a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
|
/*
* Copyright (C) 2014 Freie Universitรคt Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup drivers_lsm303dlhc
* @{
*
* @file
* @brief Device driver implementation for the LSM303DLHC 3D accelerometer/magnetometer.
*
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
* @author Peter Kietzmann <peter.kietzmann@haw-hamburg.de>
*
* @}
*/
#include "lsm303dlhc.h"
#include "lsm303dlhc-internal.h"
#define ENABLE_DEBUG (0)
#include "debug.h"
int lsm303dlhc_init(lsm303dlhc_t *dev, i2c_t i2c, gpio_t acc_pin, gpio_t mag_pin,
uint8_t acc_address,
lsm303dlhc_acc_sample_rate_t acc_sample_rate,
lsm303dlhc_acc_scale_t acc_scale,
uint8_t mag_address,
lsm303dlhc_mag_sample_rate_t mag_sample_rate,
lsm303dlhc_mag_gain_t mag_gain)
{
int res;
uint8_t tmp;
dev->i2c = i2c;
dev->acc_address = acc_address;
dev->mag_address = mag_address;
dev->acc_pin = acc_pin;
dev->mag_pin = mag_pin;
dev->acc_scale = acc_scale;
dev->mag_gain = mag_gain;
/* Acquire exclusive access to the bus. */
i2c_acquire(dev->i2c);
i2c_init_master(i2c, I2C_SPEED_NORMAL);
DEBUG("lsm303dlhc reboot...");
res = i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CTRL5_A, LSM303DLHC_REG_CTRL5_A_BOOT);
/* Release the bus for other threads. */
i2c_release(dev->i2c);
DEBUG("[OK]\n");
/* configure accelerometer */
/* enable all three axis and set sample rate */
tmp = (LSM303DLHC_CTRL1_A_XEN
| LSM303DLHC_CTRL1_A_YEN
| LSM303DLHC_CTRL1_A_ZEN
| acc_sample_rate);
i2c_acquire(dev->i2c);
res += i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CTRL1_A, tmp);
/* update on read, MSB @ low address, scale and high-resolution */
tmp = (acc_scale | LSM303DLHC_CTRL4_A_HR);
res += i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CTRL4_A, tmp);
/* no interrupt generation */
res += i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CTRL3_A, LSM303DLHC_CTRL3_A_I1_NONE);
/* configure acc data ready pin */
gpio_init(acc_pin, GPIO_IN);
/* configure magnetometer and temperature */
/* enable temperature output and set sample rate */
tmp = LSM303DLHC_TEMP_EN | mag_sample_rate;
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_CRA_M, tmp);
/* configure z-axis gain */
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_CRB_M, mag_gain);
/* set continuous mode */
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_MR_M, LSM303DLHC_MAG_MODE_CONTINUOUS);
i2c_release(dev->i2c);
/* configure mag data ready pin */
gpio_init(mag_pin, GPIO_IN);
return (res < 7) ? -1 : 0;
}
int lsm303dlhc_read_acc(const lsm303dlhc_t *dev, lsm303dlhc_3d_data_t *data)
{
int res;
uint8_t tmp;
i2c_acquire(dev->i2c);
i2c_read_reg(dev->i2c, dev->acc_address, LSM303DLHC_REG_STATUS_A, &tmp);
DEBUG("lsm303dlhc status: %x\n", tmp);
DEBUG("lsm303dlhc: wait for acc values ... ");
res = i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_X_L_A, &tmp);
data->x_axis = tmp;
res += i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_X_H_A, &tmp);
data->x_axis |= tmp<<8;
res += i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_Y_L_A, &tmp);
data->y_axis = tmp;
