a752c7ab
 elopes
add first test an...
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/*
* Copyright(C) 2016,2017, Imagination Technologies Limited and/or its
* affiliated group companies.
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*
*/
#include <stdint.h>
#include "vendor/p32mx470f512h.h"
/*
* DEVCFG3 @ 0x1FC02FF0
*
*
* USERID
* FSRSSEL 7 Assign IPL 7 to a shadow register set.
* PMDLIWAY 1
* IOL1WAY 1
* FUSBIDIO OFF USB USBID Selection Controlled by Port Function
* FVBUSONIO ON VBUSON pin is controlled by the USB module function
*/
volatile uint32_t _DEVCFG3 __attribute__((used, section(".devcfg3"))) =
0x0 /* unused bits must be 0 */
| (_DEVCFG3_USERID_MASK & 0xFFFF << _DEVCFG3_USERID_POSITION)
| (_DEVCFG3_FSRSSEL_MASK & 7 << _DEVCFG3_FSRSSEL_POSITION)
| (_DEVCFG3_PMDL1WAY_MASK & 1 << _DEVCFG3_PMDL1WAY_POSITION)
| (_DEVCFG3_IOL1WAY_MASK & 1 << _DEVCFG3_IOL1WAY_POSITION)
| (_DEVCFG3_FUSBIDIO_MASK & 0 << _DEVCFG3_FUSBIDIO_POSITION)
| (_DEVCFG3_FVBUSONIO_MASK & 1 << _DEVCFG3_FVBUSONIO_POSITION);
/* Note this sets the PLL to 96MHz (8/2 * 24) which is only supported by 3xx
* and 4xx parts and assumes an 8MHz XTAL.
*
* 1xx/2xx/53x/57x only support 50MHz (use 8/2 x 24 / 2 = 48Mhz)
* 5xx/6xx/7xx only support 80Mhz (use 8/2 * 20 = 80MHz).
*
*
* DEVCFG2 @ 0x1FC02FF4 (
*
* FPLLIDIV DIV_2 System PLL Input Divider 2x Divider
* FPLLMUL 24x System PLL Multiplier PLL Multiply by 24, 8/2 x 24 = 96MHz
* UPLLIDIV DIV_12x USB PLL divider
* UPLLEN OFF USB PLL disabled
* FPLLODIV DIV_1 System PLL Output Clock Divider 1x Divider
*/
volatile uint32_t _DEVCFG2 __attribute__ ((used, section(".devcfg2"))) =
0xffffffff /* unused bits must be 1 */
& (~_DEVCFG2_FPLLIDIV_MASK | 1 << _DEVCFG2_FPLLIDIV_POSITION)
& (~_DEVCFG2_FPLLMUL_MASK | 7 << _DEVCFG2_FPLLMUL_POSITION)
& (~_DEVCFG2_UPLLIDIV_MASK | 7 << _DEVCFG2_UPLLIDIV_POSITION)
& (~_DEVCFG2_UPLLEN_MASK | 0 << _DEVCFG2_UPLLEN_POSITION)
& (~_DEVCFG2_FPLLODIV_MASK | 0 << _DEVCFG2_FPLLODIV_POSITION);
/*
* DEVCFG1 @ 0x1FC02FF8
*
* FNOSC PRIPLL Oscillator Selection Bits Primary Osc w/PLL (XT+,HS+,EC+PLL)
* FSOSCEN ON Secondary Oscillator Enable Enabled
* IESO ON Internal/External Switch Over Enabled
* OSCIOFNC OFF CLKO Output Signal Active on the OSCO Pin Disabled
* FPBDIV DIV_1 Peripheral Clock Divisor Pb_Clk is Sys_Clk/1
* FCKSM CSDCMD Clock Switching and Monitor Selection Clock Switch Disable, FSCM Disabled
* WDTPS PS2 Watchdog Timer Postscaler 1:2
* WINDIS OFF Watchdog Timer Window Enable Watchdog Timer is in Non-Window Mode
* FWDTEN OFF Watchdog Timer Enable WDT Disabled (SWDTEN Bit Controls)
* FWDTWINSZ 25%
*/
volatile uint32_t _DEVCFG1 __attribute__ ((used, section(".devcfg1"))) =
0xffffffff /* unused bits must be 1 */
& (~_DEVCFG1_FNOSC_MASK | 3 << _DEVCFG1_FNOSC_POSITION)
& (~_DEVCFG1_FSOSCEN_MASK | 1 << _DEVCFG1_FSOSCEN_POSITION)
& (~_DEVCFG1_IESO_MASK | 1 << _DEVCFG1_IESO_POSITION)
& (~_DEVCFG1_POSCMOD_MASK | 1 << _DEVCFG1_POSCMOD_POSITION)
& (~_DEVCFG1_OSCIOFNC_MASK | 1 << _DEVCFG1_OSCIOFNC_POSITION)
& (~_DEVCFG1_FPBDIV_MASK | 0 << _DEVCFG1_FPBDIV_POSITION)
& (~_DEVCFG1_FCKSM_MASK | 3 << _DEVCFG1_FCKSM_POSITION)
& (~_DEVCFG1_WDTPS_MASK | 1 << _DEVCFG1_WDTPS_POSITION)
& (~_DEVCFG1_WINDIS_MASK | 0 << _DEVCFG1_WINDIS_POSITION)
& (~_DEVCFG1_FWDTEN_MASK | 0 << _DEVCFG1_FWDTEN_POSITION)
& (~_DEVCFG1_FWDTWINSZ_MASK | 3 << _DEVCFG1_FWDTWINSZ_POSITION);
/*
* DEVCFG0 @ 0x1FC02FFC
*
* DEBUG OFF Background Debugger Enable Debugger is disabled
* JTAGEN ON JTAG Enable JTAG Port Enabled
* ICESEL ICS_PGx1 CE/ICD Comm Channel Select Communicate on PGEC1/PGED1
* PWP OFF Program Flash Write Protect Disable
* BWP OFF Boot Flash Write Protect bit Protection Disabled
* CP OFF Code Protect Protection Disabled
*/
volatile uint32_t _DEVCFG0 __attribute__ ((used, section(".devcfg0"))) =
0x7fffffff /* unused bits must be 1 except MSB which is 0 for some odd reason */
& (~_DEVCFG0_DEBUG_MASK | 3 << _DEVCFG0_DEBUG_POSITION)
& (~_DEVCFG0_JTAGEN_MASK | 1 << _DEVCFG0_JTAGEN_POSITION)
& (~_DEVCFG0_ICESEL_MASK | 3 << _DEVCFG0_ICESEL_POSITION)
& (~_DEVCFG0_PWP_MASK | 0xff << _DEVCFG0_PWP_POSITION)
& (~_DEVCFG0_BWP_MASK | 1 << _DEVCFG0_BWP_POSITION)
& (~_DEVCFG0_CP_MASK | 1 << _DEVCFG0_CP_POSITION);
/*
* Without a reference to this function from elsewhere LD throws the whole
* compile unit away even though the data is 'volatile' and 'used' !!!
*/
void dummy(void)
{
(void)1;
}
|