured using the per-project configuration file
   * "uipopt.h". This file contains all compile-time options for uIP and
   * should be tweaked to match each specific project. The uIP
   * distribution contains a documented example "uipopt.h" that can be
   * copied and modified for each project.
   */
  
  /**
   * \file
   * Configuration options for uIP.
   * \author Adam Dunkels <adam@dunkels.com>
   *
   * This file is used for tweaking various configuration options for
   * uIP. You should make a copy of this file into one of your project's
   * directories instead of editing this example "uipopt.h" file that
   * comes with the uIP distribution.
   */
  
  /*
   * Copyright (c) 2001-2003, Adam Dunkels.
   * All rights reserved.
   *
   * Redistribution and use in source and binary forms, with or without
   * modification, are permitted provided that the following conditions
   * are met:
   * 1. Redistributions of source code must retain the above copyright
   *    notice, this list of conditions and the following disclaimer.
   * 2. Redistributions in binary form must reproduce the above copyright
   *    notice, this list of conditions and the following disclaimer in the
   *    documentation and/or other materials provided with the distribution.
   * 3. The name of the author may not be used to endorse or promote
   *    products derived from this software without specific prior
   *    written permission.
   *
   * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
   * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
   * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
   * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
   * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
   * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   * This file is part of the uIP TCP/IP stack.
   *
   * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $
   *
   */
  
  #ifndef __UIPOPT_H__
  #define __UIPOPT_H__
  
  #include "Config/AppConfig.h"
  
  #ifndef UIP_LITTLE_ENDIAN
  #define UIP_LITTLE_ENDIAN  3412
  #endif /* UIP_LITTLE_ENDIAN */
  #ifndef UIP_BIG_ENDIAN
  #define UIP_BIG_ENDIAN     1234
  #endif /* UIP_BIG_ENDIAN */
  
  /*------------------------------------------------------------------------------*/
  
  /**
   * \defgroup uipoptstaticconf Static configuration options
   * @{
   *
   * These configuration options can be used for setting the IP address
   * settings statically, but only if UIP_FIXEDADDR is set to 1. The
   * configuration options for a specific node includes IP address,
   * netmask and default router as well as the Ethernet address. The
   * netmask, default router and Ethernet address are applicable only
   * if uIP should be run over Ethernet.
   *
   * This options are meaningful only for the IPv4 code.
   *
   * All of these should be changed to suit your project.
   */
  
  /**
   * Determines if uIP should use a fixed IP address or not.
   *
   * If uIP should use a fixed IP address, the settings are set in the
   * uipopt.h file. If not, the macros uip_sethostaddr(),
   * uip_setdraddr() and uip_setnetmask() should be used instead.
   *
   * \hideinitializer
   */
  #define UIP_FIXEDADDR    0
  
  /**
   * Ping IP address assignment.
   *
   * uIP uses a "ping" packets for setting its own IP address if this
   * option is set. If so, uIP will start with an empty IP address and
   * the destination IP address of the first incoming "ping" (ICMP echo)
   * packet will be used for setting the hosts IP address.
   *
   * \note This works only if UIP_FIXEDADDR is 0.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_PINGADDRCONF
  #define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF
  #else /* UIP_CONF_PINGADDRCONF */
  #define UIP_PINGADDRCONF 0
  #endif /* UIP_CONF_PINGADDRCONF */
  
  
  /**
   * Specifies if the uIP ARP module should be compiled with a fixed
   * Ethernet MAC address or not.
   *
   * If this configuration option is 0, the macro uip_setethaddr() can
   * be used to specify the Ethernet address at run-time.
   *
   * \hideinitializer
   */
  #define UIP_FIXEDETHADDR 0
  
  /** @} */
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipoptip IP configuration options
   * @{
   *
   */
  /**
   * The IP TTL (time to live) of IP packets sent by uIP.
   *
   * This should normally not be changed.
   */
  #define UIP_TTL         64
  
  /**
   * The maximum time an IP fragment should wait in the reassembly
   * buffer before it is dropped.
   *
   */
  #define UIP_REASS_MAXAGE 60 /*60s*/
  
