master/RIOT/sys/ecc/hamming256/hamming256.c

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support
 * ----------------------------------------------------------------------------
 * Copyright (c) 2008, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */
/**
 * @file
 *
 * Implementation of the hamming code functions.
 *
 */
/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/
#include <stdint.h>
#define ENABLE_DEBUG (0)
#include "debug.h"
#include "ecc/hamming256.h"
#include "bitarithm.h"
/*----------------------------------------------------------------------------
 *         Internal function
 *----------------------------------------------------------------------------*/
/**
 *  @brief Counts and return the number of bits set to '1' in the given hamming code.
 *  @param code  Hamming code.
 */
static uint8_t count_bits_in_code256(uint8_t *code)
{
    return bitarithm_bits_set(code[0]) +  bitarithm_bits_set(code[1]) +  bitarithm_bits_set(code[2]);
}
/**
 *  @brief Calculates the 22-bit hamming code for a 256-bytes block of data.
 *  @param data  Data buffer to calculate code for.
 *  @param code  Pointer to a buffer where the code should be stored.
 *  @param padding Amount of zeroes to be appended to the data such that it sizes
 *                 equals 256 bytes
 */
static void compute256(const uint8_t *data, uint8_t *code, uint8_t padding)
{
    uint32_t i;
    uint8_t columnSum = 0;
    uint8_t evenLineCode = 0;
    uint8_t oddLineCode = 0;
    uint8_t evenColumnCode = 0;
    uint8_t oddColumnCode = 0;
    /*
     * Xor all bytes together to get the column sum;
     * At the same time, calculate the even and odd line codes
     */
    for (i = 0; i < 256; i++) {
        /* Allow non-multiples of 256 to be calculated by padding the data with zeroes */
        uint8_t current = 0;
        if (i < ((uint16_t)(256 - padding))) {
            current = data[i];
        }
        columnSum ^= current;
        /*
         * If the xor sum of the byte is 0, then this byte has no incidence on
         * the computed code; so check if the sum is 1.
         */
        if ((bitarithm_bits_set(current) & 1) == 1) {
            /*
             * Parity groups are formed by forcing a particular index bit to 0
             * (even) or 1 (odd).
             * Example on one byte:
             *
             * bits (dec)  7   6   5   4   3   2   1   0
             *      (bin) 111 110 101 100 011 010 001 000
             *                            '---'---'---'----------.
             *                                                   |
             * groups P4' ooooooooooooooo eeeeeeeeeeeeeee P4     |
             *        P2' ooooooo eeeeeee ooooooo eeeeeee P2     |
             *        P1' ooo eee ooo eee ooo eee ooo eee P1     |
             *                                                   |
             * We can see that:                                  |
             *  - P4  -> bit 2 of index is 0 --------------------'
             *  - P4' -> bit 2 of index is 1.
             *  - P2  -> bit 1 of index if 0.
             *  - etc...
             * We deduce that a bit position has an impact on all even Px if
             * the log2(x)nth bit of its index is 0
             *     ex: log2(4) = 2, bit2 of the index must be 0 (-> 0 1 2 3)
             * and on all odd Px' if the log2(x)nth bit of its index is 1
             *     ex: log2(2) = 1, bit1 of the index must be 1 (-> 0 1 4 5)
             *
             * As such, we calculate all the possible Px and Px' values at the
             * same time in two variables, evenLineCode and oddLineCode, such as
             *     evenLineCode bits: P128  P64  P32  P16  P8  P4  P2  P1
             *     oddLineCode  bits: P128' P64' P32' P16' P8' P4' P2' P1'
             */
            evenLineCode ^= (255 - i);
            oddLineCode ^= i;
        }
    }
    /*
     * At this point, we have the line parities, and the column sum. First, We
     * must caculate the parity group values on the column sum.
     */
    for (i = 0; i < 8; i++) {
        if (columnSum & 1) {
            evenColumnCode ^= (7 - i);
            oddColumnCode ^= i;
        }
        columnSum >>= 1;
    }
    /*
     * Now, we must interleave the parity values, to obtain the following layout:
     * Code[0] = Line1
     * Code[1] = Line2
     * Code[2] = Column
     * Line = Px' Px P(x-1)- P(x-1) ...
