a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
/*
* Copyright (C) 2013 Zakaria Kasmi <zkasmi@inf.fu-berlin.de>
* 2015 Freie Universitรคt Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup drivers_srf02
* @{
*
* @file
* @brief Driver for the SRF02 ultrasonic range sensor
*
* @author Zakaria Kasmi <zkasmi@inf.fu-berlin.de>
* @author Peter Kietzmann <peter.kietzmann@haw-hamburg.de>
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*
* @}
*/
#include <stdint.h>
#include <stdio.h>
#include "xtimer.h"
#include "srf02.h"
#include "periph/i2c.h"
#define ENABLE_DEBUG (0)
#include "debug.h"
/**
* @brief Per default use normal speed on the I2C bus
*/
#define BUS_SPEED (I2C_SPEED_NORMAL)
/**
* @brief SRF02 register addresses
* @{
*/
#define REG_CMD (0x00)
#define REG_HIGH (0x02)
#define REG_LOW (0x03)
#define REG_AUTO_HIGH (0x04)
#define REG_AUTO_LOW (0x05)
/** @} */
/**
* @brief Some additional SRF02 commands
* @{
*/
#define CMD_ADDR_SEQ1 (0xa0)
#define CMD_ADDR_SEQ2 (0xaa)
#define CMD_ADDR_SEQ3 (0xa5)
/** @} */
int srf02_init(srf02_t *dev, i2c_t i2c, uint8_t addr)
{
dev->i2c = i2c;
dev->addr = (addr >> 1); /* internally we right align the 7-bit addr */
uint8_t rev;
/* Acquire exclusive access to the bus. */
i2c_acquire(dev->i2c);
/* initialize i2c interface */
if (i2c_init_master(dev->i2c, BUS_SPEED) < 0) {
DEBUG("[srf02] error initializing I2C bus\n");
return -1;
}
/* try to read the software revision (read the CMD reg) from the device */
i2c_read_reg(i2c, dev->addr, REG_CMD, &rev);
if (rev == 0 || rev == 255) {
i2c_release(dev->i2c);
DEBUG("[srf02] error reading the devices software revision\n");
return -1;
} else {
DEBUG("[srf02] software revision: 0x%02x\n", rev);
}
/* Release the bus for other threads. */
i2c_release(dev->i2c);
DEBUG("[srf02] initialization successful\n");
return 0;
}
void srf02_trigger(const srf02_t *dev, srf02_mode_t mode)
{
/* trigger a new measurement by writing the mode to the CMD register */
DEBUG("[srf02] trigger new reading\n");
i2c_acquire(dev->i2c);
i2c_write_reg(dev->i2c, dev->addr, REG_CMD, mode);
i2c_release(dev->i2c);
}
uint16_t srf02_read(const srf02_t *dev)
{
uint8_t res[2];
/* read the results */
i2c_acquire(dev->i2c);
i2c_read_regs(dev->i2c, dev->addr, REG_HIGH, res, 2);
i2c_release(dev->i2c);
DEBUG("[srf02] result - high: 0x%02x low: 0x%02x\n", res[0], res[1]);
/* compile result - TODO: fix for different host byte order other than LE */
return ((((uint16_t)res[0]) << 8) | (res[1] & 0xff));
}
uint16_t srf02_get_distance(const srf02_t *dev, srf02_mode_t mode)
{
/* trigger a new reading */
srf02_trigger(dev, mode);
/* give the sensor the required time for sampling */
xtimer_usleep(SRF02_RANGE_DELAY);
/* get the results */
return srf02_read(dev);
}
void srf02_set_addr(srf02_t *dev, uint8_t new_addr)
{
/* get access to the bus */
i2c_acquire(dev->i2c);
DEBUG("[srf02] reprogramming device address to 0x%02x\n", (int)new_addr);
/* write the new address, for this we need to follow a certain sequence */
i2c_write_reg(dev->i2c, dev->addr, REG_CMD, CMD_ADDR_SEQ1);
i2c_write_reg(dev->i2c, dev->addr, REG_CMD, CMD_ADDR_SEQ2);
i2c_write_reg(dev->i2c, dev->addr, REG_CMD, CMD_ADDR_SEQ3);
i2c_write_reg(dev->i2c, dev->addr, REG_CMD, new_addr);
dev->addr = (new_addr >> 1);
/* release the bus */
i2c_release(dev->i2c);
}
|