  /**
   * Turn on support for IP packet reassembly.
   *
   * uIP supports reassembly of fragmented IP packets. This features
   * requires an additional amount of RAM to hold the reassembly buffer
   * and the reassembly code size is approximately 700 bytes.  The
   * reassembly buffer is of the same size as the uip_buf buffer
   * (configured by UIP_BUFSIZE).
   *
   * \note IP packet reassembly is not heavily tested.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_REASSEMBLY
  #define UIP_REASSEMBLY UIP_CONF_REASSEMBLY
  #else /* UIP_CONF_REASSEMBLY */
  #define UIP_REASSEMBLY 0
  #endif /* UIP_CONF_REASSEMBLY */
  /** @} */
  
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipoptipv6 IPv6 configuration options
   * @{
   *
   */
  
  /** The maximum transmission unit at the IP Layer*/
  #define UIP_LINK_MTU 1280
  
  #ifndef UIP_CONF_IPV6
  /** Do we use IPv6 or not (default: no) */
  #define UIP_CONF_IPV6                 0
  #endif
  
  #ifndef UIP_CONF_IPV6_QUEUE_PKT
  /** Do we do per %neighbor queuing during address resolution (default: no) */
  #define UIP_CONF_IPV6_QUEUE_PKT       0
  #endif
  
  #ifndef UIP_CONF_IPV6_CHECKS
  /** Do we do IPv6 consistency checks (highly recommended, default: yes) */
  #define UIP_CONF_IPV6_CHECKS          1
  #endif
  
  #ifndef UIP_CONF_IPV6_REASSEMBLY
  /** Do we do IPv6 fragmentation (default: no) */
  #define UIP_CONF_IPV6_REASSEMBLY      0
  #endif
  
  #ifndef UIP_CONF_NETIF_MAX_ADDRESSES
  /** Default number of IPv6 addresses associated to the node's interface */
  #define UIP_CONF_NETIF_MAX_ADDRESSES  3
  #endif
  
  #ifndef UIP_CONF_ND6_MAX_PREFIXES
  /** Default number of IPv6 prefixes associated to the node's interface */
  #define UIP_CONF_ND6_MAX_PREFIXES     3
  #endif
  
  #ifndef UIP_CONF_ND6_MAX_NEIGHBORS
  /** Default number of neighbors that can be stored in the %neighbor cache */
  #define UIP_CONF_ND6_MAX_NEIGHBORS    4
  #endif
  
  #ifndef UIP_CONF_ND6_MAX_DEFROUTERS
  /** Minimum number of default routers */
  #define UIP_CONF_ND6_MAX_DEFROUTERS   2
  #endif
  /** @} */
  
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipoptudp UDP configuration options
   * @{
   *
   * \note The UDP support in uIP is still not entirely complete; there
   * is no support for sending or receiving broadcast or multicast
   * packets, but it works well enough to support a number of vital
   * applications such as DNS queries, though
   */
  
  /**
   * Toggles whether UDP support should be compiled in or not.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_UDP
  #define UIP_UDP UIP_CONF_UDP
  #else /* UIP_CONF_UDP */
  #define UIP_UDP           1
  #endif /* UIP_CONF_UDP */
  
  /**
   * Toggles if UDP checksums should be used or not.
   *
   * \note Support for UDP checksums is currently not included in uIP,
   * so this option has no function.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_UDP_CHECKSUMS
  #define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS
  #else
  #define UIP_UDP_CHECKSUMS 0
  #endif
  
  /**
   * The maximum amount of concurrent UDP connections.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_UDP_CONNS
  #define UIP_UDP_CONNS UIP_CONF_UDP_CONNS
  #else /* UIP_CONF_UDP_CONNS */
  #define UIP_UDP_CONNS    10
  #endif /* UIP_CONF_UDP_CONNS */
  
  /**
   * The name of the function that should be called when UDP datagrams arrive.
   *
   * \hideinitializer
   */
  
  
  /** @} */
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipopttcp TCP configuration options
   * @{
   */
  