     * Column = P4' P4 P2' P2 P1' P1 PadBit PadBit
     */
    code[0] = 0;
    code[1] = 0;
    code[2] = 0;
    for (i = 0; i < 4; i++) {
        code[0] <<= 2;
        code[1] <<= 2;
        code[2] <<= 2;
        /* Line 1 */
        if ((oddLineCode & 0x80) != 0) {
            code[0] |= 2;
        }
        if ((evenLineCode & 0x80) != 0) {
            code[0] |= 1;
        }
        /* Line 2 */
        if ((oddLineCode & 0x08) != 0) {
            code[1] |= 2;
        }
        if ((evenLineCode & 0x08) != 0) {
            code[1] |= 1;
        }
        /* Column */
        if ((oddColumnCode & 0x04) != 0) {
            code[2] |= 2;
        }
        if ((evenColumnCode & 0x04) != 0) {
            code[2] |= 1;
        }
        oddLineCode <<= 1;
        evenLineCode <<= 1;
        oddColumnCode <<= 1;
        evenColumnCode <<= 1;
    }
    /* Invert codes (linux compatibility) */
    code[0] = (~(uint32_t)code[0]);
    code[1] = (~(uint32_t)code[1]);
    code[2] = (~(uint32_t)code[2]);
    DEBUG("Computed code = %02X %02X %02X\n\r",
          code[0], code[1], code[2]);
}
/**
 *  @brief Verifies and corrects a 256-bytes block of data using the given 22-bits
 *  hamming code.
 *
 *  @param data  Data buffer to check.
 *  @param originalCode  Hamming code to use for verifying the data.
 *  @param padding Amount of zeroes to be appended to the data such that it sizes
 *                 equals 256 bytes
 *
 *  @return 0 if there is no error, otherwise returns a HAMMING_ERROR code.
 */
uint8_t verify256( uint8_t *pucData, const uint8_t *pucOriginalCode, uint8_t padding )
{
    /* Calculate new code */
    uint8_t computedCode[3];
    uint8_t correctionCode[3];
    compute256( pucData, computedCode, padding);
    /* Xor both codes together */
    correctionCode[0] = computedCode[0] ^ pucOriginalCode[0];
    correctionCode[1] = computedCode[1] ^ pucOriginalCode[1];
    correctionCode[2] = computedCode[2] ^ pucOriginalCode[2];
    DEBUG( "Correction code = %02X %02X %02X\n\r", correctionCode[0], correctionCode[1], correctionCode[2] );
    /* If all bytes are 0, there is no error */
    if ((correctionCode[0] == 0) && (correctionCode[1] == 0) && (correctionCode[2] == 0)) {
        return 0;
    }
    /* If there is a single bit error, there are 11 bits set to 1 */
    if (count_bits_in_code256( correctionCode ) == 11) {
        /* Get byte and bit indexes */
        uint8_t byte;
        uint8_t bit;
        byte = correctionCode[0] & 0x80;
        byte |= (correctionCode[0] << 1) & 0x40;
        byte |= (correctionCode[0] << 2) & 0x20;
        byte |= (correctionCode[0] << 3) & 0x10;
        byte |= (correctionCode[1] >> 4) & 0x08;
        byte |= (correctionCode[1] >> 3) & 0x04;
        byte |= (correctionCode[1] >> 2) & 0x02;
        byte |= (correctionCode[1] >> 1) & 0x01;
        bit = (correctionCode[2] >> 5) & 0x04;
        bit |= (correctionCode[2] >> 4) & 0x02;
        bit |= (correctionCode[2] >> 3) & 0x01;
        /* Correct bit */
        DEBUG("Correcting byte #%d at bit %d\n\r", byte, bit );
        pucData[byte] ^= (1 << bit);
        return Hamming_ERROR_SINGLEBIT;
    }
    /* Check if ECC has been corrupted */
    if (count_bits_in_code256( correctionCode ) == 1) {
        return Hamming_ERROR_ECC;
    }
    /* Otherwise, this is a multi-bit error */
    else {
        return Hamming_ERROR_MULTIPLEBITS;
    }
}
/*----------------------------------------------------------------------------
 *         Exported functions
 *----------------------------------------------------------------------------*/
void hamming_compute256x( const uint8_t *pucData, uint32_t dwSize, uint8_t *puCode )
{
    DEBUG("hamming_compute256x()\n\r");
    while (dwSize > 0) {
        uint8_t padding = 0;
        if (dwSize < 256) {
            padding = 256 - dwSize;
        }
        compute256( pucData, puCode, padding );
        pucData += 256;
        puCode += 3;
        dwSize -= (256 - padding);
    }
}
uint8_t hamming_verify256x( uint8_t *pucData, uint32_t dwSize, const uint8_t *pucCode )
{
    uint8_t result = 0;
    DEBUG( "hamming_verify256x()\n\r" );
    while (dwSize > 0) {
        uint8_t error, padding = 0;
        if (dwSize < 256) {
            padding = 256 - dwSize;
        }
        error = verify256( pucData, pucCode, padding );
        if (error == Hamming_ERROR_SINGLEBIT) {
            result = Hamming_ERROR_SINGLEBIT;
        }
        else {
            if (error) {
                return error;
            }
        }
        pucData += 256;
        pucCode += 3;
        dwSize -= (256 - padding);
    }
    return result;
}