/*
 * Copyright (C) 2014 Freie Universität Berlin
 *
 * This file is subject to the terms and conditions of the GNU Lesser General
 * Public License v2.1. See the file LICENSE in the top level directory for more
 * details.
 */

/**
 * @ingroup     boards_pca10000
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the nRF51822 board pca10000
 *
 * @author      Christian Kühling <kuehling@zedat.fu-berlin.de>
 * @author      Timo Ziegler <timo.ziegler@fu-berlin.de>
 * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
 */

#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H

#include "periph_cpu.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @name    Clock configuration
 *
 * @note    The radio will not work with the internal RC oscillator!
 *
 * @{
 */
#define CLOCK_HFCLK         (16U)           /* set to  0: internal RC oscillator
                                                      16: 16MHz crystal
                                                      32: 32MHz crystal */
#define CLOCK_LFCLK         (0)             /* set to  0: internal RC oscillator
                                             *         1: 32.768 kHz crystal
                                             *         2: derived from HFCLK */
/** @} */

/**
 * @name    Timer configuration
 * @{
 */
static const timer_conf_t timer_config[] = {
    /* dev, channels, width */
    { NRF_TIMER0, 3, TIMER_BITMODE_BITMODE_24Bit, TIMER0_IRQn }
};

#define TIMER_0_ISR         isr_timer0

#define TIMER_NUMOF         (sizeof(timer_config) / sizeof(timer_config[0]))
/** @} */

/**
 * @name    Real time counter configuration
 * @{
 */
#define RTT_NUMOF           (1U)
#define RTT_DEV             (1)             /* NRF_RTC1 */
#define RTT_MAX_VALUE       (0x00ffffff)
#define RTT_FREQUENCY       (1024)
/** @} */

/**
 * @name    UART configuration
 * @{
 */
#define UART_NUMOF          (1U)
/* UART pin configuration */
#define UART_HWFLOWCTRL   1
#define UART_PIN_RX       11
#define UART_PIN_TX       9
#define UART_PIN_RTS      8
#define UART_PIN_CTS      10
/** @} */

/**
 * @name    ADC configuration
 *
 * The configuration consists simply of a list of channels that should be used
 * @{
 */
#define ADC_NUMOF          (0)
/** @} */

/**
 * @name    Radio device configuration
 *
 * The radio is not guarded by a NUMOF define, as the radio is selected by its
 * own module in the build system.
 * @{
 */
#define RADIO_IRQ_PRIO      1
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H */