  /**
   * Toggles whether TCP support should be compiled in or not.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_TCP
  #define UIP_TCP UIP_CONF_TCP
  #else /* UIP_CONF_TCP */
  #define UIP_TCP           1
  #endif /* UIP_CONF_TCP */
  
  /**
   * Determines if support for opening connections from uIP should be
   * compiled in.
   *
   * If the applications that are running on top of uIP for this project
   * do not need to open outgoing TCP connections, this configuration
   * option can be turned off to reduce the code size of uIP.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_ACTIVE_OPEN
  #define UIP_ACTIVE_OPEN 1
  #else /* UIP_CONF_ACTIVE_OPEN */
  #define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN
  #endif /* UIP_CONF_ACTIVE_OPEN */
  
  /**
   * The maximum number of simultaneously open TCP connections.
   *
   * Since the TCP connections are statically allocated, turning this
   * configuration knob down results in less RAM used. Each TCP
   * connection requires approximately 30 bytes of memory.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_MAX_CONNECTIONS
  #define UIP_CONNS       10
  #else /* UIP_CONF_MAX_CONNECTIONS */
  #define UIP_CONNS UIP_CONF_MAX_CONNECTIONS
  #endif /* UIP_CONF_MAX_CONNECTIONS */
  
  
  /**
   * The maximum number of simultaneously listening TCP ports.
   *
   * Each listening TCP port requires 2 bytes of memory.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_MAX_LISTENPORTS
  #define UIP_LISTENPORTS 20
  #else /* UIP_CONF_MAX_LISTENPORTS */
  #define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS
  #endif /* UIP_CONF_MAX_LISTENPORTS */
  
  /**
   * Determines if support for TCP urgent data notification should be
   * compiled in.
   *
   * Urgent data (out-of-band data) is a rarely used TCP feature that
   * very seldom would be required.
   *
   * \hideinitializer
   */
  #if !defined(UIP_URGDATA)
  #define UIP_URGDATA      0
  #endif
  
  /**
   * The initial retransmission timeout counted in timer pulses.
   *
   * This should not be changed.
   */
  #if !defined(UIP_RTO)
  #define UIP_RTO         3
  #endif
  
  /**
   * The maximum number of times a segment should be retransmitted
   * before the connection should be aborted.
   *
   * This should not be changed.
   */
  #if !defined(UIP_MAXRTX)
  #define UIP_MAXRTX      8
  #endif
  
  /**
   * The maximum number of times a SYN segment should be retransmitted
   * before a connection request should be deemed to have been
   * unsuccessful.
   *
   * This should not need to be changed.
   */
  #if !defined(UIP_MAXSYNRTX)
  #define UIP_MAXSYNRTX      5
  #endif
  
  /**
   * The TCP maximum segment size.
   *
   * This is should not be to set to more than
   * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN.
   */
  #ifdef UIP_CONF_TCP_MSS
  #define UIP_TCP_MSS UIP_CONF_TCP_MSS
  #else
  #define UIP_TCP_MSS     (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
  #endif
  
  /**
   * The size of the advertised receiver's window.
   *
   * Should be set low (i.e., to the size of the uip_buf buffer) if the
   * application is slow to process incoming data, or high (32768 bytes)
   * if the application processes data quickly.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_RECEIVE_WINDOW
  #define UIP_RECEIVE_WINDOW UIP_TCP_MSS
  #else
  #define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW
  #endif
  
  /**
   * How long a connection should stay in the TIME_WAIT state.
   *
   * This configuration option has no real implication, and it should be
   * left untouched.
   */
  #define UIP_TIME_WAIT_TIMEOUT 120
  
  
  /** @} */
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipoptarp ARP configuration options
   * @{
   */
  
  /**
   * The size of the ARP table.
   *
   * This option should be set to a larger value if this uIP node will
   * have many connections from the local network.
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_ARPTAB_SIZE
  #define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE
  #else
  #define UIP_ARPTAB_SIZE 8
  #endif
  
  /**
   * The maximum age of ARP table entries measured in 10ths of seconds.
   *
   * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD
   * default).
   */
  #define UIP_ARP_MAXAGE 120
  
