a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
|
/*
* Copyright (C) 2015 Eistec AB
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup drivers_ina220
* @{
*
* @file
* @brief Device driver implementation for Texas Instruments INA220 High
* or Low Side, Bi-Directional CURRENT/POWER MONITOR with Two-Wire
* Interface
*
* @author Joakim Nohlgård <joakim.nohlgard@eistec.se>
*
* @}
*/
#include <stdint.h>
#include "ina220.h"
#include "ina220-regs.h"
#include "periph/i2c.h"
#include "byteorder.h"
#define ENABLE_DEBUG (0)
#include "debug.h"
/** @brief Read one 16 bit register from a INA220 device and swap byte order, if necessary. */
static int ina220_read_reg(const ina220_t *dev, uint8_t reg, uint16_t *out)
{
union {
uint8_t c[2];
uint16_t u16;
} tmp = { .u16 = 0 };
int status = 0;
status = i2c_read_regs(dev->i2c, dev->addr, reg, &tmp.c[0], 2);
if (status != 2) {
return -1;
}
*out = ntohs(tmp.u16);
return 0;
}
/** @brief Write one 16 bit register to a INA220 device and swap byte order, if necessary. */
static int ina220_write_reg(const ina220_t *dev, uint8_t reg, uint16_t in)
{
union {
uint8_t c[2];
uint16_t u16;
} tmp = { .u16 = 0 };
int status = 0;
tmp.u16 = htons(in);
status = i2c_write_regs(dev->i2c, dev->addr, reg, &tmp.c[0], 2);
if (status != 2) {
return -1;
}
return 0;
}
int ina220_init(ina220_t *dev, i2c_t i2c, uint8_t address)
{
/* write device descriptor */
dev->i2c = i2c;
dev->addr = address;
return 0;
}
int ina220_set_calibration(const ina220_t *dev, uint16_t calibration)
{
return ina220_write_reg(dev, INA220_REG_CALIBRATION, calibration);
}
int ina220_set_config(const ina220_t *dev, uint16_t config)
{
return ina220_write_reg(dev, INA220_REG_CONFIGURATION, config);
}
int ina220_read_shunt(const ina220_t *dev, int16_t *voltage)
{
return ina220_read_reg(dev, INA220_REG_SHUNT_VOLTAGE, (uint16_t *)voltage);
}
int ina220_read_bus(const ina220_t *dev, int16_t *voltage)
{
return ina220_read_reg(dev, INA220_REG_BUS_VOLTAGE, (uint16_t *)voltage);
}
int ina220_read_current(const ina220_t *dev, int16_t *current)
{
return ina220_read_reg(dev, INA220_REG_CURRENT, (uint16_t *)current);
}
int ina220_read_power(const ina220_t *dev, int16_t *power)
{
return ina220_read_reg(dev, INA220_REG_POWER, (uint16_t *)power);
}
|