res += i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_Y_H_A, &tmp);
data->y_axis |= tmp<<8;
res += i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_Z_L_A, &tmp);
data->z_axis = tmp;
res += i2c_read_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_OUT_Z_H_A, &tmp);
data->z_axis |= tmp<<8;
i2c_release(dev->i2c);
DEBUG("read ... ");
data->x_axis = data->x_axis>>4;
data->y_axis = data->y_axis>>4;
data->z_axis = data->z_axis>>4;
if (res < 6) {
DEBUG("[!!failed!!]\n");
return -1;
}
DEBUG("[done]\n");
return 0;
}
int lsm303dlhc_read_mag(const lsm303dlhc_t *dev, lsm303dlhc_3d_data_t *data)
{
int res;
DEBUG("lsm303dlhc: wait for mag values... ");
while (gpio_read(dev->mag_pin) == 0){}
DEBUG("read ... ");
i2c_acquire(dev->i2c);
res = i2c_read_regs(dev->i2c, dev->mag_address,
LSM303DLHC_REG_OUT_X_H_M, data, 6);
i2c_release(dev->i2c);
if (res < 6) {
DEBUG("[!!failed!!]\n");
return -1;
}
DEBUG("[done]\n");
/* interchange y and z axis and fix endiness */
int16_t tmp = data->y_axis;
data->x_axis = ((data->x_axis<<8)|((data->x_axis>>8)&0xff));
data->y_axis = ((data->z_axis<<8)|((data->z_axis>>8)&0xff));
data->z_axis = ((tmp<<8)|((tmp>>8)&0xff));
/* compensate z-axis sensitivity */
/* gain is currently hardcoded to LSM303DLHC_GAIN_5 */
data->z_axis = ((data->z_axis * 400) / 355);
return 0;
}
int lsm303dlhc_read_temp(const lsm303dlhc_t *dev, int16_t *value)
{
int res;
i2c_acquire(dev->i2c);
res = i2c_read_regs(dev->i2c, dev->mag_address, LSM303DLHC_REG_TEMP_OUT_H, value, 2);
i2c_release(dev->i2c);
if (res < 2) {
return -1;
}
*value = (((*value) >> 8) & 0xff) | (*value << 8);
DEBUG("LSM303DLHC: raw temp: %i\n", *value);
return 0;
}
int lsm303dlhc_disable(const lsm303dlhc_t *dev)
{
int res;
i2c_acquire(dev->i2c);
res = i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CTRL1_A, LSM303DLHC_CTRL1_A_POWEROFF);
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_MR_M, LSM303DLHC_MAG_MODE_SLEEP);
res += i2c_write_reg(dev->i2c, dev->acc_address,
LSM303DLHC_REG_CRA_M, LSM303DLHC_TEMP_DIS);
i2c_release(dev->i2c);
return (res < 3) ? -1 : 0;
}
int lsm303dlhc_enable(const lsm303dlhc_t *dev)
{
int res;
uint8_t tmp = (LSM303DLHC_CTRL1_A_XEN
| LSM303DLHC_CTRL1_A_YEN
| LSM303DLHC_CTRL1_A_ZEN
| LSM303DLHC_CTRL1_A_N1344HZ_L5376HZ);
i2c_acquire(dev->i2c);
res = i2c_write_reg(dev->i2c, dev->acc_address, LSM303DLHC_REG_CTRL1_A, tmp);
tmp = (LSM303DLHC_CTRL4_A_BDU| LSM303DLHC_CTRL4_A_SCALE_2G | LSM303DLHC_CTRL4_A_HR);
res += i2c_write_reg(dev->i2c, dev->acc_address, LSM303DLHC_REG_CTRL4_A, tmp);
res += i2c_write_reg(dev->i2c, dev->acc_address, LSM303DLHC_REG_CTRL3_A, LSM303DLHC_CTRL3_A_I1_DRDY1);
gpio_init(dev->acc_pin, GPIO_IN);
tmp = LSM303DLHC_TEMP_EN | LSM303DLHC_TEMP_SAMPLE_75HZ;
res += i2c_write_reg(dev->i2c, dev->mag_address, LSM303DLHC_REG_CRA_M, tmp);
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_CRB_M, LSM303DLHC_GAIN_5);
res += i2c_write_reg(dev->i2c, dev->mag_address,
LSM303DLHC_REG_MR_M, LSM303DLHC_MAG_MODE_CONTINUOUS);
i2c_release(dev->i2c);
gpio_init(dev->mag_pin, GPIO_IN);
return (res < 6) ? -1 : 0;
}
|