/* * Copyright (C) 2016 Kaspar Schleiser * 2015 Freie Universität Berlin * 2015 Engineering-Spirit * * This file is subject to the terms and conditions of the GNU Lesser * General Public License v2.1. See the file LICENSE in the top level * directory for more details. */ /** * @ingroup cpu_stm32_common * @ingroup drivers_periph_pm * @{ * * @file * @brief Implementation of the kernels power management interface * * @author Nick v. IJzendoorn * @author Kaspar Schleiser * @author Fabian Nack * * @} */ #include "irq.h" #include "periph/pm.h" #if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) #include "stmclk.h" #endif #define ENABLE_DEBUG (0) #include "debug.h" #ifndef PM_STOP_CONFIG /** * @brief Define config flags for stop mode * * Available values can be found in reference manual, PWR section, register CR. */ #define PM_STOP_CONFIG (PWR_CR_LPDS | PWR_CR_FPDS) #endif void pm_set(unsigned mode) { int deep = 0; /* I just copied it from stm32f1/2/4, but I suppose it would work for the * others... /KS */ #if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) switch (mode) { case 0: /* Set PDDS to enter standby mode on deepsleep and clear flags */ PWR->CR |= (PWR_CR_PDDS | PWR_CR_CWUF | PWR_CR_CSBF); /* Enable WKUP pin to use for wakeup from standby mode */ PWR->CSR |= PWR_CSR_EWUP; /* Set SLEEPDEEP bit of system control block */ deep = 1; break; case 1: /* STM Stop mode */ /* Clear PDDS and LPDS bits to enter stop mode on */ /* deepsleep with voltage regulator on */ PWR->CR &= ~(PWR_CR_PDDS | PWR_CR_LPDS); PWR->CR |= PM_STOP_CONFIG; /* Set SLEEPDEEP bit of system control block */ deep = 1; break; } #endif cortexm_sleep(deep); #if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) if (deep) { /* Re-init clock after STOP */ stmclk_init_sysclk(); } #endif } #if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) void pm_off(void) { irq_disable(); pm_set(0); } #endif