  
  /** @} */
  
  /*------------------------------------------------------------------------------*/
  
  /**
   * \defgroup uipoptmac layer 2 options (for ipv6)
   * @{
   */
  
  #define UIP_DEFAULT_PREFIX_LEN 64
  
  /** @} */
  
  /*------------------------------------------------------------------------------*/
  
  /**
   * \defgroup uipoptsics 6lowpan options (for ipv6)
   * @{
   */
  /**
   * Timeout for packet reassembly at the 6lowpan layer
   * (should be < 60s)
   */
  #ifdef SICSLOWPAN_CONF_MAXAGE
  #define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE
  #else
  #define SICSLOWPAN_REASS_MAXAGE 20
  #endif
  
  /**
   * Do we compress the IP header or not (default: no)
   */
  #ifndef SICSLOWPAN_CONF_COMPRESSION
  #define SICSLOWPAN_CONF_COMPRESSION 0
  #endif
  
  /**
   * If we use IPHC compression, how many address contexts do we support
   */
  #ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
  #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
  #endif
  
  /**
   * Do we support 6lowpan fragmentation
   */
  #ifndef SICSLOWPAN_CONF_FRAG
  #define SICSLOWPAN_CONF_FRAG  0
  #endif
  
  /** @} */
  
  /*------------------------------------------------------------------------------*/
  
  /**
   * \defgroup uipoptgeneral General configuration options
   * @{
   */
  
  /**
   * The size of the uIP packet buffer.
   *
   * The uIP packet buffer should not be smaller than 60 bytes, and does
   * not need to be larger than 1514 bytes. Lower size results in lower
   * TCP throughput, larger size results in higher TCP throughput.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_BUFFER_SIZE
  #define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN
  #else /* UIP_CONF_BUFFER_SIZE */
  #define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE
  #endif /* UIP_CONF_BUFFER_SIZE */
  
  
  /**
   * Determines if statistics support should be compiled in.
   *
   * The statistics is useful for debugging and to show the user.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_STATISTICS
  #define UIP_STATISTICS  0
  #else /* UIP_CONF_STATISTICS */
  #define UIP_STATISTICS UIP_CONF_STATISTICS
  #endif /* UIP_CONF_STATISTICS */
  
  /**
   * Determines if logging of certain events should be compiled in.
   *
   * This is useful mostly for debugging. The function uip_log()
   * must be implemented to suit the architecture of the project, if
   * logging is turned on.
   *
   * \hideinitializer
   */
  #ifndef UIP_CONF_LOGGING
  #define UIP_LOGGING     0
  #else /* UIP_CONF_LOGGING */
  #define UIP_LOGGING     UIP_CONF_LOGGING
  #endif /* UIP_CONF_LOGGING */
  
  /**
   * Broadcast support.
   *
   * This flag configures IP broadcast support. This is useful only
   * together with UDP.
   *
   * \hideinitializer
   *
   */
  #ifndef UIP_CONF_BROADCAST
  #define UIP_BROADCAST 0
  #else /* UIP_CONF_BROADCAST */
  #define UIP_BROADCAST UIP_CONF_BROADCAST
  #endif /* UIP_CONF_BROADCAST */
  
  /**
   * Print out a uIP log message.
   *
   * This function must be implemented by the module that uses uIP, and
   * is called by uIP whenever a log message is generated.
   */
  void uip_log(char *msg);
  
  /**
   * The link level header length.
   *
   * This is the offset into the uip_buf where the IP header can be
   * found. For Ethernet, this should be set to 14. For SLIP, this
   * should be set to 0.
   *
   * \note we probably won't use this constant for other link layers than
   * ethernet as they have variable header length (this is due to variable
   * number and type of address fields and to optional security features)
   * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14
   *       802.11 -> 4 + (6*3/4) + 2
   * \hideinitializer
   */
  #ifdef UIP_CONF_LLH_LEN
  #define UIP_LLH_LEN UIP_CONF_LLH_LEN
  #else /* UIP_LLH_LEN */
  #define UIP_LLH_LEN     14
  #endif /* UIP_CONF_LLH_LEN */
  
  /** @} */
  /*------------------------------------------------------------------------------*/
  /**
   * \defgroup uipoptcpu CPU architecture configuration
   * @{
   *
   * The CPU architecture configuration is where the endianess of the
   * CPU on which uIP is to be run is specified. Most CPUs today are
   * little endian, and the most notable exception are the Motorolas
   * which are big endian. The BYTE_ORDER macro should be changed to
   * reflect the CPU architecture on which uIP is to be run.
   */
  
  /**
   * The byte order of the CPU architecture on which uIP is to be run.
   *
   * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or
   * UIP_LITTLE_ENDIAN (Intel byte order).
   *
   * \hideinitializer
   */
  #ifdef UIP_CONF_BYTE_ORDER
  #define UIP_BYTE_ORDER     UIP_CONF_BYTE_ORDER
  #else /* UIP_CONF_BYTE_ORDER */
  #define UIP_BYTE_ORDER     UIP_LITTLE_ENDIAN
  #endif /* UIP_CONF_BYTE_ORDER */
  
  /** @} */
  /*------------------------------------------------------------------------------*/
  
  #include <ff.h>
  #include <stdbool.h>
  #include <stdint.h>
  
  #include "timer.h"
  
  typedef uint8_t u8_t;
  typedef uint16_t u16_t;
  typedef uint32_t u32_t;
  typedef uint32_t uip_stats_t;
  
  /**
   * \defgroup uipoptapp Application specific configurations
   * @{
   *
   * An uIP application is implemented using a single application
   * function that is called by uIP whenever a TCP/IP event occurs. The
   * name of this function must be registered with uIP at compile time
   * using the UIP_APPCALL definition.
   *
   * uIP applications can store the application state within the
   * uip_conn structure by specifying the type of the application
   * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t.
   *
   * The file containing the definitions must be included in the
   * uipopt.h file.
   *
   * The following example illustrates how this can look.
   \code
  
   void httpd_appcall(void);
   #define UIP_APPCALL     httpd_appcall
  
   struct httpd_state {
   u8_t state;
   u16_t count;
   char *dataptr;
   char *script;
   };
   typedef struct httpd_state uip_tcp_appstate_t
   \endcode
  */
  #define UIP_UDP_APPCALL uIPManagement_UDPCallback
  void UIP_UDP_APPCALL(void);
  
  /**
   * \var #define UIP_APPCALL
   *
   * The name of the application function that uIP should call in
   * response to TCP/IP events.
   *
   */
  #define UIP_APPCALL     uIPManagement_TCPCallback
  void UIP_APPCALL(void);
  
  /**
   * \var typedef uip_tcp_appstate_t
   *
   * The type of the application state that is to be stored in the
   * uip_conn structure. This usually is typedef:ed to a struct holding
   * application state information.
   */
  typedef union
  {
  	struct
  	{
  		uint8_t  CurrentState;
  		uint8_t  NextState;
  
  		char     FileName[MAX_URI_LENGTH];
  		FIL      FileHandle;
  		bool     FileOpen;
  		uint32_t ACKedFilePos;
  		uint16_t SentChunkSize;
  	} HTTPServer;
  
  	struct
  	{
  		uint8_t  CurrentState;
  		uint8_t  NextState;
  
  		uint8_t  IssuedCommand;
  	} TELNETServer;
  } uip_tcp_appstate_t;
  
  /**
   * \var typedef uip_udp_appstate_t
   *
   * The type of the application state that is to be stored in the
   * uip_conn structure. This usually is typedef:ed to a struct holding
   * application state information.
   */
  typedef union
  {
  	struct
  	{
  		uint8_t      CurrentState;
  		struct timer Timeout;
  
  		struct
  		{
  			uint8_t AllocatedIP[4];
  			uint8_t Netmask[4];
  			uint8_t GatewayIP[4];
  			uint8_t ServerIP[4];
  		} DHCPOffer_Data;
  	} DHCPClient;
  } uip_udp_appstate_t;
  /** @} */
  
  #endif /* __UIPOPT_H__ */
  /** @} */
  /** @} */